About the Axxess AX-NIS24SWC-6V Steering Wheel Control Harness
Axxess' AX-NIS24SWC-6V adapter allows you to connect the steering wheel audio controls in select 2011-up Nissan vehicles to a new car stereo without having to splice into your factory wiring. To use this harness, you'll need the Axxess ASWC-1 steering wheel control interface (sold separately) and a compatible aftermarket radio. You'll also retain the factory backup camera and aux input when adding an aftermarket radio in your Nissan. The package includes the AX-CAM6V converter needed to supply power to the camera, plus a pre-wired harness that plugs into the ASWC-1. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to find out if this harness is compatible with your vehicle. Warranty: 1 year.
More details on the Axxess AX-NIS24SWC-6V Steering Wheel Control Harness
Vehicle compatibility: The Axxess Integrate AX-NIS24SWC-6V harness is compatible with select 2011-up Nissan vehicles that are equipped with factory navigation.
|Rogue (w Bose)||2012-2013|
Note: Not compatible with vehicles equipped with an "All Around Camera" system.
Retained Features: When installing an aftermarket radio in a 2016-up Nissan, the Axxess Integrate AX-NIS24SWC-6V harness allows you to retain the following factory features that are normally lost when removing the factory radio.
- Aux Input: The AX-NIS24SWC-6V includes stereo male RCA connectors that allow you to retain your factory installed 3.5mm jack (your aftermarket radio must also have a rear-panel stereo Aux input).
- Backup Camera: In addition, the AX-NIS24SWC-6V harness includes a composite video connector to allow you to retain your factory installed backup camera.
- Steering Wheel Controls (in Nissan Altima Only): The AX-NIS24SWC-6V harness allows you to retain your factory installed steering wheel controls without having to splice into your vehicle's factory wiring, using the Axxess Steering Wheel Control Interface (120ASWC1, sold separately).
Note: Additional kit and wiring harness will also be needed to complete installation.
Reverse Gear Output: The AX-NIS24SWC-6V provides a Reverse Gear output.
Wire Code Chart:
|Red||+12 Volt Accessory|
|Red||+6 Volt Camera Power|
|3.5mm Jack (male)||SWC output|
|Yellow Composite Video (male)||Backup camera input|
|White RCA (male)||Aux input (left)|
|Red RCA (male)||Aux input (right)|
|Blue/white||12V-to-6V converter Reverse|
|Blue/red||12V-to-6V converter Positive|
|Black (thin)||12V-to-6V converter Ground|
2 questions already asked