Contact us
Close contact box

JL Audio ACP110LG-TW1

MicroSub+™ single 10" powered subwoofer

Item # 13693332

JL Audio's ACP110LG-TW1 MicroSub+ powered subwoofer delivers the impressive bass you expect from JL Audio without...

JL Audio's ACP110LG-TW1 MicroSub+ powered subwoofer delivers the impressive bass you expect from JL Audio without...

Item # 13693332

Ships from distributor

In Stock
C$799.99
Add to wishlist

About the JL Audio ACP110LG-TW1

JL Audio Built In USAEngineered for performance

JL Audio's ACP110LG-TW1 MicroSub+ powered subwoofer delivers the impressive bass you expect from JL Audio without taking up a lot of space. The compact MicroSub+ enclosure houses a built-in Class D amplifier that safely sends 400 watts RMS to the specially engineered, ultra-low impedance TW1 10" subwoofer.

JL Audio Built In USA Engineered for performance

JL Audio's ACP110LG-TW1 MicroSub+ powered subwoofer delivers the impressive bass you expect from JL Audio without taking up a lot of space. The compact MicroSub+ enclosure houses a built-in Class D amplifier that safely sends 400 watts RMS to the specially engineered, ultra-low impedance TW1 10" subwoofer.

Made in USA

JL Audio uses state-of-the-art automated woodworking equipment to fabricate the high-quality MDF enclosure with rugged automotive carpeting, a steel-mesh grille, 5-way binding posts, and solid internal wiring. The enclosure and subwoofer are constructed at the manufacturing facility in Florida to ensure that you get the bass that you expect from JL Audio.

Small enclosure, big sound

The specially designed, slot-ported enclosure measures just over 5 inches thick, so it'll fit just about anywhere. Its flared slot-port design cuts down on air turbulence and keeps your bass rich and clear. You'll enjoy thick low-frequency response from all of your music with this capable enclosure in your vehicle. And you can easily remove the power connector from this sub, so you can pull it out of your vehicle when you need a little extra space.

READ LESS

Product highlights:

  • 10" subwoofer in ported enclosure
  • woofer impedance: 0.25 ohms
  • built-in Class D amplifier delivers 400 watts RMS at 0.25 ohms
  • recommended power/ground wiring gauge: 8 AWG
  • fuse rating: 30 A
  • dimensions: 21"W x 13-1/2"H x 6-5/8"D
  • weight: 25 lbs.
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # 93332
KEEP READINGREAD LESS

What's in the box:

  • MicroSub+ enclosure (loaded with one 10TW1-0.25 subwoofer and built-in amplifier)
  • Black metal grille (installed)
  • Power connection plug (installed)
  • 30-amp ATO fuse (installed)
  • 12" Speaker level r input harness
  • Owner's manual
  • Specification card
  • Warranty information

Customer reviews

Loading reviews...

JL Audio ACP110LG-TW1 Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the JL Audio ACP110LG-TW1

Pat M.

Features & specs

General
Enclosure Type Ported
Finish Material Carpet
Grille Steel
Connector Type RCA/Set screw
Bi-amp Inputs No
Woofer Size (inches) 10
Woofer Material Mica-filled Poly
Passive Radiator ---
Width 21"
Height 13-1/2"
Depth 7-3/8"
Second Depth N/A
Parts Warranty 2 Years
Labor Warranty 2 Years
Specifications
Frequency Response N/A
Amplifier Power (RMS) 400 watts
Maximum Wattage N/A
Sensitivity N/A
Impedance 0.25 ohms
Second Voice Coil Impedance N/A
Crossover Point 50-200

Product Research

Features

Overview: The ACP110LG-TW1 MicroSub+ is a compact powered subwoofer, useful in vehicles with limited space. The ported enclosure is loaded with one 10TW1-0.25 10" low impedance subwoofer (0.25Ω) and a 400 watt RMS class-D amplifier. The amp uses JL Audio's exclusive DCD amplifier technology, combining direct power conversion (no conventional switching power supply) with an ultra-high current output section. The result is an efficient design (91-94%) with very little heat generated.

Enclosure Design: The enclosure features MDF (medium-density fiberboard), constructed using CNC woodworking equipment, and covered with high-grade automotive carpeting. The driver is protected by a black steel-mesh grille. The port and amplifier panel are both on the same side of the enclosure.

Flared Port: The enclosure has a side-firing flared slot-port. The flared slot-port design minimizes turbulence and improves fidelity. The port is approximately 2-1/4" x 5-3/8" at the opening.

Power/Ground Plug: The power, ground, and remote turn-on wires attach to a removable terminal block; easily unplugged so the subwoofer can be removed when you need more storage space. Each terminal is a screw clamp that will accept up to 8 gauge wire (minimum 8 gauge power and ground recommend).

Audio Inputs: The amplifier section will accept either a line level (RCA) or speaker level signal. A 12" speaker level input harness is included.

Remote Level Control: An optional RBC-1 wired Remote Bass Control (item number 136RBC1, sold separately) allows bass level adjustment from the front of your vehicle.

