Metra 82-8900 Speaker Mounting Brackets

Works exactly as intended. Documentation was a little unclear, referenced 'included' screws, but didn't include any. Not a big deal, but a quick call to Crutchfield confirmed I needed to supply my own.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

These adapters pushed the speakers right up against my door panel and now I have a terrible rattle that I can't get rid of. The speakers I'm running are the Rockford Fosgate T1650 in my 2007 forester.

Have questions for
?

Good fit.

These line up perfectly with the stock mounting points. I used butyl tape to seal up the air gap around the edges. Made the install go nicely.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Got the job done for my 2006 forester,

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Easy to install worked well

Have questions for
?

Easy!

Everything fit, but make sure your new speakers comes with screws!

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Exactly what I needed , crutchfield has everything for installation!

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Very good product for the price and makes the installation a breeze

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Great product and extremely quick to get and install .

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Nice universal mount. Made speaker installation easy on my Forester.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

They fit very well like these alot wish I could have got for the rear door as well

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Perfect fit. Easy to install

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

These fit alright. Installed a Rockford Fosgate P165-se kit in my 2005 Subaru Outback XT. The aftermarket speakers are 6.5" and the Mounting Brackets say you only need to break the inner tabs off to fit 6 3/4" speakers. Which you actually have to break off the inner tabs to fit 6.5" speakers and I still had to bend the mounting brackets to mount the speakers and the holes still were not lined up very well. I still got them to work and they work pretty decently.

Have questions for
?

Great speaker adapter

Pretty good I really like it

Have questions for
?

no bueno for 06 forester and rockford fosgate speakers

didn't work for rockford fosgate speakers. doesn't fit the speaker at all. didn't line up with my door at all. had to drill new holes regardless of how i did it.. speaker isn't snug with adapter. sticks out too far and hits my door panel now.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

As far as an OEM speaker adapter for a 2010 Subaru Outback goes, it's doesn't get much better than this. Removing the internal tabs (per the instructions) fit my Rockford Fosgate T2 6.5's perfectly. The screws that came with the speakers were slightly longer than the depth of the adapter itself which actually worked to my advantage. I drilled holes into the sheet metal behind the adapter ring which allowed the speaker screws to bite not only the plastic speaker ring but also the sheet metal. I'm throwing at least 150 watts to the speaker (Bi-Amped Rockford Fosgate T1000-4) and the adapter doesn't flex or give. Plus the 6.75" fast ring fits right over the top. All and all, whether they're free with your speaker purchase or you buy them yourself, having them for a 2010 Subaru Outback is a no brainer.

Have questions for
?

Good

They did work for my 2010 subaru forester in the fronts and for the rears. I ordered rear speakers for the rear and crutchfield sent schoche brackets and they don't line up. Had to drill a hole for third screw. The metra ones work very well and line up perfectly even though you figure out were they line up. Fit perfect. For my car I did have to fill in a few gaps to get a good seal. But other than that I was pretty happy with metra.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Great adapters, worked well. I did have to cut the tabs off the inner ring on each one, but was very easy. Once I did that, the 6.5" speakers I ordered screwed right in. Thank you!

Have questions for
?

Perfect Fit!

Perfect adapter for a seamless installation of aftermarket 6.5" speakers in the front of my 2005 Subaru Outback XT.

Have questions for
?

Will deal with Crutchfield again!!!

Awesome! Exact fit and wonderful upgrade for my son's 1st car! (2003 Subaru Forrester) Dealing with Crutchfield and the gentleman who helped use was amazing. Was able to up grade front speakers and wires as well. Easy "plug and play" style install by ourselves as gentleman help us to get everything from the touch screen radio, to the speakers and even the mounting screws!!

Have questions for
?

These aren't perfect, but they helped.

I was able to re-use the factory mounting locations and screws in my 09 Subaru forester to mount new 6.5" drivers. It would be nice if they came with gaskets, i just used some weatherstripping i had laying around. I did have to cut off all of the tabs on the inside so my speakers would fit in them. perhaps they are meant to fit smaller speakers as well. No biggie, just snipped them off with wire cutters and cleaned up with a file.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Had to saw off the nubs on the inside of ring to correctly fit my speakers.

Have questions for
?

They work plain and simple.

It gets the job done. Period. I've gotten these speaker adapters before with previous purchases. I don't understand how some people don't know how to use them? Line up the mounting holes with the original. I understand on some cars there might be some modification but hey that's part of life for us do it yourself types.

Have questions for
?

Easy install!

Made installation a breeze!

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

They work!

Have questions for
?

Just get the bracket

These brackets were a perfect fit for my 2011 Subaru Outback. A must have for my install the speaker would have come in close contact with the window when it was down. Matched up really smoothly with my kenwood speakers.

Have questions for
?

Fit my 2006 Subaru Outback.

These brackets lined up perfectly with the existing holes on the front doors of my 2006 Subaru Outback. These made installation easy along with using the Metra 72-8104 Speaker Harness.

Have questions for
?

2014 Legacy and 5 hours of trimming for speakers to fit.

If you drive a Subaru...you need these. Most likely for the front AND rears. Stupid stupid stupid design on Subaru's part but hey other than that and head gaskets they're a solid enough vehicle so we put up with it.

Have questions for
?

2013 Forester adapter

Perfect adapter for my 2013 Subaru Forester. I added some padding to go between the adapter and the door panel.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

No instructions, and the holes attaching the brackets to the speakers didn't match, so they were probably the wrong brackets. At least the brackets were the right diameter so they were easy to drill.

