About the JL Audio MX10IB3-CG-TB
Great bass for boaters
Great bass for boaters
JL Audio's MX10IB3-CG-TB 10" marine subwoofer reflects JL Audio's commitment to top-quality engineering and sound quality. The beautiful titanium finish and subtle "Classic" grille design make it a perfect match for many boat interiors.
Built for life on the water
Built from the ground up for the marine environment, this rugged sub sports a corrosion-resistant Centrex® polymer basket that surrounds the sub's internal structure for extra protection. The marine-grade synthetic fiber spider, injection-molded polypropylene cone, and synthetic rubber surround provide top performance, while shrugging off the corrosive effects of sun, salt, and moisture. The UV-resistant polymer basket encases and protects the entire structure, plus UV protection ensures that the grilles will look factory-fresh even after years of sun exposure.
Designed for a variety of enclosures
The subwoofer's motor structure allows extended cone movement, so you'll hear bass that's loud and low, yet precise and smooth. This versatile sub works in sealed enclosures, but it also works well in free-air applications, so you can mount it directly into a bulkhead if there's no space for a box.
- 10" 4-ohm marine subwoofer with titanium classic grille
- Centrex polymer basket and grille, with stainless steel back plate
- injection-molded mica-filled polypropylene woofer with synthetic rubber surround
- gold-plated, marine-grade brass binding posts
- marine-grade synthetic fiber spider
- works in sealed boxes and free air applications
- handles up to 175 watts RMS
- sensitivity: 87.2 dB
- top-mount depth: 5-1/8"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 91931
What's in the box:
- One 10" Marine subwoofer
- Titanium colored polymer grille (attached)
- Six 1-1/4" Stainless-steel philips-head screws
- 6 Stainless-steel flat-washers
- Owner's Manual
JL Audio MX10IB3-CG-TB reviews
Good product for the money. Looks good and sounds good. Perfect for a smaller boat or a starter system
0 of 0 found this helpful
More details on the JL Audio MX10IB3-CG-TB
Marine Tested: JL Audio's marine subwoofers go through ultraviolet testing chambers (to simulate years of sun exposure) and salt fog chambers (to simulate years of exposure to salt-water environments) and are built to withstand the rigors of marine use.
Woofer: The subwoofer features an injection-molded, mica-filled polypropylene cone woofer with a synthetic rubber surround specifically formulated for marine use.
DMA (Dynamic Motor Analysis): JL Audio's proprietary Dynamic Motor Analysis (DMA) technology results in ultra-linear motor force over a long range of excursion and a wide range of power inputs to reduce distortion and improve sound quality.
Infinite-Baffle Operation: The M10IB3 is optimized for infinite-baffle operation so that it can be installed in a variety of locations, without the need for a dedicated enclosure.
Polymer Basket And Grille: The polymer basket and grille are corrosion and UV-resistant, and the basket encapsulates the motor assembly to prevent corrosion.
Connections: The speaker terminals are 0.25" wide gold-plated, marine-grade brass, male quick slide connections.
Mounting Hardware: Marine-grade stainless-steel mounting screws and washers are included.
Box Type: If mounting in an enclosure, JL Audio recommends a 2.5 ft³ sealed box (2.0 ft³ minimum). The M10IB3 should not be mounted in a ported enclosure.
Grille: The woofer is shipped with the grille attached (using three screws). The grille can be removed, but the woofer can be installed without removing the grille. If the woofer is mounted without the grille, several measurements are different:
- Mounting Height: changes from 1.469" to 0.791"
- Flange Height: changes from 1.065" to 0.5"
- Frame Diameter: changes from 10.734" to 10.382"
Q Crutchfield asked: Why did you buy this?