Controls:

  • Input Sensitivity: rotary control; variable from 70 mV to 1.4 V for the RCA inputs and 280 mV to 5.4 V for the speaker level inputs
  • Turn-On Mode: three position switch:
    • REM: amp turns on when +12 volts DC is applied to the remote terminal
    • DC: the amp turns on when a DC offset voltage is detected on the speaker level inputs
    • Signal: the amp turns on when an audio signal is detected on the speaker level inputs, turns off after 30 seconds without an input signal
  • Crossover: rotary control; the crossover point is continuously variable from 50 Hz to 200 Hz; the slope is 12 dB/octave and the low-pass crossover is always engaged
  • Polarity: two position switch; allows you to reverse the phase of the subwoofer (0°, 180°)

Protection Circuit: The amp is equipped with thermal protection circuit; it will shut down if it overheats.

Dimensions:

  • Width: 21" (21-1/4" including wiring)
  • Height: 13-1/2"
  • Depth: 6-5/8" (7-3/8" including grille)

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
This is my 3rd JL Box. I love them! [ Christopher  Mar 08, 2019 ]
A
Great reviews and limited space in my truck. [ Joshua  Sep 28, 2018 ]
A
Compact, great review tight mid bass response and a good low end,and made in USA [ Stuart  Jul 08, 2018 ]
A
love everything JL Audio makes. This compact sub fits right and rocks for the size. You get what you pay for! [ JAMES  Nov 11, 2017 ]
A
I have a small space for the sub to fit in. I want great quality sound that JL is known for without giving up a lot of space. This product fits the bill perfectly. [ Kevin  Oct 17, 2017 ]
A
I chose this powered subwoofer based on the reviews, the output, and the flexibility of installation and removal. The ported box does not compliment my taste in music, and am returning and purchasing a sealed system instead. Do not discount this sub for it's size, it puts out for a 10". [ Justin  Apr 11, 2017 ]
A
Jl is awesome! [ Adam  Nov 06, 2016 ]
A
Good price. Included amplifier. Fits under seat in vehicle. [ Clay T.  Dec 17, 2015 ]
SHOW MORESHOW LESS

8 questions already asked

Q
I just need the kit that comes whit this one,how can I get it or buy it?
[ Hector  Jun 25, 2018 ]
1 answer
A
Put amp wiring kit in the search bar. Take you right to the source.
[ Benjamin  Jun 25, 2018 ]
Q
Will this fit under the passenger seat of a 2016 rx350?
[ michael  Mar 21, 2018 ]
1 answer
A
We do not have the available space dimensions under the passenger's seat in your vehicle. We do provide the dimensions of the enclosure (21"W x 13-1/2"H x 6-5/8"D) which you can use to cross-reference against the space you find there.
[ Ryan  Apr 04, 2018 ]  Staff
Q
Does this item have gain controls available?
[ John  Nov 07, 2017 ]
2 answers
A
Yes, there is an easily accessible gain control on the side panel.
[ Kanoa  Nov 07, 2017 ]
A
Yes, it has gain control, low pass filter on the side of the box. I highly recommend purchasing the optional JL audio level control that allows you to control the sub level from the drivers seat if you are adding it to a factory system.
[ Jack  Nov 07, 2017 ]
Q
Will this fit my gmc 1500 sierra denali with bose system?
[ James  Jul 18, 2017 ]
1 answer
A
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Kenny  Jul 18, 2017 ]  Staff
Q
Will this fit behind the rear seat in a 2017 Ford f350 supercrew? I measured and it looks like it will. Has anyone actually tried it?
[ Whit  Mar 06, 2017 ]
1 answer
A
I'm afraid we don't have enough information available on your 2017 F-350 at this time to fully determine fit with the JL Audio ACP110LG-TW1 behind the rear seats; however the sub itself measures 21"W x 13-1/2"H x 6-5/8"D (7-3/8" D including grille). If you don't receive any customer replies from other '17 F-350 owners, please feel free to contact an Advisor directly by phone (1-800-324-9695) or online chat to discuss further.
[ Larry  Mar 14, 2017 ]  Staff
Q
Will this fit under the front seat of a ford excursion?
[ josh  Feb 19, 2017 ]
2 answers
A
No it's bigger than that area.
[ Paul  Feb 20, 2017 ]
A
I doubt it unless you have some kind of modified seat bracket. I have one under the back bench seat in my silverado. The box barely fits on one side.
[ Mike  Feb 19, 2017 ]
Q
If adding subwoofer to 2014 Subaru Forester Harman Kardon stock system, what will have better bass, the JL Audio ACP110LG-TW1 or Bazooka BTA 10100?
[ jason  May 24, 2016 ]
1 answer
A
Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget.
[ Kenny  May 24, 2016 ]  Staff
Q
Will this fit under my 2008 GMC Sierra seat?
[ Josh  Mar 12, 2016 ]
1 answer
A
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Kenny  Mar 12, 2016 ]  Staff
SHOW MORESHOW LESS

Loading articles...

TOP