Contact us
Close contact box

JL Audio HO110-W6v3

Ported H.O. Wedge™ enclosure with one 10" W6v3 subwoofer

Item #: 13693310

The "H.O." in JL Audio's H.O.

The "H.O." in JL Audio's H.O.

Item # 13693310

Ships from distributor

Out of Stock
C$1,129.99
Add to wishlist

About the JL Audio HO110-W6v3

JL Audio Built In USAHigh-powered sub in a High Output enclosure

The "H.O." in JL Audio's H.O. Wedge enclosed subwoofer systems stands for "High Output," and that's exactly what you'll hear and feel. High Output Wedges deliver efficient, accurate bass, with better sound quality than conventional ported and bandpass boxes. The woofer sits in recessed baffle, part of a separate chamber within the enclosure, and the front-firing port output combines with woofer output for extremely efficient performance.

JL Audio Built In USA High-powered sub in a High Output enclosure

The "H.O." in JL Audio's H.O. Wedge enclosed subwoofer systems stands for "High Output," and that's exactly what you'll hear and feel. High Output Wedges deliver efficient, accurate bass, with better sound quality than conventional ported and bandpass boxes. The woofer sits in recessed baffle, part of a separate chamber within the enclosure, and the front-firing port output combines with woofer output for extremely efficient performance.

JL Audio HO110-W6v3

The port provides air flow for high output, while also making the enclosure stronger.

This HO110-W6v3 enclosure hosts a powerful 10" W6v3 subwoofer, and its 2-ohm impedance makes it a great match for a powerful mono amplifier. JL Audio designed the enclosure as a perfect mate for the sub so you can count on maximum performance.

Hand finished by JL Audio

JL Audio employs advanced woodcutting machinery to fabricate these enclosures, which are finished by hand at their facility in Florida. The compact design saves precious cargo space, while strong internal bracing and the recessed 1" thick mounting baffle maintain the enclosure's integrity and protect the sub.

READ LESS

Product highlights:

  • ported enclosure with one 10" W6v3 subwoofer
  • 5/8" medium density fiberboard construction covered with gray carpet
  • 2-ohm total impedance
  • power handling: 200-600 watts RMS (1,200 watts peak power)
  • frequency response: 22-200 Hz
  • sensitivity: 82.7 dB
  • 12-1/2"W x 14"H x 21-3/4"D
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # 93310
KEEP READINGREAD LESS

What's in the box:

  • Ported high output enclosure with one 10" 10W6v3 subwoofer installed
  • Warranty information

Customer reviews

Loading reviews...

JL Audio HO110-W6v3 Reviews

Average Customer Review(s):

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the JL Audio HO110-W6v3

Pat M.

Features & specs

General
Woofer Size (inches) 10
Speakers Per Box 1
Woofer Material Mineral-fill IMPP
Enclosure Type Ported
Color Gray
Pieces in System 1
Width (inches) 12-3/8
Height (inches) 14-1/8
Depth (inches) 21-5/8
Second Depth (inches) N/A
Connector Type 5-way post
Frequency Response 22-200 Hz
Power Range (Watts RMS) 600
Maximum Wattage 1200
Sensitivity 83 dB
Impedance 2 ohms
Parts Warranty 2 Years
Labor Warranty 2 Years

Product Research

Features

H.O. Wedge Enclosure: The HO110-W6v3 enclosure is designed around JL Audio's 10W6v3 subwoofer, using V-groove MDF construction with internal bracing to ensure structural integrity. The patented, chamber-coupled port design wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the driver. The woofer's dual 4Ω voice coils are internally wired in parallel to present a 2Ω load.

Terminal: The enclosure features a pair of 5-way binding posts; they will accept pin connectors, spade connectors, single banana plugs, dual banana plugs (standard 3/4" width), and bare wire up to 10 gauge.

