About the JL Audio 10TW1-2
JL Audio applied all their design know-how to creating the 10TW1-2 subwoofer. This shallow-mount 10" sub works in very small enclosures and, with a mounting depth of only 4-3/8 inches, it'll fit in all kinds of tight places you don't expect a subwoofer to go.
Unique construction, built in the USA
The injection-molded mica-filled polypropylene cone with its rubber surround is housed in a specially designed cast-alloy frame that minimizes resonances. JL Audio builds this sub at their Florida factory, using their patented "concentric tube" design to compress the sub's motor structure for a smaller profile without sacrificing performance.
You can mount this sub right up against the back wall of your enclosure and it requires almost no clearance in front. If you're looking for a subwoofer that brings maximum boom to minimal space, you're looking in the right place.
- 10" 2-ohm subwoofer
- mica-filled polypropylene injection-molded cone with rubber surround
- cast-alloy frame
- power range: 75-300 watts RMS
- peak power handling: 600 watts
- top-mount depth: 4-3/8"
- sealed box volume: 0.35 cubic feet
- ported box volume: 0.625 cubic feet
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 92188
What's in the box:
- One 10" Thin-Line 2-ohm subwoofer
- Grille (installed)
- Owner's manual
- On-line product registration information
More details on the JL Audio 10TW1-2
Features & specs
|Cone Material||Mica-filled Polypropylene|
|Ideal Sealed Box Volume (cubic feet)||0.35|
|Ideal Ported Box Volume (cubic feet)||0.625|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||No|
82.5 dB at 1 watt |
|Frequency Response||26 - 200 Hz|
|Max RMS Power Handling||300|
|Peak Power Handling (Watts)||600|
|Top Mount Depth (inches)||4 3/8|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||9 1/16|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Thin-Line Design: JL Audio's patented thin-line woofer technology compresses the architecture of the 10TW1-2 subwoofer and allows it to deliver great bass performance in tight space applications (less than 4-3/8" deep). Central to the technology is the Concentric Tube structure that supports the oversized voice coil and the suspension attachments. This permits placing the motor structure much further forward in the speaker than conventional designs, while maintaining excellent linear excursion capability. Equally important, the 10TW1-2 is designed for extremely small enclosure applications (0.35 ft³ sealed and 0.625 ft³ ported) and there is no pole vent, so no space is needed between the woofer and the back of the enclosure.
Concentric Tube Suspension: JL Audio's patented Concentric Tube Suspension employs a molded structure which spans beyond the edge of the motor structure, supporting the spider on the outside of the motor's boundaries and the large diameter voice coil on the inside. The large voice coil permits the magnet to sit inside it, rather than surrounding the coil as is typical in most woofers. The concentric tube structure and the elimination of a conventional top-plate helps JL Audio place the motor higher up into the cone body's space to further compress depth, while still permitting excellent mechanical excursion.
Mica-Filled Polypropylene Woofer: The subwoofer features an injection-molded, mica-filled polypropylene cone with a rubber surround for added durability, excursion and bass response.
Dynamic Motor Analysis (DMA): DMA is JL Audio's proprietary method of improving dynamic motor behavior. As a result of DMA optimization, the 10TW1-2 motor remains linear over a long excursion range, and also maintains a stable fixed magnetic field in the gap over a wide power range. The result is reduced distortion, faithfully reproduced transients, and tight, articulate bass.
Floating Cone Attachment Method (FCAM): JL Audio's patented FCAM technology is an innovative method of bonding the surround/cone assembly to the voice coil/spider assembly. This assembly technique ensures proper surround geometry in the assembled speaker for better excursion control and dynamic voice coil alignment.
Sealed Box Volume: JL Audio recommends a sealed box volume of 0.35 ft³. A diagram is provided in the owner's manual for a sealed box with external dimensions of 16-1/8" W x 14" H x 5-1/4" D, assuming 3/4" thick material. (If you are using 5/8" thick materials, subtract 1/4" from each dimension.)
Ported Box Volume: JL Audio recommends a ported box volume of 0.625 ft³. A diagram is provided in the owner's manual for a ported box with external dimensions of 26-5/8" W x 16" H x 5-1/4" D, assuming 3/4" thick material. (If you are using 5/8" thick materials, subtract 1/4" from each dimension.) A slot port is recommended with the following dimensions:
- Slot Width: 3-3/4"
- Slot Height: 1-7/8"
- Slot Length: 22-1/2"
11 questions already asked