Contact us
Close contact box

Metra 70-1771 Receiver Wiring Harness

Connect a new car stereo in select 1998-2011 Ford, Lincoln, Mercury, and Mazda vehicles

Item # 120701771

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical...

Find what Fits your car

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical...

Top Seller

Item # 120701771

In stock
C$13.99

About the Metra 70-1771 Receiver Wiring Harness

Metra 70-1771 Receiver Wiring Harness

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.

Metra 70-1771 Receiver Wiring Harness

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.

First, attach the color-coded wires on your Crutchfield-supplied harness to the wires from your new stereo. If you're not using a soldering iron, we recommend that you purchase some wire connectors to secure the connections. Check out our handy article on three ways to connect the wiring harness here.

Now, once this harness is connected to your new stereo, you'll be able to plug right into your car's factory radio connector. This harness saves installation time since you won't have to cut factory wires individually, and this also enables you to re-install the factory radio if needed. A detailed instruction sheet comes with the harness. Warranty: 60 days.

Please read this important note: This harness may not contain provisions for every wire needed to complete your installation, and it will not accommodate special navigation, video, or factory steering wheel control connections. You will need a special adapter if you want your factory steering wheel audio controls to work with your new stereo.

Connections:

  • 12V constant power
  • 12V switched power
  • chassis ground
  • signal ground — connects to same receiver wire as the chassis ground
  • illumination
  • dimmer
  • left front speaker +/-
  • right front speaker +/-
  • left rear speaker +/-
  • right rear speaker +/-
READ LESS

What's in the box:

MFR #70-1771

Customer reviews

Loading reviews...

Metra 70-1771 Receiver Wiring Harness reviews

Average review:

709 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Metra 70-1771 Receiver Wiring Harness

Stacey B.

Product Research

Features

Metra Wiring Harness: This Metra wiring harness prevents you from having to cut your vehicle's factory radio plug when replacing your factory radio with an aftermarket head unit. Simply solder or crimp the Metra wiring harness to your aftermarket head unit's harness (solder & crimps not included), plug the aftermarket head unit's plug into the rear chassis of the aftermarket head unit, and plug the Metra wiring harness into your vehicle's factory radio plug.

Note: Installation tools, hardware, & accessories are not included & sold separately. Please see the Accessories tab for recommendations & availability.

Wiring Notes: If the Metra wiring harness is not equipped with a ground wire, you will need to ground the aftermarket head unit's ground wire to the metal chassis of your vehicle. Some vehicle's may require you to bypass the vehicle's factory amplifier (in another location from factory radio) or hardwire certain connections. If your vehicle is equipped with factory steering wheel controls, an additional adapter is required & sold separately.

Wire Code Chart:

Wire Color Function
Red +12 Volt Accessory
Yellow +12 Volt Constant
Black Chassis Ground
Empty (none)
Orange Illumination
Empty (none)
White Left Front Speaker +
White/Black Left Front Speaker -
Gray Right Front Speaker +
Gray/Black Right Front Speaker -
Green Left Rear Speaker +
Green/Black Left Rear Speaker -
Violet Right Rear Speaker +
Violet/Black Right Rear Speaker -

