About the Axxess XSVI-9005-NAV Wiring Interface
This Axxess XSVI-9005-NAV wiring interface lets you replace the factory radio in your 2005-11 Mercedes-Benz using the existing wiring and connectors. Connect the Axxess interface to your aftermarket radio, mount the module, and plug it into the existing factory plug. This interface provides the accessory power wire needed to connect an aftermarket stereo, along with all the connections required to install an aftermarket navigation receiver.
Also, once you turn off the ignition in your Mercedes-Benz, the radio continues to play until you open the door. This interface maintains that function with your new aftermarket radio. This interface is compatible with select 2005-11 Mercedes-Benz vehicles. The XSVI-9005-NAV includes a plug-in connector for the Axxess ASWC-1 steering wheel control adapter, making that installation a little easier.
If you haven't done so already, please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this item is compatible with your vehicle. Warranty: 1 year.
More details on the Axxess XSVI-9005-NAV Wiring Interface
Vehicle Compatibility: The Axxess Integrate XSVI-9005-NAV radio replacement interface module allows you to replace the factory radio in select 2005-up Mercedes vehicles (non-amplified factory system or when replacing amplified system) with an aftermarket head unit. Please consult the Crutchfield Car Selector to see if your vehicle and aftermarket head unit is compatible.
Note: The XSVI-9005-NAV interface is designed to be used in select Mercedes-Benz vehicles without a factory amplified sound system or when replacing the entire factory amplifier system. The XSVI-9005-NAV does not retain your vehicle's factory amplifiers.
+12V Accessory Output: There is no 12-volt accessory wire in the factory harness, which requires the installer to run an accessory wire to the fuse box or underneath the steering column when installing an aftermarket radio. The XSVI-9005-NAV is designed to provide a 12-volt, 10-amp switched accessory output (red wire).
Navigation Outputs: The XSVI-9005-NAV provides essential wires required for aftermarket radios that have navigation. VSS (Vehicle Speed Sense), Reverse, and Parking Brake wires are provided. This helps to cut down the installation time, since the installer does not have to look for these wires in the vehicle.
Retained Accessory Power (R.A.P.): The Retained Accessory Power (R.A.P.) function supplies power to the radio after the ignition is shut off until one of the front doors are opened. This function is retained by the XSVI-9005-NAV interface.
OEM Steering Wheel Control Compatible (optional): The XSVI-9005-NAV interface features a right-angle 3.5mm connector that lets you keep your vehicle's OEM steering wheel controls via the optional Axxess Steering Wheel Control Interface (120ASWC1, sold separately).
Color Codes: Wiring up the XSVI-9005-NAV is like wiring up any other wire harness that would attach to an aftermarket radio's harness. The Metra/EIA wire code can be found on the back of the interface's package that will aid you in the wiring of your aftermarket radio The XSVI-9005-NAV interface contains the following wire leads.
|Gray||Right Front +|
|Gray/Black||Right Front -|
|White||Left Front +|
|White/Black||Left Front -|
|Violet||Right Rear +|
|Violet/Black||Right Rear -|
|Green||Left Rear +|
|Green/Black||Left Rear -|
|Navigation||Blue/Pink||VSS (Vehicle Speed Sense)|
|Bright Green||Parking Brake|
3 questions already asked