About the Pioneer TS-A300TW
Enjoy new details
Fight mushy sound with Pioneer's A-Series TS-A300TW 3/4" tweeters. The polyimide hard dome design ensures impressive detail and minimal distortion at high volume so you can finally enjoy your tunes the way they're meant to be heard. Inline crossovers channel the appropriate frequencies to these tweeters, and Pioneer includes versatile flush- and surface-mounting hardware so you can get them in the right spot to maximize the soundstage in your car.
- 3/4" polyimide hard dome tweeters (pair)
- flush- and surface-mount hardware included
- inline crossovers included
- handles up to 100 watts RMS (450 watts peak power)
- frequency response: 1,400-69,000 Hz
- sensitivity: 88 dB
- top-mount depth: 1/2"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # TS-A300TW
What's in the box:
- Two tweeters (with attached 10" speaker leads terminated with quick-connects)
- Two 40" Lengths of speaker wire with in-line crossovers (each has quick slides to connect to the tweeter on one end and bare wire on the other)
- 2 Angled surface mount housings
- 2 Flush mount rings
- 2 Factory mount brackets
- Six 1/2" Screws
- 2 Speed clips
- 2 Adhesive backed foam discs
- Specs on box
Pioneer TS-A300TW reviews
Good quality. Neither Pioneer nor Crutchfield addressed the need to splice these due to the female connector and wiring harness. However, tech support was really helpful.
0 of 0 found this helpful
great product they sound awesome
4 of 6 found this helpful
More details on the Pioneer TS-A300TW
Features & specs
|Tweeter Design||3/4" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||88|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||1400 - 69k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||100|
|Peak Power Handling (Watts)||450|
|Top-mount Depth (Inches)||0 9/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||1 11/16|
Tweeter Mounting: The system includes flush mount rings and angled surface mount housings for the tweeters. The angled surface mount housing positions the tweeters at approximately a 45° angle. Bendable brackets are also included for mounting the tweeters in factory locations. Once installed the tweeters do not swivel.
Tweeter Mounting Dimensions:
|Angled Surface Mount||Flush Mount|
|Mounting Depth||screw depth||0.552"|
Crossovers: The high pass crossovers are integrated into the included speaker wire. The slope is 6 dB/octave and the crossover point is 3.8 kHz. The capacitors (crossovers) are approximately ½" diameter x ¾" long. The quick slide terminals on the output end of the wire connect to the terminals on the wire attached to the tweeters.
Q Crutchfield asked: Why did you buy this?