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
This item came with the product [ STEVEN  Nov 03, 2019 ]
A
to replace radio in unit [ michael  Oct 16, 2019 ]
A
To help with the ease of instal, even though my previous wires were cut and mangled [ ARNIE  Oct 13, 2019 ]
A
To make installation wiring easier [ Rian  Sep 22, 2019 ]
A
Part of package for radio install. [ Glenn  Sep 20, 2019 ]
A
required for hooking up new radio [ Scott  Aug 27, 2019 ]
A
recommended for hassle free install. [ BRANCH PORTAGE  Aug 26, 2019 ]
A
Cause it came with the unit I ordered. [ William  Aug 20, 2019 ]
A
Easy hook up [ Dennis  Aug 20, 2019 ]
A
It will help with the installation and is included for free. [ Joshua  Aug 18, 2019 ]
A
Because I want to do the install fast [ Mccwho  Aug 12, 2019 ]
A
makes the change easier [ Timothy  Jul 25, 2019 ]
A
A new radio deserves fresh new connections, didn't have to buy one because Crutchfield included it for free. [ William  Jul 19, 2019 ]
A
Everything is more easy [ Luis A Lopez  Jul 14, 2019 ]
A
I have pioneer DEH-S5100BT that I want to install in my 1999 F150. [ ALEX T  Jul 07, 2019 ]
A
Plug and play. I don't have time for anything else. [ Richard  Jul 05, 2019 ]
A
fit [ M  Jul 04, 2019 ]
A
Have the same one in my Ford Explorer, LOVE IT! [ Robert A.  Jun 15, 2019 ]
A
I have changed out these radios before and having the ready to use harness makes it so easy. [ Kelly  Jun 12, 2019 ]
A
Included with order. [ Frank  Jun 11, 2019 ]
A
Never want to cut into factory wiring [ Napoleon  Jun 01, 2019 ]
A
just installed a unit in other car simple [ GEORGE  May 27, 2019 ]
A
This is the wiring harness that came free of charge with my purchase. [ Michael A.  May 25, 2019 ]
A
Changing vehicles so this will be necessary. [ J W  Apr 24, 2019 ]
A
ease of install [ Jeff  Apr 23, 2019 ]
A
Golden rule: Right tools/or parts for the right job makes life much easier. [ Daniel  Apr 08, 2019 ]
A
Easy hook up [ Melvin  Apr 04, 2019 ]
A
I chose this because it is the right adapter to add an aftermarket stereo to my 2003 F250 Super Duty stock wiring harness, and because I have used Crutchfield for over 20 years for my stereo upgrade needs. [ Joseph  Mar 23, 2019 ]
A
Don't want oem cables cut [ william frederi  Mar 23, 2019 ]
A
Saves alot of work and time making wiring connections [ Bobby  Mar 14, 2019 ]
A
it was recommended for install.... [ Whitney  Mar 14, 2019 ]
A
Work smarter not harder and it limits the error margin [ Jose  Mar 09, 2019 ]
A
Needed for every aftermarket instillation [ Alonzo  Mar 08, 2019 ]
A
Saves time when connecting factory wires to my new stereo. [ Pete  Mar 08, 2019 ]
A
So i can hook it up to my car [ Elazar Ben  Mar 08, 2019 ]
A
Helps with install. [ Lawrence  Mar 07, 2019 ]
A
Easy Connection to the factory harness [ Jack  Feb 25, 2019 ]
A
recommended by Crutchfield to make an easier installation [ VILLA`S RADIO`S  Feb 18, 2019 ]
A
Offered by crutchfield for free! Makes install a breeze. [ A  Feb 18, 2019 ]
A
makes install much easier [ ronnie  Feb 13, 2019 ]
A
Easy hook up,to factory wiring [ Robert  Feb 12, 2019 ]
A
Price was a big factor. I have purchased other Crutchfield products in the past and have always had good results. This was for my son's 2001 ford ranger. [ Dallas  Feb 04, 2019 ]
A
You suggested it [ ashley  Feb 02, 2019 ]
A
came with kit [ Robert  Jan 28, 2019 ]
A
Always, always, always purchase an adapter for your factory harness. Nothing is worse than going to install a new head unit to find that a previous owner butchered the factory wiring by doing it themselves. These save so many headaches that there is no possible reason to do an install without one. [ Mark  Jan 11, 2019 ]
A
Ease of install [ D  Jan 09, 2019 ]
A
Crutchfield said I needed it to install my radio [ Max  Jan 02, 2019 ]
A
It came in a package deal with all the stuff I need to install my stereo included in the price of the stereo. What's not to like? [ Jason  Dec 30, 2018 ]
A
Suggested by Crutchfield representative [ Joe B  Dec 27, 2018 ]
A
recommended by crutchfield [ Tony  Dec 25, 2018 ]
A
installing a new radio and need this, it fits my truck. [ Phillip  Dec 22, 2018 ]
A
Always the right fit. [ RANDY  Dec 22, 2018 ]
A
Makes wiring the radio so much easier [ David  Dec 21, 2018 ]
A
free [ Anthony  Dec 19, 2018 ]
A
Need connecting to factory harness [ DEAN  Dec 19, 2018 ]
A
it was recommended [ STEPHEN  Dec 10, 2018 ]
A
These bad boys keep your factory adapter intact! I have direct wired one stereo unit before and it was not fun at all. These adapters are lifesavers since you don't have to crimp the wires in such a tight space. [ Joseph  Dec 06, 2018 ]
A
Standard for any radio Installation I do. [ Eric  Dec 05, 2018 ]
A
It was free [ Brian  Dec 03, 2018 ]
A
It will help with purchase [ Donna  Dec 02, 2018 ]
A
Advisor suggestion [ Peter  Nov 28, 2018 ]
A
Free [ Anthony  Nov 28, 2018 ]
A
Necessary for install. [ Dauntae  Nov 28, 2018 ]
A
included with installation accessories package. simplifies installation greatly [ Ronald  Nov 28, 2018 ]
A
An absolute MUST have for a professional installation! [ Wallace  Nov 27, 2018 ]
A
Recommendation of customer service rep [ L  Nov 26, 2018 ]
A
It's needed to put the head unit I purchased into my vehicle. [ James  Nov 26, 2018 ]
A
free easy install [ RYAN  Nov 26, 2018 ]
A
easier installation [ Jason  Nov 26, 2018 ]
A
It was free [ Val  Nov 24, 2018 ]
A
Makes installation of the radio to the factory wiring harness very easy [ Michelle  Nov 23, 2018 ]
A
need for ford wiring [ FRED  Nov 22, 2018 ]
A
Need it to wire in new stereo [ Matt  Nov 21, 2018 ]
A
Oem [ Allen  Nov 19, 2018 ]
A
need to hook to stock wiring harness [ Susan  Nov 18, 2018 ]
A
I chose this harness so I could install my new stereo receiver. [ Ryan  Nov 16, 2018 ]
A
Need for a clean transition [ Steve  Nov 09, 2018 ]
A
Idk [ Dallas  Nov 06, 2018 ]
A
They were recommended by Crutchfield. [ Frank A.  Oct 27, 2018 ]
A
Sure beats trying to cobble something together by myself! I've always had good experiences with Metra stuff. [ Doc  Oct 27, 2018 ]
A
Free with purchase [ Valley R.  Oct 27, 2018 ]
A
Always nice to have a wiring harness added for free so you don't have to go out and purchase one from somewhere. [ B  Oct 27, 2018 ]
A
Makes an easy installation, saves time. [ Fred  Oct 16, 2018 ]
A
Came with unit [ M  Oct 16, 2018 ]
A
Recommended, also i do not believe in cutting factory wiring harnesses [ Daniel  Oct 12, 2018 ]
A
Also free [ David  Oct 09, 2018 ]
A
came with radio [ ronald  Oct 08, 2018 ]
A
It was recommended with my navigation system I chose [ Karen  Oct 08, 2018 ]
A
free [ adam  Oct 07, 2018 ]
A
simple set up for installation [ Woodburn  Oct 02, 2018 ]
A
Crutchfield recommended [ Keith  Sep 30, 2018 ]
A
Was cheaper on walmart,com but the price came with the instructions so i don't mess up the new radio install, and will be use full to me later for DIY speaker install as well. [ jordan  Sep 28, 2018 ]
A
tech support answered my questions [ Eugene  Sep 23, 2018 ]
A
Needed to install [ john  Sep 21, 2018 ]
A
Required for installation, and it was part of the package. [ Christopher  Sep 21, 2018 ]
A
I love crutchfield for the easy install. It comes with everything you need. [ Elioz  Sep 20, 2018 ]
A
To prevent cut the original wiring harness [ Omar  Sep 18, 2018 ]
A
good reviews. ease of plug and play [ Jon  Sep 13, 2018 ]
A
To make installation easier. [ Lisa  Sep 10, 2018 ]
A
Faster [ jer3rd  Sep 08, 2018 ]
A
To Prevent having to Cut Factory Harness. You want to avoid this at all costs!! [ Chris  Sep 08, 2018 ]
A
Included in my order, makes installation a breeeeeze [ Ryan  Sep 03, 2018 ]
