Contact us
Close contact box

Metra DP-3002B Dash Kit

Install a new double-DIN radio in select 1999-02 full-size GM trucks and SUVs (Smooth Matte Black)

Item # 120DP3002B

You've got a great General Motors truck or SUV, but the design of the dashboard makes it impossible to...

Find what Fits your car

You've got a great General Motors truck or SUV, but the design of the dashboard makes it impossible to...

Item # 120DP3002B

Ships free

In stock
C$209.99

About the Metra DP-3002B Dash Kit

Metra DP-3002B

You've got a great General Motors truck or SUV, but the design of the dashboard makes it impossible to upgrade the factory radio. Finished in durable, scratch-resistant Matte Black, the Metra DP-3002B dash kit replaces the stock dash panel and allows you to install an new double-DIN (4" tall) receiver in the dash panel without losing access to the heating, ventilation, and air conditioning controls.

Metra DP-3002B

You've got a great General Motors truck or SUV, but the design of the dashboard makes it impossible to upgrade the factory radio. Finished in durable, scratch-resistant Matte Black, the Metra DP-3002B dash kit replaces the stock dash panel and allows you to install an new double-DIN (4" tall) receiver in the dash panel without losing access to the heating, ventilation, and air conditioning controls.

Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this kit is compatible with your vehicle. Warranty: 60 days.

READ LESS

What's in the box:

  • Dash-panel
  • 2 Brackets
  • 11 Clips
  • Installation Instructions
MFR #DP-3002B

Customer reviews

Loading reviews...

Metra DP-3002B Dash Kit reviews

Average review:

144 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Metra DP-3002B Dash Kit

Stacey B.

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
Old Chevy... There are so many double din options to choose from. This is a great way to update. [ C  Jul 04, 2019 ]
A
To upgrade single din factory stereo. [ Luke  Mar 01, 2019 ]
A
Because the people at GM decided to make it inconvenient to install a DDIN in a sierra/silverado. [ Scott  Feb 01, 2019 ]
A
recommended [ Bryan  Jan 29, 2019 ]
A
Chose because I didnt get a mounting bracket with my radio [ Thomas  Jan 17, 2019 ]
A
required to put touch screen [ jesus  Jan 14, 2019 ]
A
I needed this in item in order to change my factory radio to a new 7" display. [ Louis  Dec 29, 2018 ]
A
I require this for my head unit install into my vehicle [ Steve  Dec 28, 2018 ]
A
Crutchfield said I needed to order to complete the installation. [ Adam  Nov 24, 2018 ]
A
Recommended by you [ Alejandro  Oct 28, 2018 ]
A
Needed for easy installation in 02 Tahoe double din install [ JULIO  Oct 27, 2018 ]
A
Needed to put double din in vehicle [ Frank  Aug 22, 2018 ]
A
to allow the mounting of my Double Din sized Sony XAV-712HD head unit [ James  Aug 18, 2018 ]
A
Switch from single din to double din unit and I like it neat. Decent reviews and yes I'll be using the factory OEM clips. [ Vernon  Aug 15, 2018 ]
A
stated it was needed to correctly install radio [ MARLON  Aug 09, 2018 ]
A
Recommended set up [ Brook  Jun 20, 2018 ]
A
It was in the package. [ Rebecca  May 16, 2018 ]
A
So i could install the head unit I purchased. [ Dezertdog  Apr 13, 2018 ]
A
The only option when replacing the 3.5" DIN with a 4" DIN in 1999-2002 GM trucks & SUV's. Looks nice and fits well, and my interior is "graphite" so this is a perfect match in color. [ P  Mar 27, 2018 ]
A
Needed for install [ Klaus  Feb 08, 2018 ]
A
