About the JL Audio C3-570
Versatile speaker system for any space
Versatile speaker system for any space
JL Audio's Evolution C3 speaker systems allow you to choose the best configuration for great sound in your vehicle. Mount the woofers and tweeters separately, and a C3 component system will fill your car with incredibly detailed, rich, and crystal-clear music, perfectly positioned in your listening space. In vehicles with limited space, you can mount the C3 tweeter inside the woofer to create a full-range, coaxial speaker that still performs with breathtaking impact.
Advanced material construction leads to clean musical reproduction
The C3-570 component system uses a 5"x7" mica-filled polypropylene woofer that covers the midrange and low frequencies strongly and accurately. A specially designed frame resists unwanted resonances, keeping your music free from interference. If you mount the tweeter separately, simply install a phase plug into the woofer and the sound will disperse smoothly throughout your vehicle.
Silk tweeters and versatile crossover networks
The C3 tweeters use ferrofluid cooling to handle extreme levels of high-frequency information without overheating. Mounted separately or coaxially, these 1" silk dome tweeters broadcast crisp musical detail evenly without harshness. Separate outboard crossovers use premium components to direct the signal flow to your woofers and tweeters. You can select from three midrange settings and four levels of tweeter presence to match the speaker system to your listening environment.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Priced per pair
- component speaker system includes two 5"x7" woofers, 2 tweeters, two external crossovers, and two woofer grilles
- mica-filled polypropylene woofer with butyl rubber surround
- glass-filled polymer frame with Elevated Frame Cooling
- 1" silk dome tweeter
- 2-way external crossover with adjustments for coaxial or separate tweeter placement, and 4-position tweeter level
- tweeter mounts for separate or coaxial installations included
- phase plug provided when tweeter mounted separately
- power range: 5-75 watts RMS
- frequency response: 48-25,000 Hz
- sensitivity: 90 dB
- depth: 2-9/16"
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 99021
What's in the box:
- 2 Woofers
- 2 Tweeters
- 2 Crossovers
- 2 Bottom mount adapter rings
- 2 Flush mount tweeter housings
- 2 Surface mount tweeter housings
- 2 Coaxial mount tweeter fixtures
- 2 Metal spring clips for tweeter fixtures
- 2 M4x30mm Pan-head machine screws
- 2 Crimp-on 0.187" Male quick slides
- 2 Crimp-on 0.110" Male quick slides
- 2 Crimp-on 0.25" Female quick slides
- 2 Crimp-on 0.205" Female quick slides
- 4 Crimp-on 0.110" Female quick slides
- 12 Crimp-on spade connectors
- Four 1" Flat head self-tapping screws
- Twelve 1-1/8" Pan head self-tapping screws
- 8 Speed clips
- Owner's manual
- Woofer cutout template
JL Audio C3-570 reviews
Sound can be detailed , but harsh on the tweeter side. I think Morel components would have smoother sound.
1 of 1 found this helpful
They are ok. They just cant handle the power of my Punch amp. A lot of clipping at the top end.
1 of 1 found this helpful
I was a little undecided if I wanted to spend the dollars for these speakers, but I have no regrets. They have superior clarity. The highs are amazing and the midrange is spot on. I paired this set with a JL xd 700/5 v2 and they rock. I would highly recommend.
Pros: Quality, easy instructions, all around good speaker
0 of 0 found this helpful
More details on the JL Audio C3-570
Features & specs
|Tweeter Design||1" Dome|
|Woofer Composition||Mica-filled polypropylene|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||90|
|Sensitivity at 2.83 volts||93|
|Frequency Response||48 - 25k Hz|
|Minimum RMS Wattage||25|
|Maximum RMS Wattage||75|
|Peak Power Handling (Watts)||225|
|Top-mount Depth (Inches)||2 1/2|
|Bottom-mount Depth (Inches)||3 1/8|
|Cutout Diameter or Length (inches)||0|
Woofers: The JL Audio Evolution C3-570 convertible component system includes 5x7 woofers with injection-molded polymer frames, mineral filled polypropylene cones, rubber surrounds, ferrite magnets, and 1.2" voice coils with Kapton formers. In the center of each cone is a phase plug; the phase plug can be removed and the tweeter mounted in its place to create a coaxial speaker.
Tweeters: The 1" edge driven silk dome tweeters are Ferro fluid cooled and use neodymium magnets. Silk is lightweight and great for high frequency extension and efficiency. It is also designed for durability in the extreme automotive environment. Flush mount and surface mount housings are included, along with fixtures to coaxially mount the tweeters to the woofers.
|Frame Diameter||Cutout Diameter||Mounting Height||Mounting Depth|
|Surface Mount||1.933"||Screw holes only||0.881"||Screw depth only|
Coaxial Mounting: The tweeters can be mounted in the center of the woofers to create coaxial speakers. When the tweeters are mounted to the woofers the speaker is taller; the mounting height increases to 0.797 inches and tweeter protrusion to 0.180 inches.
Two-way Crossover System: The C3 component system utilizes a 2-way crossover system with Mylar capacitors and air-core inductors:
- High Pass: second order (12 dB/octave slope); four tweeter level settings are selectable to compensate for mounting location or orientation; +2.0 dB, Reference, -2 dB, and -4 dB
- Low Pass: first order (6 dB/octave slope)
- Midrange Presence: there are three settings that affect the amplitude of the upper midrange response, designed to compensate for mounting location or orientation; choose High, Reference, or Low
Tweeter Protection: The crossover network has a polyswitch tweeter protection circuit built in; it monitors the current and disconnects the tweeter when it senses and overload. The circuit automatically resets once the overload is removed.
Crossover Wiring: The terminal strip will accept bare wire or spade connectors up to 0.32" wide (the included crimp-on spade connectors are 0.255" wide).
- Width: 3.365"
- Height: 1.422"
- Depth: 4.745" (plus wire)
Connection Note: The C3 component system comes with no speaker wire. Instead, a number of spade connectors and quick slides are included in the hardware pack to be crimped onto speaker wire you provide.
Size Classification Note: The C3-570 will fit many 5x7 and 6x8 OEM replacement applications; please refer to the Crutchfield Vehicle Selector to confirm fit in your vehicle. The included bottom mount adapter rings can also be used to raise the woofer when top mounting; the depth changes to 2.088 inches and the mounting height to 0.832 inches.
Power Handling: JL Audio publishes several power specifications for this speaker, 75 watts continuous power handling (RMS), 225 watts peak music power, and 25-150 watts recommended amplifier power (RMS). We've listed the conservative combination of 25-75 watts RMS in the specs table.