A
included [ scott  Aug 31, 2018 ]
A
I needed that harness and its easier for the experts to do it! [ Mike  Aug 30, 2018 ]
A
Allows me to fit my new head unit into my new car [ Noah  Aug 28, 2018 ]
A
need it to plug into the existing radio harness [ Jerren  Aug 28, 2018 ]
A
To provide a clean and easy install. Also so that I could wire my head unit from inside my home. [ Bryce  Aug 25, 2018 ]
A
For my car. [ Stephen  Aug 24, 2018 ]
A
Recomended [ Robert  Aug 23, 2018 ]
A
Nessasary for ease of installation! [ TROY  Aug 22, 2018 ]
A
Suggested [ RICHARD  Aug 21, 2018 ]
A
Makes for a quick install [ jason  Aug 21, 2018 ]
A
Makes connections a snap, pun intended! [ Jack  Aug 20, 2018 ]
A
factory harness [ Kenneth  Aug 20, 2018 ]
A
I have skipped this in the past and I need to get this done quickly. [ WILLIAM H  Aug 18, 2018 ]
A
Why would you not get this.... [ george  Aug 16, 2018 ]
A
With this harness you don't have to cut any factory wiring. you match up and connect this harness to the receiver harness so then instillation really easy, plug and play. [ Nicholas  Aug 14, 2018 ]
A
Crutchfield customer support [ Paul  Aug 11, 2018 ]
A
Necessity [ William  Aug 10, 2018 ]
A
supplied with order at no charge [ Larry  Aug 08, 2018 ]
A
Best way to install an aftermarket stereo [ Anthony  Aug 07, 2018 ]
A
needed to complete the installation in my truck [ Mario  Aug 04, 2018 ]
A
I already bought a Kenwood DDX575BT for my 2002 Passat from you. Sense then I bought a 2000 Ford F250 and i want to move the stereo from my car to the truck. [ Scott  Jul 31, 2018 ]
A
I don't buy these types of items often, but when I do, I trust Crutchfield and have always have a good experience when dealing with them [ Jeff  Jul 30, 2018 ]
A
Based on recommendation from Harley [ Edward  Jul 28, 2018 ]
A
this helps so you don't have to cut wires, just plug and play [ Richard  Jul 22, 2018 ]
A
only few more bucks but it save a lot of your time Let pro taking care of You will enjoy more [ lan  Jul 21, 2018 ]
A
need it [ WILLIAM  Jul 18, 2018 ]
A
Easy installation [ Robert  Jul 16, 2018 ]
A
to connect the factory radio harness to the aftermarket radio [ Doug  Jul 10, 2018 ]
A
Purchased item to transfer a previously purchased system from my wrecked Suzuki into the Escape. [ Rodney  Jul 09, 2018 ]
A
It is made to work with my purchase [ PETE  Jul 03, 2018 ]
A
Came bundled with the stereo I chose. [ Brett  Jul 03, 2018 ]
A
Makes installation a breeze [ William  Jul 03, 2018 ]
A
suggested by crutchfield [ W  Jul 03, 2018 ]
A
convenient [ Paul  Jul 02, 2018 ]
A
need [ michael  Jul 02, 2018 ]
A
easy plug and play [ richard  Jun 28, 2018 ]
A
Using this products illuminates the need to cut the factory wiring of your vehicle; making the install drastically easier. [ Franklin  Jun 28, 2018 ]
A
harness adapter is needed to connect to factory harness without cutting factory wires. [ Angel  Jun 26, 2018 ]
A
help ease in installation [ David  Jun 25, 2018 ]
A
ease of use [ Bryan  Jun 23, 2018 ]
A
Ease of installation [ Jonathan  Jun 22, 2018 ]
A
F-R-E-E!!!!! [ james  Jun 22, 2018 ]
A
to make install without hacking factory wiring [ Jerry  Jun 20, 2018 ]
A
aftermarket radio install [ Jordan  Jun 19, 2018 ]
A
To connect to the existing vehicle harness without having to cut any wires. [ Robert W.  Jun 08, 2018 ]
A
Free [ Cody  Jun 08, 2018 ]
A
yes [ Coleman  Jun 05, 2018 ]
A
Makes the new head plug and play! [ Kevin Thomas  May 31, 2018 ]
A
Cuts the install time in half [ Josh  May 30, 2018 ]
A
needed for installation. [ Wayne  May 23, 2018 ]
A
Free - came with order [ Krizhalyn  May 22, 2018 ]
A
Recommended [ Robert  May 16, 2018 ]
A
cause it was free [ N  May 12, 2018 ]
A
Great help [ Julie  May 12, 2018 ]
A
While I could have done the wiring myself, it seemed far more convenient to purchase the wiring harness and save the hassle. [ Stuart  May 05, 2018 ]
A
free [ Jonathan  May 04, 2018 ]
A
would make my installing easy [ Harry  Apr 30, 2018 ]
A
Easy instalation [ Dave  Apr 28, 2018 ]
A
So I wont have to solder. [ Jacob  Apr 26, 2018 ]
A
needed to wire new radio. [ R  Apr 25, 2018 ]
A
It came free n recommended [ Napoleon  Apr 25, 2018 ]
A
came with radio [ michael  Apr 24, 2018 ]
A
ease of installation [ Bryan  Apr 24, 2018 ]
A
It was recommended by Crutchfield [ John  Apr 21, 2018 ]
A
Because it was recommended by Cruthfield [ Derrick  Apr 21, 2018 ]
A
With out this you have to cut the plug off the old radio, this plug makes for a easier hook up. [ Jody  Apr 16, 2018 ]
A
To make installation easier and to ensure that every thing is hooked up properly [ Dave  Apr 14, 2018 ]
A
way easier than splicing wires. [ Donald  Apr 10, 2018 ]
A
I needed this wiring harness to plug into the factory harness [ Russell  Apr 09, 2018 ]
A
Professional installed abapter is best way to go. Done this on three previous installs and would not do without [ PAUL B  Apr 03, 2018 ]
A
This item was included in the install kit [ JAMES D  Mar 31, 2018 ]
A
cause it was free with stereo purchase [ David  Mar 28, 2018 ]
A
Makes installation a breeze [ JAMES  Mar 21, 2018 ]
A
Needed it for the stereo [ Mark  Mar 21, 2018 ]
A
Used these harnesses before to install after market radios, Works great. [ Joseph  Mar 18, 2018 ]
A
To make the install easier. [ David  Mar 16, 2018 ]
A
It is good to have it. [ Samuel  Mar 15, 2018 ]
A
Recommendation for install. [ Sean  Mar 11, 2018 ]
A
I worked with Crutchfield before and the harness makes wiring the new radio to your car system cleaner and easier. [ Glenn  Mar 11, 2018 ]
A
included in kit to keep car factory [ Douglas  Mar 08, 2018 ]
A
Because it makes it so much easier and cheaper for me. I don't know much about wires but I do put my stereo in myself so it just generally makes it easier. [ Krystal  Mar 06, 2018 ]
A
it was free [ Jeremiah  Mar 06, 2018 ]
A
Come on! It's free! [ ROBERT S  Feb 28, 2018 ]
A
Didn't want to deal with cutting and splicing myself and I have limited time to work on things as is... [ Marvin  Feb 28, 2018 ]
A
Because it makes this installation easier [ DAVID  Feb 26, 2018 ]
A
Need this to hook your stereo up! [ Graeden  Feb 22, 2018 ]
A
needed [ Ryan  Feb 21, 2018 ]
A
Fits [ Jarrell  Feb 21, 2018 ]
A
Ease of installation [ Jack  Feb 21, 2018 ]
A
it was free [ William  Feb 10, 2018 ]
A
I had purchased a radio for my expedition but sold the expedition and purchased a Ranger. [ Sathya  Feb 09, 2018 ]
A
Was identified as the required and correct part for my car by the Crutchfield vehicle fitment system [ Steven  Feb 09, 2018 ]
A
make life simple [ Sam  Feb 02, 2018 ]
A
perfect fit [ Jeff  Feb 01, 2018 ]
A
to put my Jensen radio in ford ecoline van [ Walter  Jan 26, 2018 ]
A
These harnesses make it very easy to do a DIY install of aftermarket radios into the factory wiring harness. Metra has worked well over the years and I highly recommended it. [ Paul  Jan 24, 2018 ]
A
To connect my Sanyo head unit to my 2006 Ford Escape OEM harness. [ K  Jan 24, 2018 ]
A
it was reccomended [ Douglas  Jan 23, 2018 ]
A
make life easy [ MICHAEL T  Jan 21, 2018 ]
A
I have a 2003 mustang base coupe and is the original stereo installed. [ ANDREW G.  Jan 20, 2018 ]
A
to make installation easier. [ Joseph  Jan 20, 2018 ]
A
Definitely makes the installation much easier. [ Russell  Jan 15, 2018 ]
A
to make install go smother [ edward  Jan 11, 2018 ]
A
A much cleaner install with this harness. [ MARK  Jan 09, 2018 ]
A
to connect aftermaket radio to the factory harness with cuting the factory wiring [ Stan  Jan 08, 2018 ]
A
if it works the way its designed, it should make installation a lot faster [ Richard Dennis  Jan 06, 2018 ]
A
Needed for installation [ A  Jan 01, 2018 ]