Enclosure Dimensions:

  • Width: 12-3/8"
  • Height: 14-1/8"
  • Depth: 21-5/8"

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
previous subwoofer was stolen and am heartbroken. [ RICHARD  Nov 16, 2018 ]
A
Build quality, sound quality, overall performance. [ Chris  Nov 07, 2018 ]
A
I heard JL Audio subs and the sound quality is there. [ Jason  Oct 14, 2018 ]
A
It's the best [ Michael  Aug 26, 2018 ]
A
Works for my jl 900/5 [ Bryan  Apr 06, 2018 ]
A
JL Audio delivers an amazing subwoofer in a box custom made for it! This delivers, crisp, clean sound that packs a punch. [ Brandon  Nov 27, 2017 ]
A
This subwoofer has excellent reviews and I know it will be quality because it bears the JL Audio name. I like that this purchase comes with the subwoofer installed in a nice ported box, which means I don't have to search for the correct size box to purchase separately. I have limited trunk space but I wanted a sub that can still thump my brains out, and this 10" combo from JL Audio will do just that. [ Oliver  Jul 25, 2017 ]
A
Reviews and the technical data put on the crutchfield site [ jason  May 02, 2017 ]
A
bass pounding [ Nicholas  Mar 21, 2017 ]
A
I've used JL Audio in the past and was very pleased .. so I decided to try again. Once again I'm very pleased! I drive heavy haul big trucks... this fits perfect under my bunk in sleeper and rocks for hours not stop with no issue! Only complaint is that I should have gone with sealed box because I like more rock music and the ported box doesn't produce as tight a bass note in some of the songs. [ SEAN  Mar 11, 2017 ]
A
Needed something that saves space, but packs a punch [ Anthony  Jan 06, 2017 ]
A
the name. also because of all the positive reviews. [ gilbert  Dec 04, 2016 ]
A
I wanted the best and JL can provide that! Especially with this talked up W6v3. I'm very excited to see how this performs. [ Gary  Dec 01, 2016 ]
A
JL Audio has a solid reputation for not only sound quality, but also build quality. For just a bit more than the cost of the just the woofer, this item is pre-installed in a box that the manufacturer designed and tuned specifically for maximum performance. [ Daniel  Nov 08, 2016 ]
A
Brand reputation and size. A little on the expensive side though. [ ABELARDO  Oct 12, 2016 ]
A
Made in the usa! Its pretty compact for a ported box and from what I read / been told it's supposed to be super clean and super powerful but we'll see. I also think it looks pretty cool and hope its one of the "you get what you pay for" situations because its a bit pricey.. [ David  Sep 12, 2016 ]
A
I am always shopping for the best price and quality. [ Lamont  Aug 01, 2016 ]
A
It's a W6. Need I say more lol [ John  May 13, 2016 ]
A
Big fan of JL. Great subwoofer and box combination. [ Grayson  Mar 10, 2016 ]
A
I HAVE OWNED JL AUDIO SUBS FOR OVER 21 YEARS. I HAVE BEEN A HUGE FAN EVER SINCE. I ORIGINALLY HAD THE FIRST W6 SUBS BACK IN THE DAY. REPLACED THEM WITH W3'S OVER THE YEARS. NOW SPACE IS A FACTOR, SO I WANTED TO GO WITH THIS SETUP TO MATCH WITH MY HD 900/5 AMP. JL AUDIO HAS NEVER LET ME DOWN YET. [ CHRIS  Dec 26, 2015 ]
A
Size [ Brian  Dec 14, 2015 ]
SHOW MORESHOW LESS

