About the Kenwood Excelon P-XW804B
Excel with Excelon
Excel with Excelon
Kenwood's Excelon P-XW804B ported sub enclosure brings you the rich, full bass you love in a solid, durable enclosure that tucks neatly behind your seat or in your trunk. The 8" Excelon subwoofer features a redesigned, oversized cone with ribbed reinforcement that maintains its shape and and maximizes bass response. Its redesigned yoke and large magnet strengthen the sub's magnetic circuit, giving you even better reproduction of low frequencies.
300 watts of bass power
The P-XW804B ported loaded enclosure is less than 6” deep, so it'll fit in some seriously tight spots. Its 4-ohm sub handles up to 300 watts RMS, so send it plenty of power — it'll deliver the powerful bass that makes your music come alive.
- ported enclosure with one 8" oversized Excelon subwoofer
- ribbed polypropylene cone with rubber surround
- 4-ohm impedance
- power handling: 300 watts RMS (900 watts peak power)
- frequency response: 41-300 Hz
- sensitivity: 80 dB
- dimensions: 17-11/16"W x 11-13/16"H x 5-7/8"D
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # P-XW804B
What's in the box:
- Vented subwoofer enclosure loaded with one 8" subwoofer
- 2 L brackets
- 8 Self-tapping screws (M5 x 25mm)
- Warranty card
More details on the Kenwood Excelon P-XW804B
Features & specs
|Woofer Size (inches)||8|
|Speakers Per Box||1|
|Pieces in System||1|
|Second Depth (inches)||N/A|
|Connector Type||Spring Posts|
|Frequency Response||41-300 Hz|
|Power Range (Watts RMS)||300|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
Overview: The Kenwood Excelon P-XW804B is a loaded subwoofer enclosure with an 8" XR-series oversized driver. This compact, ported enclosure will fit into many vehicles, even where space is at a premium. Included with the subwoofer are two metal L-brackets and hardware for mounting it into your vehicle.
Driver: The P-XW804B contains a single 4-ohm XR-W804 8" driver. The speaker has an oversized cone to give you better low frequency output. Ribs on the underside of the cone add strength to keep it from flexing during excursion, minimizing distortion. The motor structure features a strong magnetic circuit and a reinforced yoke for extra durability.
Enclosure: The subwoofer enclosure is made of medium-density fiberboard (MDF) covered in black carpet. The white and red Kenwood Excelon logo is stitched into the top panel. It has a rectangular shape with a recessed front baffle which allows you to mount the sub vertically or horizontally, either up-firing or down-firing. The enclosure has a 4" x 1" slot port on the left side. The round terminal cup is also located on the left side with spring post terminals that will accept bare wire, pin connectors, and single or dual banana plugs.
- Frequency Response: 41Hz to 300Hz
- Impedance: 4Ω
- Power Handling: 300 watts RMS; 900 watts Peak
- Sensitivity: 80dB (1W/1m)
- Dimensions: Width 18", Height 12", Depth 6"
- Weight: 18.52 pounds
1 question already asked