Chat
Contact us
Close contact box
Connect ID #
638 797 64
Connect ID #
638 797 64
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

Our contact center is currently closed.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-888-292-2575

Thank you, !
Our conversation will be emailed to
Chat Advisor Image

Your Advisor,

More about me
Please enter a question  
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  

Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

AudioSource AD508

8-channel multi-room digital power amplifier

Item # 021AD508

This high-current, four-zone amp powers up to eight speakers simultaneously, with multiple inputs for your sources.

This high-current, four-zone amp powers up to eight speakers simultaneously, with multiple inputs for your sources.

Item # 021AD508

In stock
C$1,399.99

About the AudioSource AD508

Play music in four rooms at the same time

Did you buy a house that came with speakers already installed in the walls or ceilings? Or are you planning to put in a system like that from scratch? In either case, I can recommend AudioSource's AD508 as an amplification option for your medium-sized home.

Play music in four rooms at the same time

Did you buy a house that came with speakers already installed in the walls or ceilings? Or are you planning to put in a system like that from scratch? In either case, I can recommend AudioSource's AD508 as an amplification option for your medium-sized home.

This high-current, four-zone amp powers up to eight speakers simultaneously. It's flexible too. Play the same source through all four zones, or have a different source play in each of your zones.

Plenty of power under the hood

AudioSource made sure that the '508 has enough horsepower for your speakers. It delivers 65 watts per channel into eight ohms, and a robust 100 watts per channel into four ohms. Need a mountain of power to drive your heavy-duty outdoor or floor-standing speakers? Bridge two channels together and get a mighty 200 watts per channel into eight ohms.

Versatile inputs...

The AD508 offers two pairs of RCA inputs, as well as one optical digital input. These are handy for playing multiple sources in your various listening rooms at the same time. Each zone also has a dedicated pair of RCA inputs for playing a "local" source in that room only.

...and outputs

Want to expand your multi-room system? Use the RCA outputs to feed audio signals to an additional amp of your choice.

Multiple power-on options

The '508 can be turned on manually, or automatically when it detects a source. It's also 12-volt trigger compatible, so you can have it turn on when another piece of equipment is fired up.

Rear-mounted bass and treble controls provide tone adjustments.

READ LESS

Product highlights:

  • 65 watts per channel into 8 ohms (20-20,000 Hz) at 0.2% THD with all channels driven
  • 100 watts x 8 into 4 ohms
  • 200 watts x 4 bridged into 8 ohms (at 1 kHz)
  • 8-channel amplifier with 4 independent playback zones
  • play the same source through all 4 zones, or have a different source play in each one
  • high-efficiency switching amplifier design
  • Over Temperature Protection (OTP) gently reduces power if temperature gets too high, avoiding shutoff
  • Over Current Protection (OCP) differentiates between a direct short and a dynamically low speaker impedance
  • optical digital input for connecting a TV, CD player, or network streaming device
  • rear-panel bass and treble controls
  • rear-mounted, independent gain controls for each channel
  • Bus 1 and Bus 2 RCA inputs can be assigned to any channel so that different sources are available for each zone
    • each pair of bus inputs has a corresponding output that can be daisy-chained to another amplifier
  • discrete pairs of "local" RCA inputs for each zone
  • Phoenix-style speaker connectors
  • three power-on modes (normal, signal-sensing, trigger)
  • infrared remote control included
  • rack-mountable with included hardware
    • two-rack spaces high (3.5" tall without feet)
  • frequency response: 20-20,000 Hz
  • signal-to-noise ratio: 100 dB
  • 16-3/4"W x 4"H x 16-5/8"D
  • weight: 32.4 lbs.
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # AD508

What's in the box:

  • 8-Channel/4-Zone power amplifier
  • 6' AC power cord
  • Remote control (CR2025 3V battery installed)
  • 8 Phoenix-style connectors (pre-installed)
  • 2 Rack-mount brackets
  • 4 Short screws
  • 4 Long screws
  • Owner's Manual

Customer reviews

Loading reviews...

AudioSource AD508 reviews

Average review:

8 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the AudioSource AD508

Stacey B.

Product Research

Features

AudioSource AD Series: AudioSource AD series digital amplifiers are designed for home and commercial audio distribution systems where high quality sound, flexibility, and reliability are essential. The AD series offers high efficiency and exclusive features that will make their installation and use easy and convenient.

