Contact us
Close contact box

Infinity Primus PR9610cs

6"x9" component speaker system

Item # 108P9610CS

When the thrill of owning a new (or new-to-you) car wears off, there's one sure-fire way to bring the...

Find what Fits your car

When the thrill of owning a new (or new-to-you) car wears off, there's one sure-fire way to bring the...

Item # 108P9610CS

Ships free

In stock
C$224.99

About the Infinity Primus PR9610cs

Competitively priced components

When the thrill of owning a new (or new-to-you) car wears off, there's one sure-fire way to bring the excitement back to your drive. Install Infinity's Primus PR9610cs 6"x9" component speaker system and say goodbye to the uninspired vocals, muddy cymbals, and flabby bass of your factory sound. Lifelike vocals, crisp cymbals, and well-defined bass await you. What new playlists will you create to put these awesome speakers to the test? 

Competitively priced components

When the thrill of owning a new (or new-to-you) car wears off, there's one sure-fire way to bring the excitement back to your drive. Install Infinity's Primus PR9610cs 6"x9" component speaker system and say goodbye to the uninspired vocals, muddy cymbals, and flabby bass of your factory sound. Lifelike vocals, crisp cymbals, and well-defined bass await you. What new playlists will you create to put these awesome speakers to the test? 

Edge-driven tweeter design

Infinity employs an edge-driven design in their soft dome tweeters for a smoother, more open response and minimal distortion at high volume. Prepare for a more clearly defined soundstage as the details in your music come alive. 

The included external crossovers are tuned to Infinity's exceptional standards so that you're treated to this system's best possible sound.

Famous Plus One+ technology

This Primus polypropylene woofer delivers solid, punchy bass, thanks to Infinity's proprietary Plus One+ woofer design. Infinity extends the cone right up to the edge of the basket, giving you lots of surface area — and a bigger cone means more bass when your music needs it.

Make the most of your power

Infinity's special "true 4-ohm architecture" uses a low-impedance voice coil to safely draw extra power out of your factory radio, aftermarket stereo, or an external amplifier, so you'll get a stronger clearer sound. Grilles are included.

READ LESS

Product highlights:

  • component speaker system includes 2 woofers, 2 tweeters, and 2 external crossovers
  • 6"x9" Plus One+ polypropylene woofer cone with hi-roll rubber surround
  • edge-driven, textile dome tweeter
  • 2.7-ohm impedance for extra power (compatible with virtually all factory or aftermarket car stereos)
  • handles up to 100 watts RMS (300 watts peak power)
  • frequency response: 46-20,000 Hz
  • sensitivity: 89 dB at 2.83 volts
  • woofer top-mount depth: 3-1/8"
  • grilles included
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # PR9610CS

What's in the box:

  • 2 Woofers
  • 2 Tweeters (each has attached 6" speaker leads with male quick-slides)
  • 2 Woofer grilles
  • 2 Grille frames
  • 2 Bottom mount woofer brackets
  • 2 Crossovers
  • 2 Flush-mount cups
  • 2 Threaded flush-mount adapters
  • 2 Plastic locking nuts
  • 2 Surface-mount cups
  • 2 Starfish tweeter mounts
  • Four 1-3/8" Screws
  • Eight 1-1/8" Screws
  • Six 5/8" Flat head screws
  • 2 Washers
  • 2 Nuts
  • 8 Speed clips
  • 2 Adhesive backed foam gaskets
  • Template on box
  • Installation manual

Customer reviews

Loading reviews...

Infinity Primus PR9610cs reviews

Average review:

18 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Infinity Primus PR9610cs

Pat M.

Features & specs

General
Speaker Size 6X9
Design 2-way
Tweeter Design Edge-Driven Dome
Impedance (Ohms) 2.7
Tweeter Composition Textile
Woofer Composition Polypropylene
Woofer Surround Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) N/A
Sensitivity at 2.83 volts 89
Frequency Response 46 - 20k Hz
Minimum RMS Wattage ---
Maximum RMS Wattage 100
Peak Power Handling (Watts) 300
Top-mount Depth (Inches) 3 1/16
Bottom-mount Depth (Inches) 3 11/16
Cutout Diameter or Length (inches) 0

Product Research

Features

Plus One Woofer Cones: The Plus One speaker cones offer more surface area than other speakers that fit in the same size opening. This is accomplished by using a new basket design and hi-roll surround. The result is greater bass output and an increase in efficiency.

