About the Kicker CompVT 43CVT122
Bass for your space
Bass for your space
Just because you have limited space doesn't mean you have to do without bass. Kicker designed their Comp VT Series 43CVT122 12" subwoofer to deliver powerful performance from a shallow enclosure, great for pickups or other vehicles with limited space.
Zone for the cone
This single voice coil subwoofer features a specially-designed reinforced cone to pump out the lows while maintaining a top-mount depth of only 4-3/8". And with the included clearance plate the sub can sit in a recess in the back of the enclosure, letting you make a thin box even thinner. The basket's full perimeter venting and UniPlate™ back plate and pole piece keep things cool, supplying outstanding thermal management in a thin sub.
Power handling and flexibility
This sub handles up to 350 watts RMS to bring out the depth your music's been missing, while its 2-ohm impedance draws maximum power from your amp. This versatile sub works well in sealed or ported enclosures.
- 12" 2-ohm subwoofer
- injection-molded polypropylene cone with Santoprene rubber surround
- power handling: 350 watts RMS
- peak power handling: 800 watts
- sensitivity: 87.1 dB
- top-mount depth: 4-3/8"
- sealed box volume: 1.0-4.6 cu. ft.
- ported box volume: 1.75-2.25 cu. ft.
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 43CVT122
What's in the box:
- One 12" Subwoofer
- Metal clearance plate
- Kicker logo sticker
- Manual (English/ Spanish/ German/ French)
- Template on box
More details on the Kicker CompVT 43CVT122
Features & specs
|Ideal Sealed Box Volume (cubic feet)||N/A|
|Ideal Ported Box Volume (cubic feet)||N/A|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||No|
87.1 dB at 1 watt |
|Frequency Response||25 - 500 Hz|
|Max RMS Power Handling||350|
|Peak Power Handling (Watts)||800|
|Top Mount Depth (inches)||4 5/16|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||10 15/16|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation. The boot is removable if needed for tight installations.
Break-in Period: The high-performance suspension system makes the speaker very stiff out-of-the-box. Approximately 2 weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
Shallow-Mount: Kicker's new CVT series is designed to minimize depth, giving you subwoofer options where standard enclosures don't fit. The solid-pole design allows the woofer to be mounted directly against the rear wall of a sealed enclosure. The spring-loaded binding posts are mounted parallel to the cone surface to minimize depth. Also the steel Clearance Plate enables you to cut out part of the back of the enclosure to create more room for the woofer magnet, subtracting the enclosure wall depth from the equation.
Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Kicker recommends sealed enclosures from 1.0 ft³ to 4.6 ft³.
Vented Enclosures: Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. Kicker recommends ported enclosures in the following range:
- Minimum Enclosure Volume: 1.75 ft³ with a 12-1/2" x 2-1/2" x 20" slot port
- Maximum Enclosure Volume: 2.25 ft³ with a 12-1/2" x 3" x 20-1/2" slot port
2 questions already asked