About the Pioneer TS-SW2002D2
A shallow-mount sub that rocks
A shallow-mount sub that rocks
Pioneer's TS Series shallow-mount subs bring great bass to vehicles where conventional subs won't fit. Their low profile allows the use of slender enclosures that'll fit behind a truck seat or any tight space while delivering the bass performance you need. The TS-SW2002D2 8" shallow-mount sub handles up to 150 watts RMS with a mounting depth of just 2-5/8".
Mica-injected molded resin cone
The TS-SW2002D2 features an oversized cone made of mica-injected molded resin that moves more air and delivers accurate bass. The dual 2-ohm voice coils allow you to wire the sub for 1- or 4-ohm impedance. The sub works best in a small sealed enclosure, making it ideal for those tight spaces in today's smaller vehicles. Pioneer recommends their UD-SW200D downfiring shallow subwoofer enclosure for use with this sub.
Need an amp for this sub? Check out this Crutchfield-approved bass package.
- 8" shallow subwoofer with dual 2-ohm voice coils
- mica-injected resin cone
- handles up to 150 watts RMS (600 watts peak power)
- works in free-air applications
- frequency response: 20-200 Hz
- sensitivity: 86 dB
- mounting depth: 2-5/8"
- box volume: 0.5 cubic feet
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # TS-SW2002D2
What's in the box:
- One 8" Pioneer shallow mount subwoofer
- Six 1-1/8" Self-tapping screws
- Adhesive backed foam gasket
- Manual (English/ French/ Spanish/ Portuguese)
- Warranty information
More details on the Pioneer TS-SW2002D2
Features & specs
|Impedance||1 ohm or 4 ohms|
|Cone Material||Mica-injected IMPP|
|Surround Material||Elastic Polymer|
|Ideal Sealed Box Volume (cubic feet)||0.5|
|Ideal Ported Box Volume (cubic feet)||0.5|
|Port diameter (inches)||3|
|Port length (inches)||10|
|Dual Voice Coil||Yes|
86 dB at 1 watt |
|Frequency Response||20 - 200 Hz|
|Max RMS Power Handling||150|
|Peak Power Handling (Watts)||600|
|Top Mount Depth (inches)||2 11/16|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||7|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Shallow Mount Woofer: Pioneer's Shallow-Mount subwoofers are designed to provide installation options for a broad range of vehicles. They can be mounted behind or under the seats of many vehicles. The TS-SW2002D2 has a Mica reinforced IMPP (Injection Molded Polypropylene) composite cone. The process of bonding reinforced pulp to the back of the cone improves its damping capability and eliminates excess vibration.
Dual 2-ohm Voice Coils: This woofer features two 2-ohm voice coils that offer wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 1-ohm load. When the voice coils are wired in series, the woofer presents a 4-ohm load.
Terminals: The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 10 gauge.
Sealed Box Volume: Sealed is the preferred enclosure type for theTS-SW2002D2. The sealed box sizes recommended by Pioneer range from 0.15 ft³ to 0.5 ft³; with 0.5 ft³ being the ideal size.
Vented Box Volume: The vented box sizes recommended by Pioneer range from 0.25ft³ to 0.5 ft³; within this range the ideal size is 0.5 ft³ with a single 3" diameter x 10" long port.
Bandpass Box Volume: The bandpass box sizes recommended by Pioneer range from 0.25 ft³ per chamber to 0.4 ft³ per chamber; within this range the ideal size is 0.4 ft³ per chamber. One 3" diameter x 6.5" long port should be used in an enclosure with 0.4 ft³ chambers.
Infinite-Baffle Operation: The woofer is also optimized for infinite-baffle operation (free-air) so that it can be installed in a variety of locations, including factory woofer applications, without the need for a dedicated enclosure.
Q Crutchfield asked: Why did you buy this?
26 questions already asked