Metra 82-8153 Speaker Mounting Brackets

These worked well for the front door speakers in my 2006 Tundra DC. Only two of the three holes lined up with the original holes, but there is enough meat on the bracket for the hole the doesn't line up to drill another hole so it lines up

Have questions for
?

works as it should.

perfect fit, no problems

Have questions for
?

Works... with modification (04 Tundra)

Used in a 2004 Tundra double cab for the front. The brackets fit with the speakers, but only to get them to fit the Tundra you have to modify the screw holes; the top one we had to drill out to be higher. I've used a handful of metra mounting brackets in the past and this always seems to be the case; some modification is needed to make it fit. These are very hard plastic so you will need a dremel or drill to bore them out.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Made installation of my JBL Club 622 into my 2006 Sequoia a breeze!

Have questions for
?

Metra speaker bracket

Good quality

Have questions for
?

Great Bracket

Worked perfect with my Infinity speakers on the front door of my 2005 Sequoia

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Used with Kicker 6 3/4" speakers for 2005 Toyota Sequoia front door. Holes do not line up and needed to expand upper hole for all three screws to work. Also, needed to remove inner tabs to allow speaker to fit. Mounted midrange with one screw on top of the woofer after installed. worked well. Used foam (not included) between door and bracket and under speaker. Worked, but needed modifications.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Great fit for my 2005 Tundra's front doors. The screw holes were slightly off but got it to work with no issues.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

These do not match up. New holes had to be drilled to use.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

They fit.

Have questions for
?

Poorly matched adapter bracket & speakers.

Hole centers for this adapter are 6 1/4". The companion speakers ( Rockford Fosgate R1675X2 6-3/4" 2-way Speakers Item #575R1675X2) don't fit with 6 1/2" hole centers. The work around is to clock the speaker a bit & drill new holes in the supplied adapter bracket. Oh, plus a trip the the hardware store for a fist full of #8 machine screws & nuts. A real time burner.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Worked & fit with minor modifications, had to grind off the tabs but that was expected.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

I gave these a 3 star rating because the mounting holes didn't exactly line up with the factory holes. I had to slightly bend it to make it work so I used a file and made them work correctly. I was expecting them to line up perfectly but I guess that's not how it's supposed towork.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Worked great.

Have questions for
?

Austin successful install

After some customization, I was able to mount the speakers. Holes didn't line up to the door and screws were too small

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

These brackets are great. Worked perfect for my application. Highly reccomend

Have questions for
?

Modification needed on 2005 Tundra

These got the job done but not without having to modify them to get them to fit into the door. Was also only able to secure 2 or three 3 screws into the door.

Have questions for
?

I love you guys

Very happy with my product I even bought additional speakers and it came with with everything I needed extra wires brackets everything I'm very happy with you guys thank you so much

Have questions for
?

Little modification and they work

Good brackets with alot of options but did need to modify. On my 06 Tundra double cab front speaker had to wallow hole on top hole. Also no instructions so just had to think a little. Did find speaker was not sitting correctly and realized I had to wiggle interior fingers and break them off.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Adapters worked well. Had to break off the inner tabs to make the speakers fit flush. Would have been nice if they had provided some foam tape for a better vibration free connection.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

These work very well as replacements (not additions) to the factory mounts

Have questions for
?

Tundra with JBL

It's difficult to find replacement Speakers for a tundra with a factory JBL system. These adaptors did work but required some modification. Over all I'm happy with the install.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

good fit for the 05 tundra where we removed the JBL system these were needed to make the new Kenwood speakers fit with no gaps easy to use and install

Have questions for
?

Dremel Tool Mandatory

These absolutely did not fit my vehicle, I had to modify them entirely to get them to fit with a Dremel tool and even then, they still didn't fit 100% properly.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Not a direct fit but we made them work. Can't beat the price though.

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

We thought the new speakers might not fit but again Crutchfield knew what we needed for my vehicle to make everything work. Thanks Crutchfield

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Good fit.

Have questions for
?

Not really right for 1st gen Sequoia with 8 speaker JVC

After my factory front speakers blew out for the second time, I figured it was time to completely replace them instead of repairing again. I didn't want to have to do much research so I went to Crutchfield. If the Toyota Sequoia only had a single 6.5 inch speaker up front then this bracket and the wiring harness that Crutchfield so generously provides would work fine. However, the Sequoia also has a midrange speaker in front to be accounted for because the 6.5" speaker is a woofer and only receives lower frequencies through its designated wire pair. The new 6.5" speakers that I bought along with the mounting bracket and harness installation could work, with the exception of the midrange speaker left dangling because the harness and mount do not account for it. I called tech support and got a technician who told me to simply cut the midrange speaker off because it wasn't necessary since the new speaker was full range. This was bad advice because as soon as I did that, I lost all midrange and the speaker now functioned only as a woofer. I had to splice the midrange speaker wires to reconnect it and had to improvise a mount for it. If this mounting bracket had a place to mount the factory midrange then everything would have worked perfectly. Alternatively if the wiring harness and circuitry could somehow consolidate the original 2 wire pairs (1 pair for woofer and 1 for midrange) into a single pair that carried lows and mids then it would have worked as

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

They fit well and feel solid. I feel the price was good also

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Fits great

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Excellent product fit was on the money extremely satisfied

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Speaker mounts were the wrong ones. They didn't fit the speakers and didn't match up to my vehicle either.

Have questions for
?

Satisfied

True to form. Great solution

Have questions for
?

Metra 82-8153 Speaker Mounting Brackets

Came free with the speakers so can't complain about price. And the exact bracket I needed to replace the door speakers in my 2006 Tundra with the factory JBL system.

Have questions for
?