12 questions already asked

Q
Will this fit under the back seat of a truck?
[ S  Sep 29, 2018 ]
1 answer
A
At 14" tall, it's not likely to fit under a seat, no. The complete enclosure dimensions are: 12-1/2"W x 14"H x 21-3/4"D If you like JL Audio subs, you should check out their "MicroSub" enclosed models for tight spaces: https://www.crutchfield.com/shopsearch/jl_audio_microsub.html
[ Ryan  Oct 04, 2018 ]  Staff
Q
Weight?
[ hometheaterguy1  Sep 10, 2018 ]
1 answer
A
The Net Weight is: 47.8 lb / 21.7 kg
[ Ryan  Sep 17, 2018 ]  Staff
Q
Will the ACM-1.300, (Audio Control 300 watts × 1@2ohm ) be enough to power this?
[ hometheaterguy1  Sep 06, 2018 ]
4 answers
A
It should. However, I just went from 300 watts to 500 watts of power to this speaker and it made a significant difference in sound quality and bass production. Hope this helps.
[ Armen  Sep 06, 2018 ]
A
It will power it, but it won't have full bass. Waste of money on the sub if you're not going to use its full potential.
[ Anthony  Sep 06, 2018 ]
A
Absolutely not. Thats like putting a ford engine in a ferrari. This JL sounds sweet and needs the power to push it, clean power to push it. You want at least a clean 600 TRUE WATTS to utilize this high output sub. I have 1000 watts on it and it handles it like a champ.
[ michael  Sep 06, 2018 ]
A
Itll move it but really not enough power for that sub. You need a clean 500 or 600 watts RMS
[ Ricky  Sep 06, 2018 ]
Q
What is the best amp to run with the JL w6v3 10" for it to beat hard without blowing it??
[ Dalton  Jan 21, 2018 ]
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
[ Krissy  Jan 22, 2018 ]  Staff
Q
anybody running this sub with a XD 700/5 or XD 500/3 which is 300 watts at 2 ohm on the mono channel , is it running this sub ok?
[ Scott  Oct 25, 2017 ]
1 answer
A
I have it set up with similar power and that's perfect either one of those. Face speaker 6 or more inches away from side panel and it sounds awesome. Good luck.
[ Hector  Oct 26, 2017 ]
Q
Can this box be laid on its side? The 14" height would be close, bit the 12.5" would fit with no issues.
[ Daniel  Sep 18, 2017 ]
4 answers
A
This sub is amazing, beautiful to look at, pleasure to lesten to It can be placed in any angle, currently on its side and it rocks the heck out of my car. Facing rear or forward this thing sounds the same to me.
[ Elvis  Sep 18, 2017 ]
A
Mine is on its side with no issues.
[ Frank  Sep 18, 2017 ]
A
Yea you can lay it any way you want. Also test with the speaker facing towards the rear of the car and with the face firing towards the front of the car as well as sideways. The port and design is made to lay any way you need and still sound solid. Just don't block the face of the speaker that is where the air port is and it needs space for the air to push out freely and not bounce back off a wall back to the face of the speaker.
[ michael  Sep 18, 2017 ]
A
Yes, I have it laid on its side for the same reason. The speaker terminals will be on the top side (and a little hard to access), but you can attach the speaker wires before you put it in the trunk.
[ Connor  Sep 18, 2017 ]
Q
I want a matching manufacturer amplifier does anyone have any suggestions that will provide the best out put for hours?
[ Abram  Jul 19, 2017 ]
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
[ Kenny  Jul 19, 2017 ]  Staff
Q
For those who put in a trunk, does this sound ok facing left or right against the back seat, or will it sound better with the woofer and port side facing the back of the trunk?
[ John  Jun 15, 2016 ]
6 answers
A
John; I have my facing the wheel weld which is double Fat_matted and it sounds great! My entire trunk is matted for isolation from road noise and proper dampening.This unit has outstanding sound quality and "awesome" deep bass! I would be concerned about positioning in the direction of a license tag since it will surely rattle. Toward the seat is also not a dampened sound enhancing surface.
[ Gary  Jun 21, 2016 ]
A
I had mine facing the passenger side of the trunk. Sounded just fine and took up less floor space when pushed directly up against the rear seats.
[ Grayson  Jun 16, 2016 ]
A
