Chat
Contact us
Close contact box
Connect ID #
774 865 59
Connect ID #
774 865 59

Sorry, chat is currently unavailable

Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Rockford Fosgate P3SD4-10 Punch Stage 3 shallow-mount 10" subwoofer with dual 4-ohm voice coils

Item # 575P3S410

Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real deal bass.

Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real deal bass.

Item # 575P3S410

In stock
C$299.99 each

About the Rockford Fosgate P3SD4-10

John Pollard

Rockford's bass pedigree

Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low end in smaller or hard-to-fit vehicles.

Rockford's bass pedigree

Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low end in smaller or hard-to-fit vehicles.

Side view of P3SD4-10 shallow subwoofer

Advanced engineering

The P3SD4-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive, yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.

Powerful bass for a tight space

A low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — just build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax optimum performance from your amplifier.

Subwoofer Wiring Diagrams

To see sample wiring diagrams for all common subwoofer/amplifier combinations, check out this informative article.

READ LESS

Product highlights:

  • 10" shallow-mount subwoofer with dual 4-ohm voice coils
  • anodized aluminum cone with M-Roll Santoprene™ surround
  • power range: 50-300 watts RMS (150 watts per voice coil)
  • peak power handling: 600 watts
  • frequency response: 40-250 Hz
  • sensitivity: 83 dB
  • top-mount depth: 3-9/16"
  • sealed box volume: 0.40-1.00 cubic feet
  • ported box volume: 1.00 cubic feet
  • grille not included
  • warranty: 1 year
  • MFR # P3SD4-10

What's in the box:

  • One shallow-mount 10" Dual 4-ohm voice coil woofer
  • 1 Aluminum trim ring
  • Eight 1-1/8" Allen head self-tapping screws
  • 4mm Allen head bit
  • Installation and Operation manual (English/ French/ Spanish/ German)

Customer reviews for Rockford Fosgate P3SD4-10

Loading reviews...

Average review:

4.5 out of 5 stars
28 reviews

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Rockford Fosgate P3SD4-10

Pat M.

Product Research

Features
Enclosure Compatibility

Features

Shallow Mount Design: The Rockford Fosgate Punch P3SD4-10 Shallow Subwoofer is designed and engineered with a more shallow motor assembly which reduces the overall depth of the woofer, allowing it to fit in smaller locations in your vehicle. The P3SD4-10 used an anodized aluminum cone and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.

Dual Voice Coils: This woofer features dual 4-ohm voice coils for wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 2-ohm load. When the voice coils are wired in series, the woofer presents an 8-ohm load.

CEA-2031 Compliant: Power handling on the P3SD4-10 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils.

FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.

VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.

Anodized Aluminum Voice Coil Former: Aluminum voice coil formers offer superior heat dissipation over other commonly used materials. The hard-anodized finish increases the former strength. These two factors combine to improve the overall power handling characteristics of the subwoofer.

Spring Post Assemblies: The woofer features custom insulated/isolated compression input terminals with attached flexible, 16-gauge stitched tinsel lead wires that can withstand extreme duty cycles, fatigue and high current. The heavy-duty spring posts will accept pin connectors, single banana plugs, and bare wire up to 10-gauge.

Trim Ring: For added cosmetic appeal the woofer comes with an aluminum trim ring that mounts over the flange of the woofer. When using the trim ring, the woofer is first mounted with four screws, then the ring is mounted over the woofer, aligning the final four holes of the woofer with ring. The other four screws are used in these holes to mount the ring and woofer to the enclosure. The trim ring increases the top-mounting height of the woofer to 1.0 inch and the ring diameter is 11.3 inches.

Break-In Period: Due to the design of the Rockford Fosgate P3 Shallow subwoofer, a 24 to 48 hour break-in period is required to allow for maximum excursion and low frequency extension. The shallow woofer suspension is intentionally designed to optimize once the internal components are exercised under normal music listening conditions.

Enclosure Compatibility

Sealed Box Volume: The sealed box size range recommended by Rockford Fosgate is 0.40 to 1.0 cubic feet. Within this range, the ideal recommended size is 0.5 cubic feet, resulting in a 3dB down point of 46.9 Hz and a Qtc of 0.90.

Vented Box Volume: The vented box size recommended by Rockford Fosgate is 1.0 cubic feet. One 4" diameter x 12" long port should be used, resulting in a tuning frequency of 47.5 Hz and a 3dB down point of 36 Hz.

Loading accessories...

Customer Q&A

5 questions already asked

Q
Will this work with 150 watts a 4 ohms?
timothy  Nov 09, 2023
1 answer
A
It is not possible to achieve a 4-ohm total impedance while using a single P3SD4-10. It's two voice coils can only be wired to either a 2-ohm or an 8-ohm impedance. For additional help with selecting subs and pairing them with amplifiers, please reach out to our advisors via online chat or phone at 1-800-324-9695.
zachary  Nov 09, 2023 (Staff)
Q
what frequency should I set my subwoofer amp for this sub?
richard  Nov 26, 2022
1 answer
A
There's going to be some personal preference involved here for sure Richard, But I can give you some tips. If you are using a sealed box and listen to music where you prefer a nice, tight kick drum you are going to want to have your low pass crossover set somewhere around 50-60hz. This is a great place to start. If you are using a ported box and prefer bigger bass drops and an overall larger bass sound, feel free to set that low pass crossover up at 80hz or even as high as 100hz depending on your music listening habits and speaker setup. We provide lifetime Technical Support so you can always call us, we can help you tune!
bo  Nov 26, 2022 (Staff)
Q
My amp recommends at least a 4ohm load. Should I get the 4ohm DVC version or the 2ohm? I should be able to wire this to get 8ohms but is that optimal when i could wire the 2ohm dvc version to be a 4ohm load at the amp?
isaac  Aug 26, 2016
1 answer
A
Thanks for your question. For information on selecting the best sub for your amp I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the models and help you make the best choice for your system.
kenneth  Aug 26, 2016 (Staff)
Q
I just purchased (2) RF P3SD4-10's and the box for under my back seat in my 2009 F-150. What amp should I purchase? (Watts, ohms & how should I wire it with my new (2) 4 ohm subs
michael  Oct 16, 2014
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
kristina  Oct 17, 2014 (Staff)
SHOW MORESHOW LESS

Loading articles...

Compare the sound