A
Yes [ Brennan  Dec 30, 2017 ]
A
Makes installation much easier [ Micheal  Dec 29, 2017 ]
A
Needed for install! [ Hope  Dec 28, 2017 ]
A
It is a necessary part. [ Debra Jean  Dec 28, 2017 ]
A
Can reinstall factory radio any time. Easy installation [ Jessie  Dec 27, 2017 ]
A
needed to install [ Lois  Dec 26, 2017 ]
A
Allows you to reinstall the oem radio [ Anthony  Dec 18, 2017 ]
A
To simplify the wiring from the vehicle to the reciever [ Joshua  Dec 18, 2017 ]
A
Crutchfield provides install kit for free with stereo purchase and it was needed to install Sony stereo in 2004 Ford Mustang Coupe, makes installing new stereo much easier. [ Kevin  Dec 17, 2017 ]
A
Suggested item. [ Brittany  Dec 17, 2017 ]
A
Needed for install. [ Casey  Dec 08, 2017 ]
A
Adding a new radio to me Mazda B3000 and like the idea af just plug and play not cutting wires... [ Karen Corson  Dec 08, 2017 ]
A
Helps to have all parts available at the same time [ CRIS  Dec 01, 2017 ]
A
Was recommended for use by Crutchfield [ MIKE  Dec 01, 2017 ]
A
Recommended Install Kit [ Charles  Nov 28, 2017 ]
A
Plug and play [ David  Nov 28, 2017 ]
A
it was recommended as part of the install kit [ Dallas  Nov 28, 2017 ]
A
This is the part for my vehicle. [ Cameron de  Nov 27, 2017 ]
A
Have to have it going from this stock head unit to an aftermarket. [ Jared  Nov 27, 2017 ]
A
Need to interface from factory wiring to my new Pioneer [ Robert  Nov 24, 2017 ]
A
to make it easier [ Kevin  Nov 24, 2017 ]
A
Metra makes one of the best harness, very easy to use and understand [ melvin  Nov 23, 2017 ]
A
I've installed several radios using the Crutchfield harness. Once I used the first one I was sold on it. Do yourself a favor and buy it. [ RICHARD  Nov 22, 2017 ]
A
So I could change my stereo [ Marc  Nov 21, 2017 ]
A
Better than cutting the wiring to the vehicle, just in case you need to put the manufacturer radio back in. [ Kenneth  Nov 21, 2017 ]
A
Want to make the connection between the radio and the car wires easy, better contact and a professional look. [ Eduardo  Nov 19, 2017 ]
A
free [ Steven  Nov 18, 2017 ]
A
Needed and free [ Jamie  Nov 18, 2017 ]
A
NEED TO HOOK TO THE OEM HARNESS [ Nimrod  Nov 16, 2017 ]
A
i was gifted a Kenwood DDX794 radio and needed all the aqdditonal partds to complete my installation as I would like. [ Jerry  Nov 15, 2017 ]
A
Recommended by Crutchfield. [ Kendall  Nov 14, 2017 ]
A
Easy installation. [ HsSrvnt  Nov 13, 2017 ]
A
Hopefully this will make swapping out the radio in my friend's 2001 Ranger simple. [ Paul  Nov 12, 2017 ]
A
To install the Sony stereo in my 2002 Ford F-150. [ Barry  Nov 12, 2017 ]
A
The easiest way to install a radio. I won't do it without one. [ Brett  Nov 12, 2017 ]
A
To wire [ Clint H  Nov 04, 2017 ]
A
Ease of installation. [ David  Nov 02, 2017 ]
A
Ease of installation and included free [ David  Nov 02, 2017 ]
A
Ease of installation [ James  Nov 01, 2017 ]
A
I wanted to keep the wiring on my car original and this will allow me to do that. [ Louis  Oct 31, 2017 ]
A
Need to easily install into my truck! [ Brian  Oct 30, 2017 ]
A
Lets face it, you gotta connect the wires somehow and this beats cutting up your factory wiring harness to do it. A must have product. [ Brian  Oct 28, 2017 ]
A
Recomended [ Kevin  Oct 27, 2017 ]
A
Makes for a easy install [ John  Oct 26, 2017 ]
A
Suggestion from Crutchfield [ Christopher  Oct 22, 2017 ]
A
Included FREE with FREE installation kit! [ Surferboy  Oct 22, 2017 ]
A
Was free with radio. [ Keith  Oct 22, 2017 ]
A
comes with install kit [ Paul  Oct 20, 2017 ]
A
Quality part and simplified connection to factory wiring---add in Crutchfield's fast and free shipping, not a downside to be found! :) [ J W  Oct 18, 2017 ]
A
Needed [ John  Oct 17, 2017 ]
A
because it was offered for free. [ Robert  Oct 17, 2017 ]
A
Free from Crutchfield! Any time you can use a wire harness on an install, it beats out splicing directly into factory wiring. Way better than ruining factory harnesses. [ Logan  Oct 17, 2017 ]
A
required and free, thank you! [ SCOTT  Oct 16, 2017 ]
A
install [ Justin  Oct 16, 2017 ]
A
It's easier to use the wiring harness adapter than to direct wire everything. [ Stephen  Oct 10, 2017 ]
A
quicker install. [ walter  Oct 04, 2017 ]
A
This is required to connect your new head unit to your existing vehicle wiring harness. [ Nathan  Oct 02, 2017 ]
A
This looks like it will make for a cleaner install [ A  Oct 01, 2017 ]
A
Because I need it [ Albert Gabriele  Sep 28, 2017 ]
A
Makes installation so much easier. [ Steve  Sep 25, 2017 ]
A
the easiest way to hook the stereo up right [ Jeffery P.  Sep 24, 2017 ]
A
You can't beat the price and this harness makes hooking up a new receiver so much easier than cutting all of the wires. [ Edward  Sep 22, 2017 ]
A
free, came with install [ roger  Sep 21, 2017 ]
A
free [ Charles  Sep 21, 2017 ]
A
another must have unless you get a thrill out of crazy splicing! [ A  Sep 20, 2017 ]
A
it was free... Thank you [ DONNIE T.  Sep 19, 2017 ]
A
Makes installation a lot easier...as you can pre-wire in the house ahead of time. [ JEFF  Sep 15, 2017 ]
A
For my Sister-in-laws vehicle as a gift with another stereo [ LeRoy  Sep 14, 2017 ]
A
Makes it real easy to put the new electronics in a 15 year old vehicle [ Craig  Sep 12, 2017 ]
A
This was part of an installation kit. [ Rob  Sep 04, 2017 ]
A
I hate wiring [ Thomas  Sep 02, 2017 ]
A
Came with the trim kit and was free. [ Kevin  Aug 31, 2017 ]
A
This came free with my purchase [ Brunilda  Aug 29, 2017 ]
A
Fits my vehicle. [ Anthony  Aug 28, 2017 ]
A
easy to connect and plug and play [ MARC  Aug 25, 2017 ]
A
Makes installation much easier. [ Amy  Aug 25, 2017 ]
A
Saves time. Clean install with no impact on the vehicle. [ Tom  Aug 24, 2017 ]
A
To make life easier [ M  Aug 24, 2017 ]
A
it is needed to compete the installation. [ Robert  Aug 21, 2017 ]
A
From my previous order for my !994 E320 Mercedes, the harness is an easy and quick way to wire the stereo. [ Jose  Aug 21, 2017 ]
A
Needed the harness to complete the install. [ Dirk  Aug 18, 2017 ]
A
Part of install package [ Robert  Aug 16, 2017 ]
A
Easy color matching [ Sergio  Aug 14, 2017 ]
A
I will definitely need it to avoid hacking up the factory wiring harness to install the stereo. [ Michael  Aug 11, 2017 ]
A
It was free with purchase of radio which I needed cause don't have one with radio got now and looks bad. Awesome [ Phillip  Aug 10, 2017 ]
A
no cutting wires [ Brian  Aug 09, 2017 ]
A
No need in chopping the factory wiring up, simple, quality installation harness. [ David  Aug 07, 2017 ]
A
Easy to connect [ Ignacio  Aug 06, 2017 ]
A
I chose this item because I don't need to cut the vehicle harness. It also came with the new deck for free. [ Michael  Aug 03, 2017 ]
A
faster [ Kenneth David  Aug 03, 2017 ]
A
easy plug and play hook up [ john wells  Aug 01, 2017 ]
A
This allows for a plug and play installation. Helps to identify the wires to connect the radio harness to. [ CW515  Aug 01, 2017 ]
A
needed for installation [ Raymond  Jul 31, 2017 ]
A
matched my car [ Clifford  Jul 27, 2017 ]
A
easy to use [ W  Jul 24, 2017 ]
A
used for my f150 [ Brian  Jul 23, 2017 ]
A
Free [ DAN  Jul 20, 2017 ]
A
needed it [ Gregory  Jul 11, 2017 ]
A
I purchased a Kenwood car stereo from Crutchfield several years ago and installed it in an F-250. I kept the radio and wiring harness but the harness doesn't fit the 02 Excursion. I'm installing the Kenwood in the Excursion. [ Kim  Jul 03, 2017 ]
A
It was Free [ Peter  Jul 02, 2017 ]
A
This was recommended with the purchase. [ Lawrence  Jun 29, 2017 ]
A
no cutting to factory harness [ Daniel  Jun 26, 2017 ]
