About the JL Audio MMR-20-BE
Control your MediaMaster from anywhere on your boat
This water-resistant wired remote works with your JL Audio MediaMaster marine receiver and allows you to control your music from a remote location on your boat. The package does not include the cable you need to connect the remote to your marine radio — you'll need either a 6-foot or 25-foot JL Audio marine extension cable.
- works with JL Audio MediaMaster marine receivers
- remote cables sold separately
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 99921
What's in the box:
- Marine wired remote (attached 10" cable)
- Mounting bracket
- Rubber gasket (pre-installed)
- Self-adhesive gasket
- 2 Threaded bolts
- 4 Hex-nuts
- 4 Washers
More details on the JL Audio MMR-20-BE
Compatibility: The JL Audio MMR-20-BE wired remote controller is designed specifically for JL Audio's MediaMaster MM100S BE marine source unit (13699920, sold separately). You will need a 6' or 25' wired remote extension cable (13699914 / 13699905; both sold separately). The MMR-20-BE remote can be installed up to 75' away from the MM100S source unit.
IP67 Water-Resistance Rating: The MMR-20-BE wired remote controller has been tested to withstand immersion in water, up to 1 meter (3.28 ft.) deep, for up to 30 minutes (when properly installed). While designed to be water-resistant, the MMR-20-BE should never be submerged under water for prolonged periods or subjected to activity that creates pressure on it that exceeds its depth rating.
Expandable: You can install up to three MMR-20-BE wired remote controllers to one MediaMaster MM100S BE marine source unit. A Y-splitter (13699908, sold separately) will be required to add more than one remote control. Each remote must be installed within 75' of the MM100S source unit.
Backlit Controls: Large, backlit controls and source indicators are easy-to-see and easy-to-use, day or night.
- Power On/Off
- Source Select (AM/FM, USB, Bluetooth, Aux)
- Volume Up/Down
- Mute/Un-Mute (AM/FM, Aux)
- Play/Pause (for USB & Bluetooth)
- Previous/Next Track (for USB & Bluetooth)
- Fast Forward/Rewind (USB)
- Preset Up/Down (AM/FM)
Mounting Options: The JL Audio MMR-20-BE wired remote controller is designed to be flush mounted into the bulk-head of your boat, watercraft, or vessel. The wired remote requires a round cut-out. The included mounting bracket and hardware secure the remote to the mounting surface. A rubber gasket is sandwiched in between the wired remote and the mounting surface.
- Cutout Dimensions: 2.0" (diameter) x 1.625" (deep)
- Front-Panel Dimensions: 2.375" (diameter) x 0.6875" (deep)
- Overall Dimensions: 2.375" (diameter) x 2.1875" (deep)
Note: The included hardware accommodates installations in flat panels up to 1.5" (38mm) thick.
Q Crutchfield asked: Why did you buy this?
3 questions already asked