Contact us
Close contact box

Metra 70-5519 Receiver Wiring Harness

Connect a new car stereo in select 2001-03 Ford and Lincoln vehicles

Item # 120705519

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical...

Find what Fits your car

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical...

Item # 120705519

In Stock
C$19.99
Add to wishlist

About the Metra 70-5519 Receiver Wiring Harness

Metra 70-5519 Receiver Wiring Harness

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.

Metra 70-5519 Receiver Wiring Harness

Installation Note: This harness uses your factory amplifier; your new stereo must have one pair of preamp outputs to connect this harness.

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.

First, attach the color-coded wires on your Crutchfield-supplied harness to the wires from your new stereo. If you're not using a soldering iron, we recommend that you purchase some wire connectors to secure the connections. Check out our handy article on three ways to connect the wiring harness here.

Now, once this harness is connected to your new stereo, you'll be able to plug right into your car's factory radio connector. This harness makes installing your new stereo easier, and allows you to put the factory radio back when you sell your vehicle or return it at the end of the lease. A detailed instruction sheet comes with the harness. Warranty: 60 days.

Please read this important note: This harness may not contain provisions for every wire needed to complete your installation, and it will not accommodate special navigation, video, or factory steering wheel control connections. You will need a special adapter if you want your factory steering wheel audio controls to work with your new stereo.

READ LESS

What's in the box:

  • 7" Wiring harness
  • 12" RCA harness

Customer reviews

Loading reviews...

Metra 70-5519 Receiver Wiring Harness Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the Metra 70-5519 Receiver Wiring Harness

Stacey B.

Product Research

Features

Wiring Harness: This wiring harness prevenst you from having to cut your vehicle's factory radio plug when replacing your factory radio with an aftermarket head unit. Simply solder or crimp the wiring harness to your aftermarket head unit's harness (solder & crimps not included), plug the aftermarket head unit's plug into the rear chassis of the aftermarket head unit, and plug the wiring harness into your vehicle's factory radio plug.

Note: Installation tools, hardware, & accessories are not included & sold separately. Please see the Accessories tab for recommendations & availability.

Wiring Notes: If the wiring harness is not equipped with a ground wire, you will need to ground the aftermarket head unit's ground wire to the metal chassis of your vehicle. Some vehicle's may require you to bypass the vehicle's factory amplifier (in another location from factory radio) or hardwire certain connections. If your vehicle is equipped with factory steering wheel controls, an additional adapter is required & sold separately.

Wire Code Chart:

(Receiver Wiring Harness)

Wire Color Function
Red +12 Volt Accessory
Yellow +12 Volt Constant
Black Chassis Ground
Black/White Amp Ground
Orange Illumination
Orange/Black Not Used (tape-off)
White Left Front Speaker +
White/Black Left Front Speaker -
Gray Right Front Speaker +
Gray/Black Right Front Speaker -
Green Left Rear Speaker +
Green/Black Left Rear Speaker -
Violet Right Rear Speaker +
Violet/Black Right Rear Speaker -

(Subwoofer/Center-Channel Harness)

Wire Color Function
Black/White Amp Ground
Black/White Amp Ground
Blue/White Amp Turn-On
Blue/White Amp Turn-On
White RCA Subwoofer Channel
Red RCA Center Channel

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
Need to install [ Martin  Feb 04, 2019 ]
A
made vehicle and radio compatible. was available as option from seller. [ larry  May 09, 2018 ]
A
to keep everything neat and all color coded it looks like it will be easy to use [ Matthew  Jan 04, 2018 ]
A
included to connect to factory radio one of the great features of Crutchfield [ Scott  Aug 29, 2017 ]
A
Supposed to fit wife's Thunderbird [ A  Jan 31, 2017 ]
SHOW MORESHOW LESS

4 questions already asked

Q
So this is what I need to replace my Mach 1000 head with an after market am/fm/cd/bt?
[ Jimmy  Sep 01, 2018 ]
1 answer
A
Yeah this worked perfect for wiring up my pioneer headunit
[ Jonathan  Sep 01, 2018 ]
Q
WHERE DO THE BLUE AND WHITE WIRES AND THE BLACK AND WHITE WIRES GO THAT ARE CONNECTED TO THE SAME PIECE AS THE RCA?
[ JD  Nov 13, 2016 ]
1 answer
A
Thanks for your question. Go to the product page and click on the "Details" tab, you will see a full description of all the wires. If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the connections. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
[ Kenny  Nov 14, 2016 ]  Staff
Q
the factory plugin to the original reciever has been cut off.will your wires match up?
[ brian  Nov 04, 2015 ]
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Krissy  Nov 04, 2015 ]  Staff
Q
What do you plug the RCA plugs to?
[ eCoog  Sep 22, 2014 ]
5 answers
A
In the sub woofer rca
[ DAVID C  Sep 24, 2014 ]
A
Plugged them in and big difference... Thanks!
[ eCoog  Sep 23, 2014 ]
A
The back of your stereo. Subwoober out or rear output.
[ DAVID  Sep 22, 2014 ]
A
I thought I plugged them into the back of the unit.
[ ZACH E  Sep 22, 2014 ]
A
Nothing!
[ JACOB  Sep 22, 2014 ]

Loading articles...

TOP