Contact us
Close contact box

Kicker CK4

Complete 4-gauge amplifier wiring kit — includes 2-channel patch cable and speaker wire

Item # 206CK4

Your amplifier needs hefty power and ground wiring in order to deliver the big power you want.

Your amplifier needs hefty power and ground wiring in order to deliver the big power you want.

Item # 206CK4

Ships from distributor

In Stock
C$199.99
Add to wishlist

About the Kicker CK4

This kit delivers all the power and signal your system needs

Your amplifier needs hefty power and ground wiring in order to deliver the big power you want. Kicker's CK4 amp wiring kit includes the power, ground, turn-on, and signal wiring for any amplifier with a fuse rating of up to 100 amperes. This kit is suitable for an amplifier or amp system with a total output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps.

This kit delivers all the power and signal your system needs

Your amplifier needs hefty power and ground wiring in order to deliver the big power you want. Kicker's CK4 amp wiring kit includes the power, ground, turn-on, and signal wiring for any amplifier with a fuse rating of up to 100 amperes. This kit is suitable for an amplifier or amp system with a total output of about 650 watts RMS for Class AB amps or about 1000 watts RMS for Class D amps.

Includes patch cable and speaker wire

The CK4 kit includes a 17-foot, 2-channel twisted pair patch cable that'll send the signal reliably from the receiver to your amp with minimal noise. Also, Kicker provides 40 feet of 16-gauge speaker wire, enough to take care of both the front and rear speakers in most installations. Kicker makes all their wires from oxygen-free copper so you can count on maximum power and signal transfer with minimum resistance or interference.

READ LESS

Product highlights:

  • amplifier wiring kit
  • cables meet or exceed the American Wire Gauge specifications and requirements
  • 17 feet of 4-gauge power cable with attached ring terminal and protective wire loom — blue
  • 2 feet of 4-gauge ground cable with attached ring terminal — gray
  • 17 feet of 16-gauge turn-on lead wire — clear
  • one 2-channel 17-foot twisted pair RCA patch cable
  • 40 feet of 16-gauge speaker wire
  • AFS fuse holder and 100-amp fuse
  • assortment of wire termination hardware and cable ties
  • extends your Kicker amplifier's warranty by one year, if purchased along with the amp
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # CK4
KEEP READINGREAD LESS

What's in the box:

  • 17' Length of 4-gauge power wire terminated with a 5/16" ring-terminal on one end (blue/black jacket)
  • 2' Length of 4-gauge ground wire terminated with a 5/16" ring-terminal on one end (dark gray jacket)
  • 17' Length of 16-gauge remote turn-on wire (clear jacket)
  • AFS fuse holder
  • 100 amp AFS fuse (installed)
  • 17' Stereo RCA patch cord
  • 40' Length of 16-gauge speaker wire
  • One 7/8" Self-tapping screw (ground)
  • 1 Flat washer
  • 1 Plastic grommet
  • 1 Red butt-connector
  • Six 5" wire ties
  • Four 3/16" crimp-on spade-connectors
  • 2 Blue spade-connector sleeves
  • 2 Black spade-connector sleeves

Featured video:

Customer reviews

Loading reviews...

Kicker CK4 reviews

Average review:

14 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Kicker CK4

Crutchfield customer from Gretna, LA on 2/3/2019

Verified customer (What's this?)
Verified employee purchase (What's this?)

Great kit

Pros: Kicker quality

Cons:

Crutchfield response on

0 of 0 found this helpful

Kicker CK4

Crutchfield customer from Springfield, OH on 4/23/2018

Verified customer (What's this?)
Verified employee purchase (What's this?)

Must have works perfect

Pros:

Cons:

Crutchfield response on

0 of 0 found this helpful

Quality amp kit

Angel from Dallas, TX on 3/8/2018

Verified customer (What's this?)
Verified employee purchase (What's this?)

This amp kit is a MUST when considering purchasing a Kicker amplifier, not only does it supply the clean current needed but also extends the amplifier warranty another year! I am completely satisfied with the quality and if needed to buy again, I would.