A
Same [ Curtis  Jun 23, 2017 ]
A
It is a required component for installation. [ TAMARA  Jun 22, 2017 ]
A
Needed them [ Jason  Jun 18, 2017 ]
A
Came with the install kit and makes the installation to the factory harness easier. [ Michael  Jun 11, 2017 ]
A
need the harness to install the new radio.. and it was free..too good to pass up. [ DANIEL  May 27, 2017 ]
A
Told to by Crutchfield! :) [ aaron  May 25, 2017 ]
A
To install stereo in 2001 Ford F150 [ Kris  May 23, 2017 ]
A
I chose this adapter to avoid destroying my factory wiring harness. [ Shane  May 22, 2017 ]
A
Needed a wiring harness for my 2004 F-350 King Ranch. I've installed radios before and an after-market wiring harness is the only way to go. Seamless installation and you don't make changes to your truck that you can't undo later if you want. [ Louis Shannon  May 16, 2017 ]
A
you gave it to me [ darrell  May 15, 2017 ]
A
this plug allowes direct plugin to my 2013 freightliner truck. [ Arnold  May 14, 2017 ]
A
ease of installation [ Chad  May 09, 2017 ]
A
Needed with new radio [ Jerry  May 08, 2017 ]
A
To install my new head unit. [ BILLY  May 04, 2017 ]
A
Ease of install [ Mark  May 03, 2017 ]
A
Thanks for the awesome suggestions. [ Larry  May 02, 2017 ]
A
Recommended [ Bill  May 01, 2017 ]
A
Included in installation package [ Chris  Apr 26, 2017 ]
A
If you can solider, and have some heat shrink handy, it makes for a very clean install. No need to cut factory wires to install. If you want to remove the new unit, and return the vehicle to factory condition, you simply unplug it, and plug your factory unit back in, with no alteration done to the factory wiring. [ Christopher  Apr 24, 2017 ]
A
Needed [ william  Apr 24, 2017 ]
A
to ease the install [ John  Apr 22, 2017 ]
A
So I can upgrade my stereo without cutting the factory wires [ Keith  Apr 21, 2017 ]
A
Needed for stereo install. [ JACOB  Apr 19, 2017 ]
A
Much easier installation [ Marty  Apr 18, 2017 ]
A
Saves me the hassle of having to drive around looking for one, and coming from Crutchfield I know they've done their homework. So I know it will fit my vehical and at a great price or free. And if I needed help installing it their just a phone call away. [ MIGUEL  Apr 18, 2017 ]
A
This is a great help so you don't have to cut any wires. [ Daniel  Apr 17, 2017 ]
A
Metra makes good stuff and it was free!!! [ Matthew  Apr 16, 2017 ]
A
It was needed for my truck [ Carol  Apr 14, 2017 ]
A
Makes installation easier. [ Allen  Apr 13, 2017 ]
A
Ease of installation. [ Michael  Apr 13, 2017 ]
A
To make sure I would not have issues splicing wires from the original radio. [ Brian L.  Apr 11, 2017 ]
A
It was free [ Shane  Apr 10, 2017 ]
A
Makes install easy [ LORENZO  Apr 09, 2017 ]
A
Needed [ Sonja  Apr 08, 2017 ]
A
Fit my vehicle [ Lawrence  Apr 06, 2017 ]
A
It is part of the installation kit [ Terrance  Apr 06, 2017 ]
A
Needed this [ Jay  Apr 03, 2017 ]
A
Recommended to "interface" easily between the new stereo and the factory wiring. [ Derrick  Mar 31, 2017 ]
A
Included in package [ Kevan  Mar 31, 2017 ]
A
Needed for installation [ Ravyn I.  Mar 30, 2017 ]
A
Kevin helped and explained the proper wire harness for my need. Great information, great help, saved me a ton of money by NOT buying the wrong parts as stated by a local auto parts store. Thanks Kevin [ Paul  Mar 25, 2017 ]
A
I needed this for my stereo. [ Linda  Mar 22, 2017 ]
A
Because you gave it to me "free." [ Cory  Mar 21, 2017 ]
A
Good product [ DARRIEN  Mar 18, 2017 ]
A
These harnesses makes it so much easier to install and you will have less shorts in the system [ Billy  Mar 17, 2017 ]
A
Needed this harness to complete my radio install. [ Ion619  Mar 16, 2017 ]
A
It was free [ Richard  Mar 16, 2017 ]
A
Makes installation a breeze without altering factory wiring harness. [ Jerry  Mar 15, 2017 ]
A
Easier wiring [ J  Mar 12, 2017 ]
A
Good Value [ Jordan  Mar 10, 2017 ]
A
To make installation easier, without the guess work of matching wire colors. [ Victor  Mar 07, 2017 ]
A
Makes install a breeze [ ANDREA  Mar 06, 2017 ]
A
Included in installation kit. I have used a wiring harness from Crutchfield before and it worked like a dream. It made the installation of a new unit extremely easy. [ Christopher  Mar 05, 2017 ]
A
Included in the install kit. One of the big reasons I shop at Crutchfield! [ Kenneth  Mar 04, 2017 ]
A
perfect fit makes it easy to install [ todd  Mar 03, 2017 ]
A
Came with kit. [ John  Mar 02, 2017 ]
A
To simplify the confusion :-D [ Dominik  Feb 27, 2017 ]
A
Ease of wiring installation [ Clyde  Feb 27, 2017 ]
A
Is easy to install the new dvd player just match the color on each cable [ alfonso  Feb 24, 2017 ]
A
makes it easy to install an aftermarket stereo in my truck [ Abel de  Feb 23, 2017 ]
A
to make my install seamless [ Kevin  Feb 22, 2017 ]
A
Keeps factory harness untouched [ Electrician  Feb 21, 2017 ]
A
this makes the job much easier and connecting wire-to-wire smooth! [ Peter  Feb 21, 2017 ]
A
this is the wiring harness i needed for my truck to put my radio in [ Courtland  Feb 20, 2017 ]
A
Crutchfield's products are a good value,for the price.The installation kit makes installing a breeze. [ barry  Feb 18, 2017 ]
A
recommended for install. [ Michael  Feb 15, 2017 ]
A
Recommended [ Trevor  Feb 10, 2017 ]
A
I need this to adapt the aftermarket radio to the OEM harness the installation. [ anthony  Feb 10, 2017 ]
A
To connect my new car stereo to my car's wiring harness. [ Steven  Feb 08, 2017 ]
A
need to hook up new radio [ John  Feb 08, 2017 ]
A
Makes easy installation [ JOSHUA  Feb 07, 2017 ]
A
Replacing stock radio [ Jean-Philippe  Feb 06, 2017 ]
A
They hooked me up with the correct harness no questions asked. [ John  Feb 04, 2017 ]
A
Only way to go! [ Stephen  Feb 02, 2017 ]
A
It makes it so much easier to install your radio. [ Jonathan  Feb 01, 2017 ]
A
Came with my radio for free [ Graham  Jan 31, 2017 ]
A
came with the install kit [ lovethetwins  Jan 28, 2017 ]
A
Makes connecting super simple [ Larry  Jan 25, 2017 ]
A
SNAP FIT, INSTANT CONNECTION FOR THE NEXT TIME IT HAS TO COME OUT, IF EVER. [ Martin  Jan 20, 2017 ]
A
It works and simplifies the job. [ frank  Jan 19, 2017 ]
A
I like the wire harness they make install fast and easy [ Brandon  Jan 19, 2017 ]
A
it makes the install easy :) [ Andy  Jan 08, 2017 ]
A
I didn't want to re-use the other harness from my old aftermarket radio. [ Josh  Jan 06, 2017 ]
A
So that my install would go seamlessly and without damage to the factory wiring harness. [ Scott  Jan 03, 2017 ]
A
a must have [ Sean  Dec 31, 2016 ]
A
Got a stereo for Christmas. Figured this would make installation way easier. Always loved Crutchfield [ Justin  Dec 30, 2016 ]
A
Easy plug and play for you new aftermarket radio [ Nathan  Dec 28, 2016 ]
A
This item comes with the package. [ jeremy  Dec 26, 2016 ]
A
Came free, makes the job much easier. [ Dean  Dec 26, 2016 ]
A
Needed to install new Stereo [ Willliam  Dec 23, 2016 ]
A
Best fit for my vehicle [ Jason  Dec 22, 2016 ]
A
It works [ Ron  Dec 20, 2016 ]
A
The wiring harness simplifies installation making the process truly plug and play (after the wire splicing). [ Michael  Dec 20, 2016 ]
A
for new stereo [ JOHN  Dec 18, 2016 ]
A
works like a charm [ William  Dec 16, 2016 ]
A
included [ Ross  Dec 16, 2016 ]
A
For car stereo complete installation, but not cut the wiring harnes [ Luis  Dec 15, 2016 ]
A
needed to install to my vehicle [ Howard  Dec 13, 2016 ]
A
Very simple to use. [ Jeremy Trey  Dec 12, 2016 ]
A
Needed for install [ Alan  Dec 11, 2016 ]
A
EZ install [ Bruce  Dec 10, 2016 ]
A
Included with receiver purchase. [ Thomas  Dec 08, 2016 ]
