About the Denon DP-29F
Dust off those vinyl records and put them back into your listening rotation with the DP-29F turntable from Denon. Even if your receiver or amp does not have a phono input, this versatile turntable will play through your system — you don't even need a phono adapter. The DP-29F includes a built-in phono preamp, so you can hook it up to your system through a standard analog connection. But if your receiver does have a phono input, and you'd prefer to use it, a small switch beneath the platter disengages the preamp.
The DP-29F features an automatic system that starts the music with a simple touch of a button. When the record is finished, the tonearm automatically returns to its original position. By eliminating the need to handle the tonearm manually, you dramatically minimize the chances of inadvertently scratching your records. There's also a manual lifter mechanism that allows you to place the needle on the record wherever you want, just in case you'd like to skip to a song in the middle of a side. And for solid, dependable playback, the DP-29F has been precision manufactured with rigid diecast aluminum for perfectly stable turntable rotation.
- aluminum platter
- built-in RIAA equalizer
- belt-drive system with DC servo motor
- dynamic balance tonearm
- automatic operation
- manual lifter mechanism
- moving magnet cartridge included
- two speeds: 33-1/3 rpm & 45 rpm
- attached RCA audio cable
- wow & flutter 0.15%
- 14-1/16"W x 3-13/16"H x 14-1/8"D
- weight: 6.2 lbs.
- warranty: 2 years
- Our 60-day money-back guarantee
- minor assembly required
- MFR # DP-29F
What's in the box:
- Belt-drive turntable with installed stylus
- 1 Plastic dust cover (installed)
- 1 Aluminum platter
- 1 Rubber drive belt (fitted under the aluminum platter)
- 1 Rubber mat
- One 45-rpm adapter
- Operating Instructions (English/French/Spanish)
- Warranty sheet
- Warranty Registration card
- "Denon Service Network" sheet
More details on the Denon DP-29F
High-precision Diecast Aluminum Turntable: The turntable has been precision manufactured with a rigid diecast aluminum to produce uniform inertial mass for perfectly stable turntable rotation, an essential component of high fidelity sound during playback.
Automated System for Easy Operation: The DP-29F employs an automated system that starts playing the record with the single touch of a button and finishes play at the end of the record by returning the tone arm to its original position and stopping turntable rotation. This system ensures that you do not inadvertently scratch your records when you play them.
Manual Operation: The DP-29F also has a manual lifter mechanism that allows you to place the needle on the record wherever you want, just in case you'd like to skip to a song in the middle of a side.
Built-in Phono RIAA Equalizer: Since the DP-29F includes a built-in phono RIAA equalizer, you can connect the unit to an amplifier or receiver that does not have a phono preamp input without the use of an adapter. If your receiver does have a phono input, and you'd prefer to use it, a small switch beneath the platter disengages the built-in phono equalizer.
33-1/3 and 45 RPM Compatible: The turntable will play at 33-1/3 and 45 rpm speeds. An adapter is included for playing 45 rpm records.
MM Cartridge Included: The DP-29F comes with a fixed mount MM (moving magnet) cartridge so you may enjoy your record collection as soon as you connect the DP-29F to your home stereo system. After approximately 400 hours of playback, Denon recommends the stylus be replaced with the DSN-82 stylus.
Output: The turntable has a hardwired output cable with left and right male RCA plugs. These can plug directly into your receiver or amplifier. There is no need for patch cables.
Q Crutchfield asked: Why did you buy this?
5 questions already asked