About the Pioneer TS-A709
Don't overlook this little speaker
More and more automakers like Toyota, GM, and Chrysler equip their vehicles with 2-3/4" speakers in the dash, and Pioneer has the perfect upgrade. These Pioneer TS-A709 2-3/4" 2-way speakers flaunt surprising power-handling and solid construction. A carbon and mica-reinforced, injection-molded polypropylene woofer adds sturdiness to your sound while the polyetherimide tweeter steps up the detail. Pioneer includes inline high pass filters with high-quality capacitors to protect the speakers from any damage that lower frequencies can cause. Overall, you can look forward to more clarity from your tunes than with your factory speakers.
- 2-3/4" carbon and mica-reinforced injection-molded polypropylene midrange speakers
- polyetherimide dome tweeters
- inline crossovers
- handles up to 100 watts RMS (450 watts peak power)
- frequency response (using included inline crossover): 850-34,000 Hz
- sensitivity: 82 dB
- woofer top-mount depth: 1-5/16"
- grilles not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # TS-A709
What's in the box:
- Two 2-way speakers
- Two 10" lengths of speaker wire with in-line high pass crossover (female quick slides on one end and unterminated wire on the other)
- Warranty information
- Specs printed on box
More details on the Pioneer TS-A709
Features & specs
|Speaker Size||2 3/4|
|Tweeter Design||16mm Dome|
|Woofer Composition||Carbon and Mica reinforced IMP|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||82|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||850 - 34k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||100|
|Peak Power Handling (Watts)||450|
|Top-mount Depth (Inches)||1 5/16|
|Bottom-mount Depth (Inches)||1 3/8|
|Cutout Diameter or Length (inches)||2 3/8|
|Mounting Height (Inches)||0.219|
Overview: Pioneer describes the TS-A709 as a wide range speaker (as opposed to a full range speaker), designed to replace the 2¾" tweeter used by several vehicle manufacturers. Please enter your vehicle information to confirm fit.
Crossovers: A 6 dB/octave, 850 Hz high-pass crossover is integrated in-line with each included 10" length of speaker wire. The output end of the wire has quick slides that plug onto the speaker terminals; the input end of the wire is not terminated. At the widest point the crossovers measure just under ¾" across.
Power: The 100 watt RMS power rating is valid only when using the included crossovers.
Frequency Response: The published frequency response is 101 Hz to 34 kHz (-20 dB), but the -3 dB point on the included high pass crossover is 850 Hz. (The included crossover should always be used, unless the speakers are actively filtered.)