About the Accele RVC1150T
A camera that looks like it came with your car
A camera that looks like it came with your car
Accele's RVC1150T rear-view camera can help you back in or out of parking spaces, day or night. This tiny, metal-cased camera mounts "OEM-style" — once you drill a mounting hole and snap it into position, it'll look like it came with your car from the factory. The sensitive 0.2 lux camera picks up clear images, even in low-light conditions. Accele includes the hole saw drill bit, along with a 16-foot RCA video cable that connects to your video screen up front.
Plenty of viewing options
You can mount the RVC1150T in a license plate recess and get a wide-angle view of what's behind your vehicle. You can configure the RVC1150T to show guide lines in the rear-view display, so you can better judge distances while backing into a parking space. Or, you can mount this versatile camera high on a roof line or tailgate handle pointing straight down, to see what's directly behind your vehicle's rear bumper and wheels, so you won't run over anything. You pick the viewing mode for your application by re-configuring a wire in the camera harness.
Note: A rear-view camera provides an additional view when reversing your vehicle. It is intended to be used in conjuction with your rear- and side-view mirrors to give a fuller picture of what's behind you. It is not intended as a replacement for your mirrors.
- rear-view flush-mount camera
- water-resistant, black cast-metal case
- compatible with any radio with an RCA video input (most aftermarket models, only a few factory)
- can be configured as rearward or downward facing
- distance guide lines can be displayed in rearward facing mode
- 23.5 mm hole saw drill bit included
- 0.2 lux CCD-based camera sees clearly, even in low-light conditions
- 165-degree wide viewing angle
- 22' power/video cable included
- dimensions: 1-3/8" x 1-3/8" x 1-3/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # RVC1150T
What's in the box:
- Rearview camera (w/ integrated flush-mount bracket and attached 6' cable)
- 22' Power/video cable
- 23.5mm Hole saw
- Rubber gasket
- Product Manual
- Programming Instructions
More details on the Accele RVC1150T
Features & specs
|Features and Specs|
|Lux Rating||0.2 Lux (min)|
|Horizontal Viewing Angle||165 deg|
|Vertical Viewing Angle||N/A|
|Plug type||Composite video|
Multi-Purpose Camera: The Accele RVC1150T can be configured as a rear-view or downward-view camera. It provides you with a clear wide-angle view of the rear or tow-hitch of your vehicle. This multi-purpose camera features a IP67 waterproof housing.
Note: Image is always reversed.
Composite Video Connector: The Accele RVC1150T multi-purpose camera features a standard composite video output (RCA plug) which makes it compatible with virtually any mobile video monitor featuring a rear view camera input.
Wide Viewing Angle/Low Lux: The RVC1150T's multi-purpose camera offers a 165° vertical and horizontal viewing angle providing an excellent field of vision behind you in your vehicle. The multi-purpose camera provides minimum illumination of 0.2 lux.
Parking Assistance: The camera features a three-color grid to assist backing into a parking space. The grid features green, yellow, and red lines to help you determine how close you are to an obstacle. The camera does not have a proximity sensor or audible warning system.
Note: The parking assistance lines are turned off by default. To turn on the parking assistance lines, you must cut the Green wire loop within the camera's attached cable. The included instructions state this wire loop is Blue, but it is not - it is Green.
Mounting Options: The RVC1150T's integrated mounting bracket allows you to flush-mount this multi-purpose camera to your vehicle. Once the camera is mounted, it is not adjustable. The camera can be mounted to the underside of your vehicle's rear bumper or other horizontal surface for a rear view. The camera will need to be mounted with the lens facing downward on the rear of your vehicle to keep an eye your tow-hitch. A 23.5mm hole saw is included to drill out a hole for the integrated mounting bracket.
Note: A White wire loop within the camera's attached cable switches the image from "right side up" to "upside down", depending on how you have mounted the camera. If the camera is mounted from underneath, do not cut the white wire loop. If the camera is mounted on top, cut the white wire loop.
Connections: The multi-purpose camera features an attached 6' power/video cable terminated by a proprietary connector. This cable plugs into the included 22' power/video cable which features a composite video connector and power/ground wires on the other end. The composite video connector plugs into your in-dash head unit's composite video-camera input. The power/ground wires need be connected to your vehicle's 12-volt electrical system.
Q Crutchfield asked: Why did you buy this?
13 questions already asked