About the Metra 82-8150 Speaker Mounting Brackets
Metra 82-8150 speaker mounting brackets
These brackets will allow you to install select 6-1/2" or 6-3/4" speakers in the front doors of select 2012-up Toyota Camry models. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if these adapters are compatible with your vehicle. These adapters are priced per the pair of brackets. Warranty: 60 days.
More details on the Metra 82-8150 Speaker Mounting Brackets
Overview: As of 11/13/14, the 82-8150 is compatible with select 2012-2014 Toyota models. The bracket is designed to allow easy replacement of the factory speakers with select aftermarket 6-1/2 and 6-3/4 speakers. (Please refer to the Crutchfield Vehicle Selector to confirm fit in your vehicle.)
6-3/4 Speakers: For a 6-3/4 speaker to fit in the opening of this bracket, the tabs around the inner speaker opening will need to be removed. They are scored along the bottom for easy removal, but still may require pliers and a file.
6-1/2 Speakers: 6-1/2 speakers with the 3-hole bolt pattern or the symmetrical 4-hole bolt pattern can be mounted using the tabs around the inner speaker opening of this bracket.
5-1/4 Speakers: While a 5-1/4 speaker will mount easily in this bracket given the bolt pattern, the frame of a typical 5-1/4 is approximately 1/2" smaller than the opening in the bracket, making a 6-1/2 or 6-3/4 a better fit. When using a 5-1/4, a speaker baffle must also be used to seal the rear of the speaker.
- Inner Diameter: 5.744" (not accounting for the inner tabs)
- Height: 1.05"
- Three-Hole Tab Spacing (6-1/2): 4.637"-4.928"
- Four-Hole Tab Spacing (6-1/2):
- Perimeter: 3.8"-4.03"
- Diagonal: 5.36"-5.68"
- Four-Hole Spacing (6-3/4):
- Perimeter: 4.4"
- Diagonal: 6.225"
Q Crutchfield asked: Why did you buy this?
1 question already asked