Chat
Contact us
Close contact box
Connect ID #
091 085 59
Connect ID #
091 085 59

Sorry, chat is currently unavailable

Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Nautical networking with NMEA 2000

Build a system that's right for your boat

Visual example of a marine electronics system using NMEA-2000.

A complete marine electronics system used to resemble a dysfunctional office – each device did its job, but they really didn't talk to each other. Thanks to NMEA 2000 technology, though, today's marine gear can work together seamlessly to give you more information and entertainment than ever before.

What is NMEA 2000?

NMEA 2000 is a "plug and play" communications networking protocol that allows devices as varied as receivers, chartplotters, GPS units, wired remotes, and wind instruments to function as one complete system. Developed and maintained by the National Marine Electronics Association (NMEA – get it?), it's similar in concept to the CAN-Bus systems found in cars and trucks. It's a way to make all of your gear work together as a single system, and also makes it easy to incorporate new devices. NMEA 2000 replaced the old NMEA 0183 protocol, and in addition to offering vastly improved functionality, it has a much cooler name.

NMEA 2000 starter kit

Garmin’s NMEA 2000 Starter Kit will be the foundation of your new NMEA 2000 network.

It takes a backbone

The key to a NMEA 2000 network is the "backbone," (or "trunk") a central cable running throughout the vessel. The backbone is connected to the boat's power and ground, and your NMEA 2000 devices are connected to the backbone via special T-connectors, sometimes referred to as "drop tees." The beauty of this networking system is that it allows different devices (even ones from different manufacturers) to communicate with one another.

It's light-years ahead of the stacks of various devices found on so many boats, and it's a ton easier than wiring all this stuff in one by one. Our brilliant and talented (good-lookin', too…) tech advisors get very nervous when we use the phrase "plug and play," but that's a reasonably accurate description of the connection itself. The actual installation will probably involve some challenges, but that really depends on your boat and the network you're trying to build.

Several marine electronics manufacturers have networks of their own. Some of them work with NMEA 2000, while others are proprietary, and require adapters to plug into a backbone. When you see the phrase "NMEA 2000 Certified" on a piece of electronic gear, from, let's say, Fusion, you'll know that the device will work with your existing NMEA 2000 network.

So, how will NMEA 2000 work for me?

The size of the network you build will mostly depend on the size of the boat you have. On a smaller boat, a receiver and a chartplotter are probably all you need, but if you have a larger vessel or a frequent need to have remote controllers handy (like on a swim platform, for example), you can add more NMEA 2000-compatible devices. The limit is 50, which is a lot more than the average boater will ever need!

Everything starts with that backbone, so it's smart to buy a good one. Garmin’s NMEA 2000 Starter Kit (above) has the essentials you need to install a communications network in your boat, including a drop cable, backbone cable, power cable, T-connectors, and terminator connectors.

Image of a chartplotter.

Many Garmin chartplotters are compatible with your NMEA 2000 network

Start building your NMEA 2000 network

There are a lot of NMEA 2000-compatible devices out there, and what you add to your system depends on what type of boater you are. Just because you can add 50 devices to your system doesn't mean you should – that's a limit, not a dare!

Most boaters will be totally okay with a marine receiver, a chartplotter, and/or a marine remote control. Other, more specialized, devices that will work include autopilots, depth finders, wind instruments, and compasses.

If you're ready to start putting your network together, our expert marine audio advisors are here to help. Give us a call or chat today!

  • james from peoria

    Posted on 9/3/2023

    good

  • Enrique from Pasadena

    Posted on 10/4/2020

    Will the Jl Audio MMR-40 work with the fusion BB300? If it does will it control tree zones? I have a Garmin 94SV that I control the BB300. My amp and all speakers are JL Audio so for esthetics I would like to use a JL Audio remote head instead of the Fusion NRX 300 .

    Commenter image

    Jon Paul from Crutchfield

    on 10/5/2020

    Enrique, With questions like that, it's always better to have a conversation with a real live human. Give us a call and talk to one of our advisors. We can help you choose the right gear and give you the right advice on how to install it.
  • Bill from Pittsburgh

    Posted on 9/16/2020

    How long can my NEMA 2000 backbone cable be. I need it to be about 45 FT from Bridge to Lower Audio Cabnit

    Commenter image

    Jon Paul from Crutchfield

    on 9/16/2020

    Bill, With questions like that, it's always better to have a conversation with a real live human. Give us a call and talk to one of our advisors. We can help you choose the right gear and give you the right advice on how to install it.

Looking for
boat accessories?

Boat Accessories Shop our selection

Find what Fits your vehicle

Remove

Checking fit...

Compare the sound