Pros: Quality product and extends Kicker amplifier an additional 1 year

Cons: Could come with directions for installation

Crutchfield response on

0 of 1 found this helpful

Awesome kicker amp kit

Russell from Hinesburg, Vt on 5/2/2017

Verified customer (What's this?)
Verified employee purchase (What's this?)

This kit works great in my car! Just hooked up two 12 in kicker comp S subs on a 1500 watt kicker 2 channel amp. Definitely worth the extra money to get a good kit. Others don't quite allow for the same range of sound due to lack of power conservation throughout the cable. A must use if you plan on putting together an awesome sound system.

Pros: Much better sound and range Easy to use full set with extra wiring and components for variety of cars

Cons: Price price price

Crutchfield response on

1 of 1 found this helpful

Kicker CK4

Crutchfield customer from Milton, FL on 9/5/2016

Verified customer (What's this?)
Verified employee purchase (What's this?)

Works excellent! Very well constructed and built to withstand high wattage systems. Upgraded from a 16gauge wiring kit and can definitely tell a different in durability

Pros:

Cons:

Crutchfield response on

1 of 1 found this helpful

Kicker KX 800.5

t.m from Sulphur, LA on 6/12/2016

Verified customer (What's this?)
Verified employee purchase (What's this?)

Everything you need to setup 2 channels of an amplifier and good quality.

Pros: Like how flexible it is, easy to maneuver where you need it.

Cons: I think 20 feet would be a better length for the wires/cables.

Crutchfield response on

0 of 0 found this helpful

Just what you need

Luke from Gulfport, MS on 4/21/2016

Verified customer (What's this?)
Verified employee purchase (What's this?)

Solid kit. All you need after this kit is the screws to bolt the subs in place. Using this kit on a Kicker DXA1000.1 amp with 2 compRT's. Happy system!

Pros: Nice cables and wires. Plenty of length. One and done so to speak

Cons: Needs a 150 amp fuse and some mounting screws for subs.

Crutchfield response on

0 of 2 found this helpful

Perfect

Greg from melbourne, FL on 3/21/2016

Verified customer (What's this?)
Verified employee purchase (What's this?)

Kit came with every piece needed to make it a clean install for a single amplifier. All wires were more then adequate with length and quality. The added speaker wire was good stuff as well as the remote line and RCA supplied. Would purchase or recommend

Pros: Good wire, everything you need

Cons: None

Crutchfield response on

0 of 0 found this helpful

Incomplete

Crispin from Selah WA on 1/29/2016

Verified customer (What's this?)
Verified employee purchase (What's this?)

For the cost they should provide everything for the install. Lacks U clips to connect Power and ground cables to amp. Have to chase down at hardware store.

Pros: Incomplete. Therefore nothing good.

Cons: Incomplete. Therefore the entire product is trash. Don't buy.

Crutchfield response on

0 of 17 found this helpful

Amp

Amp from Lafayette in on 12/9/2015

Verified customer (What's this?)
Verified employee purchase (What's this?)

Great product

Pros: None

Cons: None

Crutchfield response on

0 of 2 found this helpful

Great product

Brandon from North Carolina on 10/4/2015

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pre installed terminals on power and ground made it a breeze

Pros: Pre installed terminals. Sheathing on power cord

Cons: None

Crutchfield response on

0 of 1 found this helpful

Everything You Need

Matt H. from Buffalo, NY on 1/23/2015

Verified customer (What's this?)
Verified employee purchase (What's this?)

This box has everything you'll need to complete an amplifier installation correctly. Quality parts and hardware. Only issue is that kit lacks any instructions which might present a challenge for first time installers.

Pros: Quality Parts, Heavy Gauge Wire

Cons: Lacks Instructions

Crutchfield response on

0 of 2 found this helpful

Installation Kit

Crutchfield customer from Avon, OH on 12/29/2014

Verified customer (What's this?)
Verified employee purchase (What's this?)

Nice kit for the money

Pros:

Cons: Speaker leads not long enough to reach the amp in the back of my van. Needed to make a 24 foot cable.