It's required for a double DIN head unit to fit in my vehicle. [ Michael  Jan 09, 2018 ]
A
Need it for the radio to fit [ ERIC J  Dec 17, 2017 ]
A
Came as part of install kit for my '99 Silverado(new body style). Hope it fits as nicely as advertised for a proper fit and to have new system up and running without any glitches [ Brian  Dec 13, 2017 ]
A
Recommended for the install by Crutchfield. [ Eric  Nov 19, 2017 ]
A
I have faith and trust in Crutchfield. I have never been unhappy with anything I've purchased here. [ Paul  Nov 19, 2017 ]
A
I tried to cut the old one to fit the new radio.......looked real bad!!! Spend the money and get one that's pre cut. [ Richard  Nov 16, 2017 ]
A
. . . have to have this for my double DIN install. I'll give more feedback once it's been installed. [ RICHARD  Oct 28, 2017 ]
A
I custom cut my dash before. I wanted to try something custom made for my vehicle. [ Badbowtie  Oct 24, 2017 ]
A
For DDin radio [ Michael  Oct 16, 2017 ]
A
I chose this dash kit because it was a great alternative to chopping up my current dash. I am able to live with having a black piece that doesn't match my stock interior because it was a much simpler option than the others. [ Ryan  Aug 16, 2017 ]
A
Recommend [ Bret  Jul 05, 2017 ]
A
comes with kit [ Robert  May 21, 2017 ]
A
With the best efforts, cutting the factory dash still looks bad and is permanent. This kit eliminates both. [ Duke  May 13, 2017 ]
A
I had not choice,,,, [ Tatum  Apr 27, 2017 ]
A
I choose this kit so I wouldn't have to cut my factory dash bezel! Plus I wouldn't have to rig up my unit up inside the hole. [ Garrett  Apr 06, 2017 ]
A
Made the finished job look factory [ Todd  Feb 25, 2017 ]
A
make custom install easy [ KEITH  Feb 14, 2017 ]
A
In order to fit the new radio head unit. [ Raymond  Jan 25, 2017 ]
A
I need it to install the stereo [ BROOKS  Jan 20, 2017 ]
A
Had to have to finish the job right [ Kevin BigDawg  Jan 08, 2017 ]
A
Needed it [ Gregory  Jan 02, 2017 ]
A
needed for installation [ Bradley  Dec 14, 2016 ]
A
Saved me a ton of time trying to modify existing dash for oversized radio. Fit isn't quite as good as I hoped but installation was effortless. [ Ted  Nov 29, 2016 ]
A
This is required to make the stereo selected fit the dash of my truck. And, recommended by Marshall, my advisor. [ MARK  Nov 29, 2016 ]
A
To convert to a double din [ William  Nov 26, 2016 ]
A
Allows my new double din Navigation/CD/DVD to be installed with the factory look. [ jackie  Oct 11, 2016 ]
A
Because the Head Unit I selected was a double DIN and it won't fit in to the factory dash bezel. [ John  Oct 06, 2016 ]
A
Recommended [ CHRIS  Sep 13, 2016 ]
A
Perfect fit. Eventhough its a different color, its not that noticeable. [ Andrew  Jul 11, 2016 ]
A
Needed to install a double din radio in my stock dash [ Mark  Jun 07, 2016 ]
A
Modified dash kit custom fit for my truck with the new receiver kenwood receiver is bigger than the factory radio you have to get it you may need to paint to match dash color comes flat black but fits good [ Guy russell  Jun 03, 2016 ]
A
Cannot install the radio without it. Not too mention the previous owner had hacked up the stock overlay from the last unit, and it looked like crap. [ Erik  Mar 13, 2016 ]
A
Recommend on your site [ Greg  Feb 07, 2016 ]
A
Needed a way to install a double din in my 99 GMC Sierra [ Jesse  Jan 18, 2016 ]
A
easy install [ ROBERT  Jan 15, 2016 ]
A
This is the only way to go unless you want to rig your OEM dash and look cheap. [ Adam  Jan 11, 2016 ]
SHOW MORESHOW LESS