A
Looked necessary. [ Michael  Dec 06, 2016 ]
A
Always good to have a wiring harness that is specific to your vehicle. [ Dennis  Dec 06, 2016 ]
A
If you have a Ford Econoline you need this [ Jeff  Dec 05, 2016 ]
A
Came with install kit but with past purchases they fit perfect [ Doug Telecom Tech  Dec 05, 2016 ]
A
Came with my purchase [ Christopher  Dec 04, 2016 ]
A
Need it to connect new CD player to existing vehicle wiring [ Charles W.  Dec 02, 2016 ]
A
Part of installation kit [ William  Dec 01, 2016 ]
A
easy to install and don't need to cut any wire [ carlos  Dec 01, 2016 ]
A
Effortless head unit connection. [ Ed  Nov 29, 2016 ]
A
It is a required part of installing new JVC radio- cd player. [ Dale  Nov 28, 2016 ]
A
To interface from Kenwood wiring harness to vehicle factory wiring - Crutchfield recommendation [ Stephen F.  Nov 28, 2016 ]
A
Easy hook up [ PATRICK T  Nov 25, 2016 ]
A
I chose this item because, I needed to wire my after market stereo. [ barbara  Nov 24, 2016 ]
A
Handy Product [ Roger J.  Nov 21, 2016 ]
A
needed [ Robert  Nov 19, 2016 ]
A
this was needed to complete the install for my sons ford truck [ James  Nov 18, 2016 ]
A
Present [ Renee  Nov 17, 2016 ]
A
Was recommended for my vehicle install. It worked and wires match up according to diagram. [ Daniel  Nov 14, 2016 ]
A
easier to connect to factory wiring [ Joann  Nov 12, 2016 ]
A
The ease of wiring. [ Mac  Nov 08, 2016 ]
A
Recommended for Ford F150, 2003 model. Better than hacking in to the vehicle's harness. Oh, and it's FREE in the install package! [ I  Nov 06, 2016 ]
A
Needed for installation [ Tony  Nov 02, 2016 ]
A
It came with the installation package. [ Rob  Nov 02, 2016 ]
A
Hook up radio rite the first time [ RYAN A  Oct 27, 2016 ]
A
Needed [ Kevin  Oct 24, 2016 ]
A
Easy way to connect new radio [ James  Oct 20, 2016 ]
A
The recomended harness by Crutchfield representative CJ and part of the combo package with purchase. [ Dale  Oct 19, 2016 ]
A
plugs right in [ Jonathan J.  Oct 12, 2016 ]
A
To make stereo installation easier and to be able to retain factory wiring integrity. [ J  Oct 11, 2016 ]
A
These adapter harnesses make easy work out of the head unit install. [ Tim  Oct 06, 2016 ]
A
to make connecting factory wiring harness to new radio easier [ Chad  Oct 04, 2016 ]
A
So you don't have to damage the factory wiring. [ Desert racer  Oct 04, 2016 ]
A
to hook up to factory connections [ Steve  Oct 03, 2016 ]
A
Was needed to connect the radio to the vehicle [ Connor  Oct 02, 2016 ]
A
NEEDED IT [ NELSON  Oct 01, 2016 ]
A
To fit 2005 Ford Escape it just makes the job very simple. [ John Steven  Oct 01, 2016 ]
A
Needed for radio install [ James  Sep 29, 2016 ]
A
Came with the installation kit [ Carl  Sep 29, 2016 ]
A
Was color coded exactly with the Pioneer head unit I purchased at Crutchfield. Was able to solder up this to the head unit plug at the work bench before ever trying to put in the vehicle. [ PAUL  Sep 28, 2016 ]
A
Great, plugged right into the factory harness. [ Brent  Sep 25, 2016 ]
A
I chose Crutchfield's because they are the only seller that includes the receiver wiring harness. [ Laurel  Sep 20, 2016 ]
A
I like having a harness that will connect to my old factory harness as I am not replacing anything other than the receiver. [ Daniel  Sep 16, 2016 ]
A
Included [ Dave  Sep 15, 2016 ]
A
Also needed. [ Christopher  Sep 14, 2016 ]
A
make sure it will work with my truck [ James  Sep 13, 2016 ]
A
I need to be able to connect to my vehicles wire harness, in order to listen to the radio [ Robert  Sep 13, 2016 ]
A
Needed for installation [ Matt  Sep 11, 2016 ]
A
Came with order [ Jon  Sep 11, 2016 ]
A
makes life easy [ TERENCE  Sep 07, 2016 ]
A
really helps for an easy installation. [ Tanya  Sep 07, 2016 ]
A
Makes wiring easy! [ CARY  Sep 06, 2016 ]
A
Matches for may car. [ Joe  Sep 02, 2016 ]
A
Included with order to install in my vehicle [ COREY  Aug 25, 2016 ]
A
Easy hook up to factory connections no soldering of wires [ Garrit albert  Aug 24, 2016 ]
A
Need to install new radio [ Emmett  Aug 19, 2016 ]
A
The last time i was advised what i needed it was perfect and 03 galant is differentthen 03 ford [ Christopher  Aug 17, 2016 ]
A
Free with radio purchased [ AUGUSTO  Aug 17, 2016 ]
A
Adapting an aftermarket head unit to the factory wiring is tricky on a good day. This harness makes it simple! [ THOMAS  Aug 16, 2016 ]
A
almost like plug and play [ Kenneth  Aug 11, 2016 ]
A
It matches my car. [ Joshua  Aug 09, 2016 ]
A
another part i need for my car [ Eddie  Aug 08, 2016 ]
A
To install the new cd player. [ Marc  Aug 08, 2016 ]
A
I have hundreds of hours of wiring background (boats, vehicles, homes) but there is no better substitute for a connector that matches existing hardware when you may need to remove a unit for other work in the dash. [ NEIL A  Aug 07, 2016 ]
A
it was free [ steve  Aug 04, 2016 ]
A
These make installation easy. [ Donald S  Aug 03, 2016 ]
A
Recommendation [ Joshua  Jul 30, 2016 ]
A
It came free [ Joseph  Jul 29, 2016 ]
A
To help with the installation. [ John  Jul 27, 2016 ]
A
Need to install my new radio. [ Joseph  Jul 23, 2016 ]
A
Better than trying to figure out which wires go where after cutting the OEM harness [ Chad  Jul 21, 2016 ]
A
You need the harness for a quick install. [ Gerlad J.  Jul 20, 2016 ]
A
Need it for the install [ Miguel  Jul 18, 2016 ]
A
Ease of installation [ JESUS  Jul 15, 2016 ]
A
makes for easy install [ H  Jul 09, 2016 ]
A
Needed for installation of new radio. [ MARTIN  Jul 06, 2016 ]
A
Came in a kit form [ Z  Jul 06, 2016 ]
A
Simple connection for ford harnesses [ Robert  Jul 03, 2016 ]
A
It fit my factory wiring harness. [ Willie  Jun 27, 2016 ]
A
Is good [ Gerardo  Jun 24, 2016 ]
A
The best way to install a headunit is to use a wiring harness and leave the stock wiring connections in place [ Todd  Jun 24, 2016 ]
A
Need it for easy installation! [ Sokhang  Jun 21, 2016 ]
A
needed for stereo [ Antonio   Jun 20, 2016 ]
A
Free, w/new receiver. [ Steven Craig  Jun 19, 2016 ]
A
Free [ Nathan  Jun 17, 2016 ]
A
This item will allow me to mate the speakers that are presently in the vehicle with the audio device that I purchased. After the color compatible wires have been connected between the radio and wiring harness, it a simple matter of "plug and play". [ john  Jun 15, 2016 ]
A
Complete installation [ Carlos  Jun 13, 2016 ]
A
They told me I needed it. [ Christine  Jun 12, 2016 ]
A
Had my stereo in 2005 Jaguar, got rid of the car, kept the stereo, installing in my truck. [ Ronald  Jun 11, 2016 ]
A
It was included for free [ Johnathan  Jun 10, 2016 ]
A
To hook my new stereo up [ eugene  Jun 10, 2016 ]
A
Great product to aid in an easy installation. [ GEORGE  Jun 08, 2016 ]
A
for connecting to the original radio plug. [ JOHN  Jun 07, 2016 ]
A
It's a great extra from Crutchfield to get what you need for successful installation...and they're free. [ MICHAEL  Jun 04, 2016 ]
A
Hooks right up [ Vanessa  Jun 04, 2016 ]
A
to make install easier [ Tom  Jun 03, 2016 ]
A
Free.. And needed... [ Robert  May 31, 2016 ]
A
Easy connect [ victor  May 30, 2016 ]
A
It was part of the install kit needed for easy replacement of the factory radio. [ Jayson  May 30, 2016 ]
A
To make job easier. [ JOSHUA  May 26, 2016 ]
A
makes installation easier [ william  May 24, 2016 ]
A
Great for ease of install without cutting into the factory harness [ Chris  May 24, 2016 ]
A
These are great for interfacing with the stock stereo plugs in a ford which keeps you from chopping wire and having to figure out which wire does what. [ Conrad  May 23, 2016 ]
A