Tweeter Mounting: The I-Mount tweeter mounting system and Starfish mounting brackets give you several different ways to mount the tweeters:

  • I-Mount Mounting System: The tweeters can be surface or flush mounted:
    • Surface Mount: Surface mounting the tweeters involves screwing the surface-mount cup to the mounting location, then inserting and locking the tweeter into the cup.
    • Flush Mount: Flush mounting is made easy through the use of the threaded flush-mount housing and plastic locking nut. Once a cutout is made, the tweeter is installed in the flush-mount adapter, then into the flush mount housing and inserted into the hole. The large plastic locking nut is threaded onto the adapter (from behind the mounting surface) to hold the complete assembly securely in place. When flush mounted, the tweeters may be angled for optimum response and imaging.
  • Starfish Mounting Brackets: The Starfish mounting brackets allow the tweeters to be installed in factory locations behind the grilles:
    • Bottom Mount: Once the Starfish bracket is trimmed, it is secured to the underside of the grille panel. The tweeter must be inserted into the bracket and locked into place before the bracket is mounted.
    • Surface Mount: Once the Starfish bracket is trimmed, it is screwed to the top of the mounting surface behind the grille panel. Then, the tweeter is inserted into the bracket and locked into place.
    • Flush Mount: There are two sets of tabs to flush mount the tweeter in the Starfish bracket, yielding different mounting dimensions. The upper tabs mount the tweeter completely below the opening and are glued in place. The lower mounting tabs are screwed in place and result in a mounting height just over 1/3 inch. Once the bracket is mounted, the tweeter is inserted into the bracket and locked into place.

Mounting Dimensions:

  I-Mount Surface Mount I-Mount Flush Mount Starfish Bottom Mount Starfish Surface Mount Starfish Flush Mount Starfish Flush Mount (below mounting surface)
Mounting Height 0.860" 0.632" 0.0" 0.843" 0.366" 0.0"
Depth 0.5" (screw depth) 0.804" 1.011" 0.5" (screw depth) 0.477" 0.94"
Frame Diameter 1.483" 1.843" 3.012" 2.444" 2.316" 3.012"
Cutout Diameter N/A 1.582" N/A N/A 1.508" 2.6"

Crossovers: The crossovers' inputs and outputs are screw terminals; they will accommodate bare wire or spade connectors up to 0.315" wide. There are two mounting holes in each crossover.

Crossover Dimensions:

  • Width: 2-1/8"
  • Height: 1"
  • Depth: 2-5/16"

Impedance: The Primus Series speakers feature 2.7Ω voice coils to compensate for the high in-line resistance of small gauge factory wiring and extract every watt from the factory receiver, increasing overall system output and efficiency (relative to 4-ohm speakers). The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers capable of powering a lower impedance load.

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
New year new products and reviews [ Kameron  Jan 27, 2019 ]
A
This particular set has the correct impedance to replace my factory BMW rear deck speakers. [ Juan  Nov 28, 2018 ]
A
price and described quality attributes [ Tim  Oct 18, 2018 ]
A
I needed replacement speakers and the "setup" from the Brand of vehicle has made it confusing and not as simple as just ordering speakers and plugging them in so I asked an adviser who assisted me in making my decision. [ Mark  Aug 21, 2018 ]
A
Cool [ Josh  Mar 26, 2018 ]
A
Seemed to fit the bill of for my current project. I will review once installed. [ SHAWN  Mar 20, 2018 ]
A
Upgrade factory components. [ Mark  Feb 20, 2018 ]
A
quality replacement for factory speakers that are low quality [ Robert  Jan 14, 2018 ]
A
Fits my '05 Altima SE-R rear deck [ JCT  Dec 30, 2017 ]
SHOW MORESHOW LESS

3 questions already asked

Q
How do you compare the db when it comes to rateing ?? s?
[ Tankey  Oct 19, 2018 ]
1 answer
A
Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget.
[ Krissy  Oct 22, 2018 ]  Staff
Q
Where do you mount crossovers when all speakers are located in the door?
[ Derry  Dec 05, 2017 ]
1 answer
A
Typically the crossovers will be mounted in the door panels upon installation. For more specific details on that, please contact an Advisor directly by phone (888.955.6000) or online chat. They can go over any questions and/or concerns about the installation with you there. Thanks! :)
[ Larry  Dec 09, 2017 ]  Staff

Loading articles...

TOP