Crutchfield Canada

Crutchfield: Legendary Service. Since 1974.SM
1-833-920-4540
Crutchfield Canada

Crutchfield: Legendary Service. Since 1974.SM
Your cart
Chat
Contact us
Close contact box

Our hours

Monday-Friday:
9 am - 6 pm est
Lunes a viernes:
9 am - 6 pm este
Estamos disponibles 5 días a la semana
Looking for International Support?
Connect ID #
195 860 79

Shop smart & save time when you connect with an advisor

1.
Call us at 1-833-920-4540
2.
Mention Connect ID number:
195 860 79
3.
Your advisor will be able to share relevant pages and add items to your cart
Your security and privacy are ensured. Our advisors cannot see anything that is on your computer. They only have the ability to "serve" a page from our site and put items in your cart. You’re in control at all times, and you can disconnect at any time by closing your browser window.
1-833-920-4540

Our hours

Monday-Friday:
9 am - 6 pm est
Lunes a viernes:
9 am - 6 pm este
Estamos disponibles 5 días a la semana
Looking for International Support?
Connect ID #
195 860 79

Shop smart & save time when you connect with an advisor

1.
Call us at 1-833-920-4540
2.
Mention Connect ID number:
195 860 79
3.
Your advisor will be able to share relevant pages and add items to your cart
Your security and privacy are ensured. Our advisors cannot see anything that is on your computer. They only have the ability to "serve" a page from our site and put items in your cart. You’re in control at all times, and you can disconnect at any time by closing your browser window.

Sorry, chat is currently unavailable

Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

PAC HDK001X Dash and Wiring Kit Install and connect a single-DIN receiver in select 1998-2013 Harley-Davidson models (Black)

PAC

Item # 541HDK001X

This PAC HDK001X factory dash and wiring kit allows you to install a single-DIN (2" tall) radio in select...

Find what Fits your vehicle

Remove

Checking fit...

PAC HDK001X Dash and Wiring Kit - Front

PAC HDK001X Dash and Wiring Kit

PAC HDK001X Dash and Wiring Kit

PAC HDK001X Dash and Wiring Kit

PAC HDK001X Dash and Wiring Kit

PAC HDK001X Dash and Wiring Kit

PAC HDK001X Dash and Wiring Kit

PAC HDK001X Dash and Wiring Kit Front
PAC HDK001X Dash and Wiring Kit Other
PAC HDK001X Dash and Wiring Kit Other
PAC HDK001X Dash and Wiring Kit Other
PAC HDK001X Dash and Wiring Kit Other
PAC HDK001X Dash and Wiring Kit Other
PAC HDK001X Dash and Wiring Kit Other

This PAC HDK001X factory dash and wiring kit allows you to install a single-DIN (2" tall) radio in select...

Item # 541HDK001X

Free shipping

In stock
C$167.99
Add to cart Buy nowCheckout now with PayPal
Add to wishlist

About the PAC HDK001X Dash and Wiring Kit

Bob Bihlmayer

by Crutchfield's Bob Bihlmayer

PAC HDK001X

This PAC HDK001X factory dash and wiring kit allows you to install a single-DIN (2" tall) radio in select 1998-2013 Harley-Davidson models with factory fairings. It includes a pre-programmed interface to retain the factory handlebar audio controls and a pre-wired installation harness that requires no cutting of any factory wires. The kit features two options of frames for the aftermarket radio installation (with or without a hinged tinted/UV protective cover). Warranty: 1 year.

PAC HDK001X

This PAC HDK001X factory dash and wiring kit allows you to install a single-DIN (2" tall) radio in select 1998-2013 Harley-Davidson models with factory fairings. It includes a pre-programmed interface to retain the factory handlebar audio controls and a pre-wired installation harness that requires no cutting of any factory wires. The kit features two options of frames for the aftermarket radio installation (with or without a hinged tinted/UV protective cover). Warranty: 1 year.

Note: You'll only retain your handlebar audio controls with cars stereos made by  Alpine, Clarion, Dual, Kenwood, Jensen, JVC, Pioneer, Sony, or Valour.