Have questions for
?

Excellent

2005 Subaru Outback- inside Tabs of the brackets need to come off before placing speaker in (needle nose pliers work great). After that, things are a breeze.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

These will fit both front AND rear doors in a 2013 Subaru Legacy. Also, don't be fooled by Crutchfield's notes about the 2013 Legacy, it will require these brackets if you buy 5 1/4" speakers for the rear door. I'm almost positive a 6 1/2" speaker will fit in the rear door despite what Crutchfield says. The stock ones were 6 1/2".

Have questions for
?

Perfect fit

Made for a great fit on the system upgrade.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

These fit both front and rear doors on my 2010 Forester. No issue mounting 6-3/4" speakers. Update your database as the ones you recommended for the rear doors didn't line up at all...

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Ships fast and fits

Have questions for
?

Easy install.

Have been installing my own sound systems for over 50 years. With the current products available from Crutchfield it is easier than ever to have a professional looking and great sounding system at a reasonable price.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Just ok have to modify to use with the speakers they came with.

Have questions for
?

Great Fit

Worked great to mount some new 3-way speakers in my 2004 Subaru forester

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Holes line up. Works as advertised. Had to bend up speaker terminals slightly to fit inside hole of 07 Forester.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

They fit and worked out well

Have questions for
?

Made installation easy!

Made for a perfect installation of my infinity kappa 62ix coaxials into my 2007 Subaru Forester

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

fit perfectly into my daughters car, saved me alot of time doing so.

Have questions for
?

Diagrams needed

Didn't come with any instructions or diagrams

Have questions for
?

Must Buy!

Made installing the speakers a breeze!

Have questions for
?

Fits 2015-18 Foresters

After a few weeks of searching I finally found the perfect product for my rear doors. I have a 2018 Subaru Forester XT Touring, on hear and everywhere else there is no product that works for this location. Perfect fit.

Have questions for
?

Easy

Fit once I realized the holes aren't symmetrical.

Have questions for
?

Great fir

Perfect fit

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Perfect. Works exactly how I needed them to work. Makes the installation much easier (and better).

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Works great! In the back of my subaru outback 2011 I had to crack off the inner ring but they worked fine.

Have questions for
?

Fits car slots, not speaker

As a universal adaptor, it works. It has the correct outside diameter and slots that match the screw holes in the car. The 6 1/2" speaker I used is slightly oversized compared to the factory fittment but Crutchfield indicates good fit. The factory housing this replaces was angled to point towards the listener - this does not. The bracket has tabs that allow it to work with 5 1/2" speakers so those get snapped off. The 8 holes around the perimeter have molded tubes so the provided screws will bite into and hold. These holes were not outboard enough for my speakers, so the speaker baskets needed to be slotted about .200" each hole. This plastic is soft enough to be easy to use so screw torque is light - started pulling though the plastic at about 10 inch-pounds. Supplied screws are long so they have to be trimmed to get the bracket to fit flat against the door panel. So, a little disappointed in the soft material, neutral angle, and mounting holes - but it did allow me to install my speakers using this as a base and modifying the speakers instead of creating a proper bracket from scratch.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

prefect fit and very easy to install

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Fit perfectly! thank you!

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

I believe these would've worked with most 6.5" speakers (they fit my mtx terminator 653s, but were not for them) but they were sent to adapt Rockford Fosgate R165x3, which Crutchfield listed as fitting like they're 6.75" so I had to cut off the normal tabs on the inside and screw new holes into the outer ring. So they worked for me with a bit of modification.

Have questions for
?

works well with some modifications

worked well in 2009 Outback. holes lined up with the door mounting holes. as far as mounting the speakers onto these adaptor rings and with most rings I would ignore the holes that some with these and instead line up the speaker so that you can fit the speed clips, install them, and screw into them instead. once you have a good orientation for the speaker and the clips are all snapped on go ahead and predrill small holes through the clips and screw in the speakers. those metal speed clips are going to hold better. the screws that come with new speakers are generally too long so either pick up some shorter screws or dremel off the ends of the screws to the whole assembly can sit flush with the door. finally drill a hole in the top side of the bracket so you can route the wire. the factory plug on the front doors is on the interior side of the door. this bracket does not have that hole predrilled. and don't forget your foam gaskets

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

Fit perfect although screws provided with kicker speakers didnt thread into the four holes very well at all.

Have questions for
?

Speaker adapters

Fit my 2010 Subaru Outback like Crutchfield said, Metra's website said it didn't. Needed to snap off all the mounts inside the main assembly which took a minute to figure out. Feels like decent material that will hold up. Now the down side, the mounting holes required some strange angles since they didn't line up with the holes in my Focal speakers very well. Also the website (Crutchfield and Metra) mentions it comes with 8 screws, the bag did not list them on the contents and it didn't come with them, so I had to use the Focal screws which were too long for this adapter, so the hang out of the bottom, but mounted my speakers at least. I would've simply gone to buy more appropriate screws if my car hadn't already been disassembled when I realized this. Other than this they do what their job is.

Have questions for
?

Perfect Accessories

jUST PERFECT

Have questions for
?

Great fit

These speaker brackets worked great in my 13' Subaru Legacy. They gave my kicker speakers the mounting surface they needed plus the door panels still fit perfectly.

Have questions for
?

Metra 82-8900 Speaker Mounting Brackets

work very well thank

Have questions for
?