8-Channel Power Amplifier: The AudioSource AD508 is an 8-channel amplifier that is designed for distributed audio applications. The amplifier can be configured for Stereo (4-ohm minimum) or Bridged (8-ohm minimum) output.

  • Stereo (8-ohm): 65 watts x 8 channel @ 20-20kHz with <0.2 THD+N
  • Stereo (4-ohm): 100 watts x 8 channel @ 20-20kHz with <0.2 THD+N
  • Bridged Mono (8-ohm): 200 watts x 4 channel @ 1kHz with <0.2 THD+N

4 Zones: The AD508 can distribute audio to 4 Zones. You can configure the amplifier to play the same source input (Bus 1/Bus 2) in each Zone, group source inputs (Bus 1/Bus 2) in specific Zones, or have different sources (Line In 1-8) playing in each Zone. Each Zone can consist of one pair of stereo speaker, two speakers in mono, or one Bridged-mono speaker. Each Zone also has independent level control.

Bus Line Inputs & Outputs: The AD508 has two "common" or Bus inputs that receive audio signals from standard line-level audio sources and sends them to any or all channels and zone. The two pair of Bus line outputs are direct feed-through to allow the Bus inputs to be fed to other amplifiers.

  • Bus Level Controls: Each Bus has its own independent level adjustment. This allows the output level of each Bus to be adjusted to make up for different source levels, or to group two different source's volume levels. The Bus Level Control can be operated from the rear-panel or remote control in 1dB increments.
  • Bus Bass & Treble Controls: Bass (100Hz) & Treble (10kHz) can be adjusted (from -12 to +12B) independently for Bus 1 and Bus 2.

Optical Digital Input: The AudioSource AD508 also features an optical (toslink) digital input that is assigned to Bus 1. This digital input only support 2ch PCM (not compatible with Dolby Digital or DTS).

Individual Channel Input: In addition to the Bus line inputs & Optical digital input, the AD508 offers a dedicated input for each of the eight output channels, so you can have a discrete source playing through each connected speaker.

Phoenix-Style Speaker Outputs: The AD508 uses high-quality Phoenix-style connectors for each speaker output (1-8). The Phoenix-style connectors can accept 14-18 gauge speaker wire. There are two sets of Phoenix-style connectors in each Zone (1-4), so you can connect two speakers in stereo, two speakers in mono, or one speaker in Bridged-mono in each Zone.

  • Source Selection: Each output channel (1-8) is capable of delivering source audio from on of 3 inputs - Bus 1, Bus 2, or Line In. You can choose to play the same source or different sources from each output channel.
  • Gain Control: Each output channel (1-8) has its own independent level adjustment. This allows the output level of each speaker to be perfectly matched to its area. It can also be used to limit the maximum audio level in a certain area.

IR Remote: The included IR remote provides wireless operation of the power amplifier. Remote functions consists of Power On/Off, Bus 1 Volume Up/Down, Bus 2 Volume Up/Down, and Mute.

Trigger Input/Output: The AD508 is outfitted with a trigger input and output, each consisting of a 3.5mm minijack terminal. The 3.5mm trigger input will accept a 3-30V AC/DC output from another electronic component device to turn the amplifier On from Standby mode. The A508 also provides a 3.5mm trigger output (12V/500mA) to turn on and off another electronic component device.

Detachable AC Power Cord: The AD508 comes with a detachable 6' AC power cord which will need to be plugged into an AC wall outlet, surge protector, or power conditioner.

Mounting Options: The AudioSource AD508 power amplifier features four heavy-duty feet and can simply be placed on top of a flat surface; like a table-top, shelf, or stand. You can also remove the four feet and rack-mount the amplifier using the included rack-mount ears and screws.

Loading accessories...