READ LESS

What's in the box:

PAC HDK001X Dash and Wiring Kit owner's manual

  • Radio housing
  • Radio housing w/ splash-guard
  • Handlebar control interface module
  • Wiring harness
  • Rubber gasket (pre-installed)
  • 2 Brackets
  • 2 Spacers
  • 4 Long bolts
  • 4 Short bolts
  • 4 Hex-nuts
  • Instructions
MFR #HDK001X

Featured review

A great package. This particular piece allows you to customize your button functionality and get dual functionality out of certain bar controls. The kit is very well built better than many others I've used.

Ryan from Gas City, IN

See all 29 reviews

Customer reviews for PAC HDK001X Dash and Wiring Kit

Loading reviews...

Average review:

4.0 out of 5 stars
29 reviews

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Have questions for
Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the PAC HDK001X Dash and Wiring Kit

Stacey B.
Researched by Crutchfield's Stacey B.

Product Research

Features

Harley Davidson Radio Replacement Kit: The PAC HDK001K radio replacement kit makes it possible for Harley Davidson motorcycle enthusiasts to integrate an aftermarket radio into their ride. This Harley Davidson radio replacement kit includes a pre-programmed interface to retain the factory handlebar audio controls, installation harness, two options of radio housings for the aftermarket head unit installation, and mounting hardware.

Compatibility: The PAC HDK001X is compatible with select 1998-2013 Harley-Davidson motorcycles and most aftemarket radios with a wired remote input that are steering wheel control ready.

  • VehicleThe PAC HDK001X is compatible with select 1998-2013 Harley-Davidson motorcycles (FL models with factory fairings). The PAC HDK001X does not retain rear speakers; these will need to be hard wired.
  • Radio: The aftermarket radio must be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible. Not compatible with Sony XAV series head units; Kenwood KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U and KDC-X798 head units, and Alpine UTE-73BT, CDE-172BT, CDE-173BT and CDE-175BT head units.

Radio Housing: The PAC HDK001X comes with two radio mounting kits that will fit most single-DIN aftermarket head units. One of the mounting kits features a hinged tinted/UV protective cover, while the other mounting kit does not.

Retains Handlebar Audio Controls: The included SWI-HD interface module allows you to retain your Harley Davidson's handlebar audio controls. The included SWI-HD interface module is compatible with Alpine, Clarion, Dual, Kenwood, Jensen, JVC, Pioneer, Sony, & Valor aftermarket head unit's that features a SWC input (3.5mm) or SWC wire (Blue/Yellow). The interface comes pre-programmed, but can also be reconfigured.

Wiring Harness: The PAC HDK001X comes with a wiring harness which plugs directly into the included interface module and your Harley Davidson's factory radio plug. You will need to hard-wire the following seven wires of the harness to your new aftermarket head unit's wiring harness.

Wire Color Function
Yellow +12 Volt Constant
Black Ground
Red +12 Volt Accessory
White Left Front Speaker +
White/black Left Front Speaker -
Gray Right Front Speaker +
Gray/black Right Front Speaker -

Installation Note: Factory CB, intercom, and rear volume control functions are integrated into the Harley Davidson stock radio and cannot be retained when adding an aftermarket radio. Depending on bike configuration it may be necessary to install new rear speaker wires.

Loading accessories...