In all of my experience with this situation it would be better facing towards the rear, the sub will still sound just fine facing other directions however it will not achieve it's full db potential....hope this helps.
[ JASON M  Jun 16, 2016 ]
A
I've had it facing both left and right and it does sound good in both directions, however, it really shines with the port facing the back of the trunk. It's extremely loud for just a single 10 inch subwoofer and will play just about any type of music very well. Be sure to get the crossover points just right. I filter out anything below 33 Hz and anything above 65 Hz . It truly is a beast. I've had mine for 3 years now and couldn't be happier.
[ MICHAEL C  Jun 15, 2016 ]
A
It did not matter which direction I turned the sub because I I had my old subwoofer removed from my back deck and the ho110-w6v3 emits its tones through the sub hole and it sounds fantastic. When the sub was installed on the deck there was a slight delay in the sound due to sub having to go through back seat now there is no delay. You will love the effect if you do decide to buy. Good Luck Greg Langhorne
[ Gregory  Jun 15, 2016 ]
A
I had it in my trunk and it didn't seem to make a big difference where I placed it - great sound no matter what. I'd suggest just moving it around and see for yourself.
[ Nicole  Jun 15, 2016 ]
Q
Weight?
[ Dave  Jun 11, 2016 ]
1 answer
A
Thanks for your question. The weight is listed as 56 lbs.
[ Kenny  Jun 11, 2016 ]  Staff
Q
While the frequency response shows 22-200 hertz, I believe that's the 3db down of the driver. Does anyone know the actual tuning frequency of the enclosure/port?
[ John  Nov 30, 2015 ]
1 answer
A
Unfortunately we don't have that information listed in our product research and JL doesn't provide it in the owner's manual either. You may want to contact JL Audio directly at 954-443-1100 for more information.
[ Larry  Dec 03, 2015 ]  Staff
Q
Good day!! I would like to know what would be the best amplifier that can handle hours of performance without over heating? Also I would like that amplifier to be as small as possible.
[ Prentis  Dec 03, 2014 ]
5 answers
A
My top pick is the Alpine MRV-M500. That is what I am using. It is a very compact amp (only about 8x8x2 inches), it is at least 500W RMS (the certificate on mine stated 536W RMS x 1 @ 2ohm & 14.4V), and it can handle hours on end without over heating. I played mine for a 3-hour trip cranked up fairly loud non-stop with no issues. Hope this helps!
[ Nicole  Dec 08, 2014 ]
A
Alpine PDX-M6
[ Kenneth  Dec 07, 2014 ]
A
NVX makes a great line of amps that would do the job, and not break the pocketbook. I am using the JAD900.5 and it slams, and is only warm to the touch.
[ Ronald  Dec 05, 2014 ]
A
I haven't found the perfect amp for this sub yet but i just ordered a JBL MS-A5001 which has been discontinued but can still be found available. It has a small footprint and is rated for 500 wattts RMS @ 2 ohm but many people say they actually get around 750 watts RMS @ 2 ohm which should be ideal for this sub. hope that helps a bit.
[ NICHOLAS  Dec 04, 2014 ]
A
I personally don't prefer kicker speakers or subs, but they make pretty solid amps i paired my w6 with a cx600.1 and i couldn't be happier its very small and i haven't had a problem with over heating yet. If you have the extra money jl makes a amp that i was also looking at but the only noticable difference i could find was that the jl went about 3hz lower but in my opinion that did not justify the extra 200 dollars.
[ Graham  Dec 04, 2014 ]
Q
Should the terminal cup be on the left side for 10" version? I received a box with the terminals on the right where JL logo should be..
[ Audio  Jul 07, 2014 ]
4 answers
A
On the HO110-W6V3 I received the terminal cup was on the left side with the JL logo on the right.
[ George  Jul 08, 2014 ]
A
The terminal cup is on the right side for the 10" version.
[ Christopher  Jul 08, 2014 ]
A
The terminals on my 10" version are on the right side too. In my case, they are where I need them. I know the picture shows something different!!!
[ Marcelo  Jul 08, 2014 ]
A
Mine was also on the right
[ Graham  Jul 08, 2014 ]
SHOW MORESHOW LESS

Loading articles...

TOP