About the Metra 82-8139 Speaker Mounting Brackets
Metra's 82-8139 brackets will allow you to install select 5-1/4" or 6-1/2" speakers in the factory speaker openings of select 1993-98 Toyota T100 models. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to confirm that these adapters are compatible with your vehicle. Warranty: 60 days.
Important Note: Some 6-1/2" speakers use a larger frame and require a larger cutout. We call these 6-3/4" speakers, and they won't fit in this bracket. This bracket will only work with speakers that require a cutout diameter of 5-1/8" or less.
What's in the box:
- Two speaker adapter brackets
- Eight 3/4" Screws
- 8 Nylon screw inserts
Metra 82-8139 Speaker Mounting Brackets reviews
Exactly what I needed. Excellent part that fits perfect just like the original.
0 of 1 found this helpful
This product was an excellent fitment. It let me put a larger speaker in the front doors of my truck. That gave me more options when it came to speaker choice and quality. Very happy with this product.
Pros: Good fitment. Easy install.
1 of 1 found this helpful
Everything worked quite well for 1997 t100 except the nylon inserts that go into door frame, they were slightly to big, had to manipulate the 4 spots for them so they were slightly bigger and would take the nylon inserts.
0 of 0 found this helpful
Fit my 96 t100 perfectly. Also, it was free. Crutchfield knew i would need it.
0 of 1 found this helpful
The Toyota Mounts were beautifully made but the holes were too big for my speakers... We didn't use them and had to improvise with some hand cut plywood.. I didn't have time to send them back because I was at my brother's house in Florida and he was helping me install them...so we did what would hold them it... it wasn't pretty.
Pros: Great product and well made and thought out...
Cons: The person who pulled this order didn't check the speaker size of the holes and sent mounts that were too big for my speakers...
0 of 2 found this helpful
Perfect fit, worked as advertised
Pros: Does exactly what it said, went from stock 5.5in to 6.5in
2 of 3 found this helpful
Fit in the stock brackets position perfectly. Just like the stock bracket. Only problem I had was there are little slits for the screws to go into to hold the speaker to the bracked. You can see them in the photo on the front of the bracket. Well any ways, they were a little too close to the center for my 6 1/2 speakers. In other words. I had to drill in an angle twords the center of the bracket to screw the speaker into the sidewall of the bracket. Sounds kinda weird but only took me two minutes for the both of them. Maybe the speaker screw holes were just spaced out a little far. I dont know. But they work fine
7 of 8 found this helpful
More details on the Metra 82-8139 Speaker Mounting Brackets
Overview: As of 11/17/14, the 82-8139 is compatible with select 1993-1998 Toyota trucks. The bracket is designed to allow easy replacement of the factory speakers with select aftermarket 6-1/2 and 5-1/4 speakers. Enter your vehicle information to confirm fit in your vehicle.
6-1/2 Speakers: 6-1/2 speakers with the 3-hole bolt pattern or the symmetrical 4-hole bolt pattern can be mounted using the tabs around the inner speaker opening of this bracket (if the hole spacing matches).
5-1/4 Speakers: The frame diameter of a some 5-1/4s is smaller than the brackets' cutout; in these cases a speaker baffle should be used to seal the rear of the speaker.
- Cutout Diameter: 5.083"
- Height: 0.875"-1.18"
- Three-Hole Spacing (6-1/2): 4.56"-4.89"
- Four-Hole Spacing (5-1/4):
- Perimeter: 3.72"-4"
- Diagonal: 5.25"-5.685"
Q Crutchfield asked: Why did you buy this?