Crutchfield response on

0 of 3 found this helpful

Perfect

Noah from Elko New Market, MN on 12/9/2014

Verified customer (What's this?)
Verified employee purchase (What's this?)

Made installation of my new sub and amp a breeze. high quality and plenty of wire

Pros: Quality and quantity

Cons:

Crutchfield response on

0 of 1 found this helpful

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Kicker CK4

Mark G.

Product Research

Features

Single Amplifier 4-AWG Kit: This kit includes the following:

  • One 17' length of 4-gauge power wire (terminated by a 5/8" wide, 5/16" diameter ring-terminal)
  • One 2' length of 4-gauge ground wire (terminated by a 5/8" wide, 5/16" diameter ring-terminal)
  • One 17' length of 16-gauge remote turn-on lead
  • 17' Stereo RCA patch cord
  • 40' Length of 16-gauge speaker wire
  • AFS fuse holder
  • 100A AFS fuse (installed)
  • One 7/8" self-tapping ground screw with flat washer
  • One plastic grommet
  • Four 3/16" crimp-on spade-connectors (5/16" outer width)
  • 2 Blue spade-connector sleeves
  • 2 Black spade-connector sleeves
  • Six 5" wire ties
  • One red butt-connector

Hyper-Flex Power Cable: The power, ground, and speaker wires feature a Hyper-Flex jacket for easy installation. The RCA patch cord also has a Hyper-Flex jacket. Four feet of the power wire is covered with a wire loom to protect it in the engine compartment.

Silver Tinned OFC Copper: The power and ground cables are constructed of 1862 strand silver tinned OFC copper. The speaker wire is 111 strand silver tinned OFC copper.

Fuse Holder: The fuse holder requires a 5mm Allen wrench to secure the input and output wires, and to change the fuse. There are four holes in the base for mounting and the dimensions are approximately:

  • Width: 3-1/2"
  • Height: 1-3/8"
  • Depth: 1-5/8"

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
This mono amp required 4 guage wire [ Russell  Dec 10, 2018 ]
A
The Kicker brand is quality. All inclusive with good patch cords. [ David  Sep 17, 2018 ]
A
quality [ Chet  Jul 18, 2018 ]
A
It has everything you need and extends my amp warranty by one year. [ WILLIAM R  Jun 12, 2018 ]
A
I like too [ Darnell  Jan 02, 2018 ]
A
Organized along with the prints I was found on the site, understood exactly how and why each cable was needed. [ Michael  Aug 13, 2017 ]
A
I wanted to upgrade my wring to compliment the Kicker CX600 amp I have for my Subwoofer and perhaps have enough 'strength' to power an additional amplifier to the speakers in the future. Having read the few reviews for this product- I was compelled to purchase it. [ Joseph  Jan 13, 2017 ]
A
new speakers for car [ JOHN  Dec 18, 2016 ]
A
I chose the wiring kit because there was an extended warranty for the speakers with these. I also watched the video and it showed more power moves from the amp to the speakers with Kickers wiring kit. What the heck, I'll give it a try. [ DAVID  Dec 04, 2016 ]
A
ease of installation [ David  Aug 24, 2016 ]
A
using a kicker dual 12 box sub with kicker amp combo. I like to use products designed to be used with each other. cant beat the quality of kicker and everything you need in 1 kit [ cody  Apr 13, 2016 ]
A
Nice complete kit [ I  Mar 14, 2016 ]
A
Low loss of signal [ Robert  Jan 20, 2016 ]
SHOW MORESHOW LESS

1 question already asked

Q
Can use this kit with kicker amp cx300.1. I'm planing to upgrade the amp later on to a 600 rms one but for the moment I'm going to be using this 300 rms?
[ Wforce  Apr 04, 2016 ]
2 answers
A
Yes, if it's big enough for 600rms it will be more than enough for 300.1 .With power wiring you can't go too big. It might be a tight fit in the 300.1 power terminal. But it should be fine.
[ james  Apr 04, 2016 ]
A
I've been using this kit on a 1000rms amp for over a year now and have had no issues with it.
[ Matt  Apr 04, 2016 ]

Loading articles...

TOP