Customer Q&A

8 questions already asked

Q
Can I use this and for my SVS ultra towers which have two sets of binding posts in the back for biamping, can I use this in bridge mode into four channels two for each speaker for each one of The binding posts on the back of the speaker will have 200 and 200 going to one single Tower same for the other side?
[ New User  Jun 05, 2021 ]
1 answer
A
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.
[ Calvin  Jul 01, 2021 ]  Staff
Q
Can i have 6 channels with 8 ohm speakers and 2 channels with 4 ohms speakers on this unit?
[ Steven Benfante  Jun 01, 2021 ]
1 answer
A
Yes you can, but pair up the speakers by each set of speaker pairs. In other words, connect your 4 ohm pair to the left and right connectors for output 1 and the 8 ohm pairs to outputs 2-4. The amp will automatically adjust for the resistance of the connected speakers by output pair, but not if you mix a 4 ohm speaker on the right channel and an 8 ohm speaker on the left. Also, you will have more power available to the 4 ohm speakers.
[ Mark  Jun 01, 2021 ]
Q
Can I turn off or control volume on individual zones?
[ Ray  Jan 30, 2021 ]
2 answers
A
yes you can , and also control the left or right control volume to each speaker
[ Steven Benfante  Jan 31, 2021 ]
A
This unit has 2 inputs that you can control the volume independently from the remote. Each Input has it own master gain control as well as treble and bass controls. Off of those 2 inputs, you can split them between any of the 4 zones. 2 speakers per zone, or one if they are bridged like mine:) Each zone can be switched between input 1, 2 or its own line in. Each of the 4 zones has their own left and right gain control as well.
[ john  Jan 30, 2021 ]
Q
Can I bridge this amp to 4 channels to drive my Atmos ceiling speakers? I Vance a monolith 7 channel amplifier driving my 7 surround speakers. Can I run my preamp trigger to the AD508 and then to my 7 channel amp?
[ Randy  Nov 27, 2020 ]
2 answers
A
Yes, you can bridge each speaker pair to go from 8 channel stereo to 4 channel mono. Also, it automatically goes into standby when it doesn't detect an input signal, so you don't really need a trigger. I run a Yamaha preamp/source controlled by an app on my mobile phone. This amp stays in standby (you can also turn it off on the front panel) until I select a source from the app (Bluetooth, optical from my TV, WiFi from a whole range of apps like Sirius, Pandora, etc.) which turns this amp on. I would run your trigger directly to the 7 channel and let this amp turn on whenever it detects an input. That will give you more options. Also of note, this amp is very heavy and the controls other than power on are on the back. If you install it in a rack, no issue of access. However, if it is in a cabinet you will want to set it up properly via the rear controls, use the Phoenix connectors to clamp your speaker wires (14ga or smaller), get the amp close to its final position in the cabinet, plug the Phoenix connectors in and then slide it back into its final position. You will thank me later!
[ Mark  Dec 05, 2020 ]
A
Yes
[ SCOTT A  Dec 05, 2020 ]
Q
Can I run 6 speakers at 8 ohm and bridge the last two channels to run a sub?
[ Jason  Oct 11, 2020 ]
1 answer
A
The way I understand this amp that can be easily accomplished by flipping the bridge switch just above the zone output jacks
[ R Shaw  Oct 12, 2020 ]
Q
Can I feed this with a home theatre receiver and if so what channel, or channels, should I use coming off the theatre receiver?
[ Craig  Sep 25, 2020 ]
1 answer
A
This amp will most commonly be used with home theater receivers that have secondary zone preamp outputs to help power multiple speakers in a that is not the home theater room. It may be best to contact an advisor using 1-800-324-9695 to discuss your goals and gear to get a personal recommendation on new gear to meet your goals
[ Paul  Oct 18, 2020 ]  Staff
Q
Do I need a special connector for my speaker wire to connect to these phoenix connections?
[ David  Apr 23, 2020 ]
6 answers
A
No, you just need bare wire, the picture of the back of the amp does not reflect properly, I thought the same thing.
[ JACK  Apr 24, 2020 ]
A
As long as its not super thick cables, no - connected fine directly. Not my favorite connector, but no adapter needed.
[ Richard  Apr 23, 2020 ]
A
I believe connectors came with the unit. But that being said, on other units I had no special connectors. Check the description and or specs. Also look at the back of the unit where the wire connection are for each speaker.
[ Crawford  Apr 23, 2020 ]
A
No , stripped the wire back twist a little bit of the wire and put it into the connector and tighten screw
[ Steven Benfante  Apr 23, 2020 ]
A
No
[ Steven  Apr 23, 2020 ]
A
The speaker wires are screw tightened into the phoenix connectors.
[ RONALD  Apr 23, 2020 ]
SHOW MORESHOW LESS

Loading articles...

Looking for more?

Check out the next model in this lineup.


Adding...
AudioSource AD5012
12-channel multi-room digital power amplifier
In stock
14 reviews
C$1,649.99
Add to cart

Play music through more rooms

The AudioSource AD5012 offers these features:
  • play music through 12 speakers in six separate zones
  • 50 watts x 12 into 8 ohms, 75 watts x 12 into 4 ohms
  • 125 watts x 6 when bridged into a single 8-ohm load
TOP