11 questions already asked

Q
Has anyone use a carbon fiber wrap on this dash kit?
[ Mitch  Mar 22, 2019 ]
2 answers
A
no didn't try
[ Randall  Mar 23, 2019 ]
A
I used it on my 99 Silverado. Only wish it was color matched.
[ chris  Mar 22, 2019 ]
Q
Does this fit all screen sizes on a double din just got a 7 inch Kenwood dnx892 and want to make sure this will fit?
[ Jeff  Dec 29, 2018 ]
2 answers
A
The Kenwood DNX892 is actually slightly smaller than my application by ~.05 inch to 2/16 inch on each side. It will fit fine.
[ Addisababa I.  Dec 30, 2018 ]
A
I used this dash face with a Kenwood double din unit, but mine did not have a screen, just a large LED display. However, the opening should be large enough for a screen on a double din unit as long as there is some border around the screen.
[ Robert  Dec 29, 2018 ]
Q
Does the outer edge of the bezel have a leather grain texture like the factory bezel?
[ caymon  Apr 03, 2018 ]
5 answers
A
NO, THE OUTER EDGE IS PLAIN. The bezel looks great. I left the original black because the rest of the instruments were black in my truck and it blends in perfectly. You would never know this is a" after market " installation.
[ Lyle  Apr 03, 2018 ]
A
No just plan black plastic.
[ Richard  Apr 03, 2018 ]
A
No, it is just matte black plastic
[ Sam  Apr 03, 2018 ]
A
I purchased the kit over a year ago and it fits well. It is flat black and ready for paint. There is no trim detail on it.
[ Joseph  Apr 03, 2018 ]
A
No the whole bezel is smooth
[ Michael  Apr 03, 2018 ]
Q
My 2002 Yukon Denali has a Onstar Panel located on the right side of the Dash Panel under the air vent. The Onstar Panel is a small rectangle, much smaller than the opening in the picture on your replacement Dash Panel on your website (appears to be at least half the size in height). Is there an adapter for the Onstar Panel to make it fit in the larger cut out on the aftermarket bezel? Thanks for your help.
[ Tyler  Jan 10, 2018 ]
1 answer
A
I don't see any adapter being included for using with that OnStar panel. Also, I've looked through the information we have on this kit including the manual that comes with it. I don't see any mention of having OnStar panel there causing any issues or needing any extra parts which leads me to believe it won't require any extra parts to install. Also, I wanted to mention we don't have a way to keep OnStar working when the radio is replaced; not even if we use a single din radio so you don't have to use this kit. My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101
[ Paul  Jan 15, 2018 ]  Staff
Q
does the clear plastic come with the kit, or are we supposed to use old one ( mine is cracked and missing a piece in lower left corner??) Id like to find out before ordering
[ jim  Dec 13, 2017 ]
3 answers
A
no its just dash cover
[ SCOTT  Dec 17, 2017 ]
A
No, this is just the plastic that surrounds everything. It's a matte black finish, which is a nice contrast to the interior color. Works great for when you convert the radio to a double DIN unit. Mine was a really good fit, but you may want to use the factory clips as I believe they hold better than the ones provided in the kit. If you pop off your current factory plastic, that is exactly what you get to replace with this kit, nothing more.
[ KEN  Dec 15, 2017 ]
A
I don't understand your question I have a 2001 GMC 3500 and the piece that extends from above the radio down past the a/c control module pops off and you replace it with the new one. It was a perfect fit
[ JAMES  Dec 15, 2017 ]
Q
Do you have that in beige color?
[ Raman  Oct 28, 2017 ]
1 answer
A
Sorry, no. We only stock it in black.
[ Ryan  Oct 30, 2017 ]  Staff
Q
Will this dash fit my 2000 chevrolet silverado single cab truck ?
[ Gary  Oct 02, 2017 ]
1 answer
A
This is the recommended dash trim for a double DIN stereo install in the 2000 Chevy Silverado, yes. You'll also need a wiring harness and an antenna adapter. You can be sure to get all of the recommended installation accessories for your truck by using the "Find what Fits" application on our website here: https://www.crutchfield.com/car/carselector.aspx?lp=%2fCar%2foutfitmycar%2fmycar.aspx I hope that helps! My Bio: https://www.crutchfield.com/bio/Ryan
[ Ryan  Oct 04, 2017 ]  Staff
Q
I recently installed the Kenwood DPX501BT in a Chev Cobalt, the vehicle got totaled. Now I'm gonna installing it in my Silveradao 2000. Can the same wire hardness be used for this vehicle?
[ Dwayne  Mar 07, 2016 ]
1 answer
A
Thanks for your question. More information would be needed, for information I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget.
[ Kenny  Mar 07, 2016 ]  Staff
Q
Just for clarification, besides wiring, etc. Is there anything else I need to install a DDIN in my 2001 GMC Yukon Denali XL? I can just replace this bezel & good to go?
[ Dave  Feb 20, 2016 ]
1 answer
A
You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Kenny  Feb 20, 2016 ]  Staff
Q
Does this have a wood grain finish like my stock dash?
[ Fosgate1964  Jul 04, 2015 ]
7 answers
A
For all those who answered that this item has a black primer, you are wrong it is not a primer but rather a scratch resistant black "paint" finish more similar to powder coating. Also those that answered it is easily painted you are also wrong. I spent over an hour on the phone with Metra and SEM (auto interior paint supplier) to educate myself on the proper products and steps before painting this item. I finally gave up after 3 attempts. Each time I followed the directions I was given to the letter and I got wrinkles throughout the entire piece. Tried different primers, cleaners, and application methods with no success. Metra and SEM both told me it could easily be painted by just using the correct cleaner and then primer before painting. After wasting many hours of time sanding, cleaning, priming, painting only to repeat time after time it never worked. I found out, after 3 time consuming attempts, that the original paint must entirely be removed prior to any paint or primer application. If you are thinking I will just use a chemical stripper to remove all the Metra applied paint, think again. Of all the chemical paint strippers made, very few are safe for use on ABS plastic, and of the ones that are warn of structural damage making the ABS brittle. The only course of action to paint this item is to manually sand all the original paint off the part and start from there. In my opinion the factory finish looked perfectly acceptable on my dads charcoal interior, but stood out like a sore thumb on my pewter colored interior. Metra told me it could be painted just using the correct primer which was not true. The part was damaged going off the information supplied by the manufacturer and I feel like they should supply me another part. After calling Metra I was told "I am sorry your project didn't work out you should buy another and try again.
[ Kevin  Apr 10, 2017 ]
A
it has a little texture to it, but not like the factory. It's smoother. It's all black, and is paintable with the right kind of paint. I think duplicolor has the tan at most auto parts stores if that's your color.
[ Tgoatman  Jul 03, 2016 ]
A
No! It's has a black primer finish, you need to apply you own favorate finish
[ Patrick  Jul 07, 2015 ]
A
No. It comes black. You would need to paint it
[ Greg  Jul 06, 2015 ]
A
No, it came with a flat black finish. It looks nice on my Yukon 2002, but you coming from a wood grain finish might not be so happy about it.
[ Rigel  Jul 06, 2015 ]
A
No, it is a smooth flat black finish. It still looks good and fits well though.
[ Jesse  Jul 06, 2015 ]
A
My kit came with a black finish and I did not see an option for different finishes. I would chat with a rep and see if the offer others.
[ DEREK  Jul 05, 2015 ]
SHOW MORESHOW LESS

Loading articles...

TOP