Contact us
Close contact box
Connect ID #
631 708 82

Our hours

Connect ID #
631 708 82
Chat
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

We're sorry, chat is not available at this time.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-800-297-9469

Thank you, !
Our conversation will be emailed to
Please enter a question  
Please select an email topic.  

Looking for tech support?
Please call us at 1-800-297-9469

Need help now?
Call an advisor: 1-888-955-6000

Please enter your name.  
Please enter your US phone number.  
Please enter an email.  
Please enter an email.  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Our current email response time is
48-72 hours

Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  

Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

How to mount a Bluetooth microphone in your car

Quick tips and tool suggestions to help with the installation

In a nutshell: This article will give you some handy info about installing your new car stereo's Bluetooth® microphone in your car or truck.

If your new receiver includes a Bluetooth microphone, you’ll need to connect and mount it as part of the stereo installation process. Yes, it’s an extra step in the installation, but it’s actually pretty easy. Here are a few tips from our experts to get you going.

Locations

Where you mount your mic is up to you

Decide where to mount the microphone

Where you put it is up to you — the top of the steering column is a good spot, as is the visor or even the A-pillar. It all depends on what works best for you and your vehicle. Wherever you decide to locate the mic, you can aim it right at your face for the best possible voice pickup.

Wires to mic

The microphone cable connects to the rear of your new receiver

Route the mic cable to the rear of the stereo 

The mic’s thin cable is easy to tuck out of sight, whether you’re mounting it up on the visor or down on the steering column. If you’re mounting it on the visor or A-pillar, you’ll want to tuck the cable behind the trim panels on the way down. This is pretty easy, but you might need to use a panel tool to loosen up the panels.

Using wire worm.

Using a Wire Worm takes a lot of the hassle out of running wires through the dash

Take care while running the cable

One way or another, the cable will wind up going behind the steering column and up into the radio cavity. A Pro.Fit Wire Worm can be a big help when you're running the cable into the dash. Just be sure to avoid important things like the steering column and other moving parts while you're working. It might be helpful to use some cable ties to secure the cable along its run.

kenwood bluetooth microphone

A well-located mic will make your conversations clearer

Watch the video

Now that you've seen the basics, here's one of our helpful Crutchfield advisors, JR, to walk you through the process during a recent car stereo installation here at our HQ. 

We're here to help when you need us

Every vehicle is different, but these basics should serve you well when you install your Bluetooth microphone. And when you buy your gear from Crutchfield, you'll get our free tech support for the life of your gear. If you have installation questions, our Virginia-based tech team is here to help, seven days a week.

Last updated 12/4/2019

Please share your thoughts below.