Customer Q&A

10 questions already asked

Q
Will this work with a JVC KD-X35MBS head unit?
mark  Jan 19, 2022
2 answers
A
To be honest with you I would have to do some research to because I had bought a KENWOOD media unit and I asked crutchfield and what they suggested worked perfect for me so my suggestion would be asked one of their rep's they won't steer you wrong.
anthony  Jan 23, 2022
A
It shoudl fit any single din stereo. I put this in my Ultra Classis with a Kenwood head unit and it fit great
daniel  Jan 22, 2022
Q
I installed the fax system on my 1999 ultra there is nowhere to plug in the black Jack into the radio what do I do to make the controls work?
tom  Aug 01, 2021
1 answer
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.
kristina  Aug 05, 2021 (Staff)
Q
I installed this kit it's sending a signal but the handle bar controls aren't working.what am I doing wrong? 08 Harley Davidson Electra glide Ultra Classic
jamie  Jul 19, 2021
7 answers
A
Good morning Jamie I had the same problem and the little blue box has to be set on correct number that goes with your stereo brand and then it worked fine with bar controls
robert  Jul 21, 2021
A
I had Crutchfeild prewire mine it works fine
steven  Jul 20, 2021
A
There is piece of wiring hardware for the handlebar controls. It has a small plastic box with a really small dial with numbers on it. You have to turn the dial to the proper number for the brand of radio you installed. There should be a chart in the paperwork that tells you which number goes with which radio manufacturer.
brent  Jul 20, 2021
A
I installed on my 2010 Ultra Classic CVO and it worked fine. I don't have install guide in front of me, but i recall some possible DIP switch settings...?
pat  Jul 20, 2021
A
I meant the dial switch
mr. charles ric  Jul 20, 2021
A
Did you adjust the dip switches on the control to match the stereo you installed?
mr. charles ric  Jul 20, 2021
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. Kenny Crutchfield Corporation
kenneth  Jul 20, 2021 (Staff)
Q
i have a 2004 Electra Glide without a radio - will this kit plug into the existing wire harness? I recently purchased a Kenwood KMM - Bt228U
alan  Nov 14, 2020
2 answers
A
As long as your bike has the radio thumb controls on the handlebars and has all the factory wiring for a radio this kit will work. It plugs into the harness that used to plug into the back of the factory radio. Works great with most radios that have SWC (Steering wheel control) capabilities. PAC tech support is excellent too.
michael  Nov 19, 2020
A
Yeah it should plug in no problem. I've used one on an 05 before.
colton  Nov 15, 2020
Q
The harness I have has 2 yellow and 2 black wires. Can you tell me what wires I'm supposed to use?
nick  Oct 14, 2020
1 answer
A
Typically any same colored wires like this will just be tied together. The picture doesn't show any duplicates like this but in most cases that's all you'd do.
colton  Oct 14, 2020
Q
Will this Dash and Wiring Kit paired with a Sony DSX-M55BT work on my 2005 Harley Davidson FLHTCSE2 CVO model?
james  Aug 29, 2020
2 answers
A
Yes the mounting kit will work but you would have to look on the PAC-audio website or call their tech support to verify it works with that particular stereo but if it has SWC input on stereo it will likely work.
michael  Nov 19, 2020
A
More than likely, I installed it in my 2010 Ultra Classic CVO and it fit perfectly....nice kit overall....
pat  Aug 30, 2020
Q
Replacing my Harley radio with a pioneer mvh512bs media recover not sure wether to hook inter face to remote wire or plug into aux port on front of radio?
matthew  Apr 01, 2019
2 answers
A
Hook to the remote wire.
james  Apr 02, 2019
A
Pioneer should be the aux port
jason  Apr 02, 2019
Q
Will this work with Kenwood kmr m322 bt?
rob  Feb 25, 2018
1 answer
A
Yes. The kit is made for use with standard single DIN chassis stereos and the Kenwood KMR-M322BT stereo is a standard single DIN chassis model. I hope that helps. My bio: https://www.crutchfield.com/bio/Ryan
ryan  Mar 14, 2018 (Staff)
Q
Will this allow the rear speakers on my ultra to power on too ?
nicky  Oct 04, 2017
3 answers
A
None of these will accommodate the rear speakers. And if it's the factory amplified model then you won't get any sound at all. Any of these kits are made for a street glide (just fairing speakers) and to retain handle controls. They are not audio devices like you'd expect in a car. Front L&R connections only
colton  Oct 14, 2020
A
Yes it will. It worked on my Electra Glide
do not want bus  Oct 04, 2017
A
No it will not. U will have to find the wires to the rear speakers and connect them to the radio.
jonathan  Oct 04, 2017
Q
is this in stock?
debbie  Mar 15, 2017
1 answer
A
Thanks for your question. Yes we currently have 30+ in our warehouse. Hope that helps.
kenneth  Mar 15, 2017 (Staff)
SHOW MORESHOW LESS

Loading articles...

Related searches

Searches related to the PAC HDK001X Dash and Wiring Kit Install and connect a single-DIN receiver in select 1998-2013 Harley-Davidson models.

Compare the sound