About the Metra 72-7303 Speaker Wiring Harness
These harnesses allow you to plug your new speakers into the factory connectors present in your vehicle's speaker openings. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if these adapters are compatible with your vehicle. Sold as pairs. Warranty: 1 year.
Note: Some aftermarket speakers have terminals that are wider than this harness's slide-on connectors. You may need to widen the harness's female slide-on connectors, or use the slide terminals that may be included with the speakers. If you need to connect your new speaker's connectors to the harness, soldering is best, and crimping is also very popular — see "Accessories."
What's in the box:
- 2 Speaker harnesses
More details on the Metra 72-7303 Speaker Wiring Harness
Crutchfield Speaker Harness: Crutchfield speaker harnesses prevent having to cut your vehicle's factory speaker wires when replacing your factory speakers with aftermarket car speakers. The Crutchfield speaker harness features two female quick-slide connectors on one end to attach directly to your new aftermarket car speakers, and a proprietary Molex connector on the other end that connects to your vehicle's factory speaker plug. Please enter your vehicle information to confirm fit.
Quick-Slide Connectors: The Crutchfield speaker harness is equipped with a large (positive) & small (negative) female quick-slide terminal. These quick-slide terminals fit directly onto most aftermarket car stereo speaker terminals (slight crimping may be required). In rare cases that the quick-slide terminals do not fit your car speaker terminals, you will need to solder the Crutchfield speaker harness to your aftermarket speaker's terminals or replace the quick-slide connectors on the Crutchfield speaker harness with the correct size terminal.
Note: Installation tools, hardware, and accessories are not included and sold separately. Please see the Accessories tab for recommendations and availability.
Quick-Slide Terminal Measurements: The positive female quick-slide terminal measures 0.205" (inner width), while the negative female quick-slide terminal measures 0.110" (inner width).
Wire Code Chart: Two identical Crutchfield speaker harnesses are included.