Makes for a clean installment of the new radio to integrate with factory vehicle wiring harness. [ E Darrell  May 20, 2016 ]
A
Bought this because it was listed as an accessory and I didn't want to get into the installation job only to find I didn't have the right components to complete it. [ JOHN A  May 18, 2016 ]
A
makes it easy to install radio [ Thaddeus  May 13, 2016 ]
A
Made wiring into the factory harness easy. I can still re install my original radio using the factory plug by leaving it and using the adapter. Worked perfectly. [ Dean  May 13, 2016 ]
A
Easy install. [ Blaine  May 12, 2016 ]
A
recommended for my vehicle [ Mark  May 12, 2016 ]
A
Was recommended for radio to make a much neater wiring. [ Howard  May 09, 2016 ]
A
so I would not have to cut factory wiring [ Steven C.  May 09, 2016 ]
A
To help with the wiring install for the Deck. [ Vincent  May 05, 2016 ]
A
Can you believe it came free with my car stereo purchase [ KATHKLEEN  May 05, 2016 ]
A
It's a necessary item to install a stereo correctly. [ Vince  May 03, 2016 ]
A
Picked based on a recommendation from one of your online support techs - Chad. Chad's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=24 [ Andrew  Apr 29, 2016 ]
A
Recommended by Crutchfield [ Bernie  Apr 27, 2016 ]
A
Necessary for ease of installation. [ James Andrew  Apr 26, 2016 ]
A
Needed [ Michael  Apr 23, 2016 ]
A
To insure that the correct wiring configuration. [ Kit  Apr 21, 2016 ]
A
Included with install kit. [ Robert  Apr 20, 2016 ]
A
free [ William  Apr 17, 2016 ]
A
Couldn't have been easier to solder my JVC head unit outputs to fit the factory harness [ Paul  Apr 17, 2016 ]
A
Makes an easy install without cutting into factory wiring. [ Emmanuel  Apr 16, 2016 ]
A
In case I ever want to put the factory radio back [ Brian  Apr 15, 2016 ]
A
Needed for installation [ ALAN  Apr 12, 2016 ]
A
Needed it. [ Mark  Apr 10, 2016 ]
A
This harness adapter is required to install the new radio by adapting to the factory wiring harness rather than cutting and splicing the factory wiring harness. [ Paul  Apr 09, 2016 ]
A
To ease in installation of new radio. [ Rick  Apr 08, 2016 ]
A
Needed it and it was free [ Michael  Mar 31, 2016 ]
A
Paul whom I was able to chat with was great help, I counted on his recommendation and expertise, very easy to shop without the worry of ordering the wrong parts. Cost was very reasonable. Paul's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101 [ Sabino  Mar 30, 2016 ]
A
It was free. [ Leonard  Mar 28, 2016 ]
A
Pigtails make hooking to the factory wiring harness plug and play. No messy butt connectors and black tape. And Crutchfield supplied it free of charge. [ Mark D.  Mar 25, 2016 ]
A
It was also offered with the radio purchase and I feel it will definitely help out with the installation. Makes it so much easier to install a head unit when the factory harness hasn't been cut out of the vehicle. [ Lonny  Mar 17, 2016 ]
A
Ease of installation. [ john  Mar 16, 2016 ]
A
Simple and reliable color coded wiring done before the unit is installed in the vehicle. Then just plug and play! [ James  Mar 13, 2016 ]
A
Way easier to connect factory harness to radio without cutting up factory harness. A must-have. [ Torry  Mar 11, 2016 ]
A
to change radio later [ E  Mar 11, 2016 ]
A
It came free with the radio. [ David  Mar 06, 2016 ]
A
They simplify the installation of the item purchase. [ Ashley  Feb 29, 2016 ]
A
Crutchfield recommended for installation. [ Leonard K.  Feb 26, 2016 ]
A
Make wiring a after market head unit easy [ Anthony  Feb 24, 2016 ]
A
This will make installation much easier. [ Michael  Feb 22, 2016 ]
A
To do a factory hookup to the factory harness. [ Charles  Feb 21, 2016 ]
A
Part of install package [ David  Feb 21, 2016 ]
A
Its what was needed for new installation [ Larry  Feb 19, 2016 ]
A
To simplify the install of my new Radio! [ timothy  Feb 19, 2016 ]
A
tech suggested it [ Ashley  Feb 19, 2016 ]
A
It appears it will be required to install a Pioneer receiver in a 2010 Ford Crown Victoria Police Interceptor to bridge from the factory 16 pin plug to the Pioneer harness [ Bruce  Feb 16, 2016 ]
A
Needed for the install [ brian  Feb 13, 2016 ]
A
Part of the install package. [ John  Feb 06, 2016 ]
A
This harness will keep you from having to hack up the factory wiring harness [ EDWARD  Feb 06, 2016 ]
A
Fits well [ Robert  Jan 31, 2016 ]
A
It makes it much easier to install [ Wallace  Jan 25, 2016 ]
A
Wire in house and just plug and play. [ AnnMarie  Jan 23, 2016 ]
A
The factory harness on my 2002 F250 has a female connection. I had a metro 71-1771 but that is also female. Metra 70-1771 is a male connector and what I need. [ ADAM  Jan 23, 2016 ]
A
Worked great for connecting up to Ford's stock wiring harness. [ Eric  Jan 20, 2016 ]
A
i'll need it to connect power, speakers etc. [ Kelly  Jan 19, 2016 ]
A
The fact that crutchfield gives these out for free is a lifesaver! No more going store to store looking for the correct harness and usually paying more than if you actually purchased one with Crutchfield. Don't ever cut your factory harness it just makes for more work and depending who is doing the install, a messier installation. Plus, reinstalling the factory stereo when your lease is up or you choose to sell your car is a breeze when the stock harness is intact. [ Mark  Jan 18, 2016 ]
A
Was a quick and simple process to connect my new Kenwood H.U. to the factory wiring harness. Saves time and makes for a clean install. [ titanium man  Jan 18, 2016 ]
A
Used before it worked great. [ vincent  Jan 15, 2016 ]
A
a lot cleaner job with install [ TERRA D  Jan 13, 2016 ]
A
I do not like hacking the factory harness as I tend to move my aftermarket stereos from one vehicle to the next and reinstall the factory radio when I sell the vehicle. [ ERIC  Jan 04, 2016 ]
A
This came as a free addition for installation. When using this harness it saves a whole lot of time when wiring the audio/electrical [ Jonathan  Jan 01, 2016 ]
A
stereo connection [ LUIS  Dec 28, 2015 ]
A
I picked the Metra Receiver wiring harness to connect a Radio Receiver to my Ford Ranger it match up perfectly. [ JAMES T  Dec 23, 2015 ]
A
Needed this for my aftermarket stereo install and it works great!!!! [ Brian  Dec 21, 2015 ]
A
connect the new radio to the original equipment cables [ Pedro  Dec 18, 2015 ]
A
I have been selling and installing metra kits for over 25 years.. I have never had a problem with fit or finish [ ROBERT  Dec 18, 2015 ]
A
Oh, just absolutely splendid to deal with Crutchfield since I was a young fellar. Now I'm buying my children car audio and it's fun and easy. [ Mark  Dec 17, 2015 ]
A
I always use the crutchfield harness, because they make the installations easy. [ Dezmetriuso  Dec 17, 2015 ]
A
to make installation eaiser [ Robert  Dec 16, 2015 ]
A
Comes with the radio model. [ George F.  Dec 14, 2015 ]
A
Needed for my new radio [ Lawrence  Dec 13, 2015 ]
A
To tie into factory wiring without any issues. [ SHARON L.  Dec 13, 2015 ]
A
All of the ones I've used, (4 ea) have been perfectly color coded to my vehicle. You can't go wrong. Cut install time greatly! [ Micheal  Dec 13, 2015 ]
A
Just looking to make installation as easy as possible [ Dwayne  Dec 12, 2015 ]
A
To Terminate to existing speaker wiring [ William  Dec 08, 2015 ]
A
Needed [ C. J  Dec 08, 2015 ]
A
Required for install [ Michael  Dec 08, 2015 ]
A
recommended by website [ Sherry  Dec 07, 2015 ]
A
advisor [ JAMES  Dec 07, 2015 ]
A
For install [ Heather  Dec 06, 2015 ]
A
It was a direct fit for the stereo and truck I am going to put it in. [ Dale  Dec 05, 2015 ]
A
ease of installation [ Keith  Dec 03, 2015 ]
SHOW MORESHOW LESS

