About the Kenwood KFC-W3013PS
Kenwood puts decades of experience into building their Performance Series subs, so you can have powerful, reliable bass in your vehicle. Check out the KFC-W3013PS 12" sub — you get a heavy-duty polypropylene cone reinforced by a tough rubber surround that accommodates the extra-long cone excursion. And this sub handles up to 400 watts RMS, so you can rock out out with plenty of thunder.
The Diamond Array Pattern reinforces the cone so that it won't warp during heavy bass production. A dual ventilation system pulls heated air out of the motor structure through the back and the sides of the sub, so the inner works stay cooler during those long, loud jams. Put this Kenwood in a suitable enclosure, power it with a nice amp, and get ready to party.
Package deal: Like this sub? You can save big bucks with this Kenwood dual 12" bass package.
- 12" 4-ohm subwoofer
- textured polypropylene cone with rubber surround
- power range: 50-400 watts RMS
- peak power handling: 1,200 watts
- frequency response: 34-300 Hz
- sensitivity: 85 dB
- top-mount depth: 6-1/16"
- sealed box volume: 0.75-1.75 cubic feet
- ported box volume: 1.5-2.5 cubic feet
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # KFC-W3013PS
What's in the box:
- One 12" SVC Woofer
- Plastic trim ring
- Eight 1-1/4" Self-tapping screws
- Adhesive backed foam gasket
- Cardboard template
- Instruction manual (English/ French/ Spanish/ Portuguese)
- Warranty information
More details on the Kenwood KFC-W3013PS
Features & specs
|Ideal Sealed Box Volume (cubic feet)||1.25|
|Ideal Ported Box Volume (cubic feet)||2|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||No|
85 dB at 1 watt |
|Frequency Response||34 - 300 Hz|
|Max RMS Power Handling||400|
|Peak Power Handling (Watts)||1200|
|Top Mount Depth (inches)||6 1/16|
|Bottom Mount Depth (inches)||6 3/4|
|Cutout Diameter or Length (inches)||11|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Cone: The KFC-W3013PS uses a polypropylene cone and rubber surround for added durability.
Heat Transfer System: A dual ventilation system design helps keep the motor structure cool, improving power handling and longevity.
Long Stroke Design: The pole piece has been extended to provide a more linear magnetic field for woofer operation. This lowers distortion and provides the woofer with better low frequency response.
Double Stacked Magnet: The stacked magnet assembly is used to create a powerful linear motor with increased excursion capability for superior bass output.
Spring Terminals: The spring post terminals on one side of the woofer connect to your amplifier's wiring. The posts will accept pin connectors, single banana plugs, or bare wire up to 10 gauge.
Sealed Box: Kenwood recommends a sealed enclosure with an optimum internal volume of 1.25 cubic feet (from 0.75 to 1.75 cubic feet is acceptable). Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.
Ported Box: Kenwood recommends a ported enclosure with an internal volume of 2.0 cubic foot (from 1.5 to 2.5 cubic feet is acceptable) using an 12-3/4" x 1-1/2" x 21-1/2" slot port. Ported (or vented) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of very low frequency output.
2 questions already asked