About the Scosche SA-69 Speaker Mounting Brackets
Scosche's 82-3004 brackets will allow you to install select 5-1/4" or 6-1/2" speakers in the 6"x9" factory speaker openings of many vehicles. Priced per pair. Please enter your vehicle information or call an Advisor at 1-888-955-6000 to confirm that these adapters are compatible with your vehicle. Warranty: 60 days.
What's in the box:
- Two 6x9 Speaker adapter brackets
- Eight 15mm Elevator bolts
- 8 Flat washers
- 8 Nuts
- Eight 3/4" Self-tapping screws
- 8 Speed clips
These fit great for the deck speakers on a '04 Accord. Hardware was included which was very handy.
Shawn from Reading, PA
Can you adjust these to fit a 6-3/4" speaker?
Die grinder or a round file
Scosche SA-69 Speaker Mounting Brackets reviews
Filter by rating
More details on the Scosche SA-69 Speaker Mounting Brackets
Overview: The SA69 fits many factory 6x9 speaker locations, allowing you to mount select 5-1/4s and 6-1/2s in its round opening. There is also a scored knockout for mounting a separate tweeter. (Please refer to the Crutchfield Vehicle Selector to confirm fit in your vehicle.)
6-1/2 Speakers: The brackets have screw holes for the standard 3-hole 6-1/2 pattern. If the 6-1/2 to be installed has a 4-hole pattern, new holes will likely need to be drilled in the bracket.
5-1/4 Speakers: While a 5-1/4 speaker will mount easily in this bracket given the bolt pattern, the frame of many 5-1/4s (about one in three) is smaller than the opening in the bracket, making a 6-1/2 a better fit. When using a 5-1/4, a speaker baffle might also be needed to seal the rear of the speaker.
Tweeters: The knockouts for mounting separate tweeters have several scored concentric circles, ranging from approximately 5/8" to 1-3/4". By design, the tweeter plug is not easily removed, it will need to be cut out.
- Length: 9.32"
- Width: 6.45"
- Opening Diameter: 5.081"
- Bracket Thickness: 0.162"
Q Crutchfield asked: Why did you buy this?
10 questions already asked