7 questions already asked

Q
will this work in a ssl sd10.1b?
[ Zachary  Apr 23, 2018 ]
1 answer
A
This Metra wiring harness prevents you from having to cut your vehicle's factory radio plug when replacing your factory radio with an aftermarket radio. The black plug connects to your factory radio plug and the wires connect to the wiring harness that came with your aftermarket radio. Also Note: the Metra 70- 1771 is vehicle specific- this model is used for 1998-2011 Ford, Lincoln, Mercury, and Mazda vehicles.
[ Mark  May 02, 2018 ]
Q
How do I unplug it after I've plugged it in?
[ Medicmw  Feb 21, 2018 ]
1 answer
A
Lift the small locking tab, while lifted pull the plug and socket apart.
[ ROBERT  Feb 21, 2018 ]
Q
2011 Ranger with SiriusXM radio and external input. How do I know what stereo I have?
[ Eric  Aug 08, 2017 ]
1 answer
A
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what fits and what you will need for an installation in your vehicle.
[ Kenny  Aug 08, 2017 ]  Staff
Q
Can I replace the stock stereo in my 2003 ford explorer sport trac with a clarion duz385sat?
[ Nathan  Dec 20, 2016 ]
1 answer
A
You can check to see what fits your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what fits and what you will need for an installation in your vehicle.
[ Kenny  Dec 21, 2016 ]  Staff
Q
Don't I need a blue wire to connect an amp? What else do I need to buy?
[ T  Nov 19, 2016 ]
1 answer
A
This will depend largely on your vehicle. For details on installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what you will need for an installation.
[ Kenny  Nov 19, 2016 ]  Staff
Q
what years are compatible for a 2000 Ford F-150 factory stereo harness ?
[ jeff  Oct 12, 2015 ]
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Krissy  Oct 13, 2015 ]  Staff
Q
i have 2003 f-150 ,my factory stereo has 2 plugs on back of radio,a rectangular one and square one,do I need both wiring harnesses to install my new aftermarket radio?
[ randy  Oct 18, 2014 ]
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Krissy  Oct 20, 2014 ]  Staff
SHOW MORESHOW LESS

Loading articles...

TOP