About the Kicker 44KSS504
Bring on the smoothness
Bring on the smoothness
I love a perfectly crafted pop song, and if I had to pick a pair of affordable car speakers to handle those harmonies and pristine production, Kicker's KS Series speakers would be a great choice. Their 44KSS504 component system features two quality 5-1/4" woofers, two powerful tweeters, and two external crossovers. The polypropylene woofer with its powerful magnet handles up to 100 watts RMS, giving you natural sound with plenty of low-frequency punch. And the 1" silk dome tweeter delivers every ounce of smoothness you'd want in your music's vocal and instrumental details. The system's efficient crossovers act as traffic cops, diverting low and high frequencies to the designated speakers to reveal nuances you may have never heard in your favorite songs.
The KS component woofer cone features a phase plug that you can remove and replace with the component tweeter for use as a coaxial speaker.
A+ for versatility
Kicker also gives you the option of screwing the component tweeters on in place of the woofer's removable phase plug, giving you a coaxial speaker that benefits from the superior performance of an external crossover.
Do touch that dial
While we'd recommend using an aftermarket amp to power this system, Kicker gave the KS Series a highly sensitive design that conjures hefty volume even from low-powered factory radios.
These low-profile speakers feature a reduced mounting depth, making them a match for almost any car. And the refined, black grilles included with the package allow you to do a custom installation that'll add nice flair to your factory interior.
- component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
- 5-1/4" polypropylene woofer cone with rubber surround
- 1" silk dome tweeter
- external crossover network with 3 tweeter levels (0, +4.5, +9 dB)
- handles up to 100 watts RMS (200 watts peak power)
- frequency range: 38-21,000 Hz
- sensitivity: 88 dB
- woofer top-mount depth: 1-13/16"
- impedance: 4 ohms
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 44KSS504
What's in the box:
- 2 Woofers
- 2 Phase plugs (installed)
- 2 Woofer grilles
- 2 Grille mounting rings
- Two 5x7 Adapter rings
- Two 1" Tweeters (each with 6" Wire attached)
- 2 Tweeter mounting posts
- 2 Tweeter backs
- 2 Crossovers
- 2 Surface mount tweeter housings
- 2 Flush mount rings (tweeter)
- 2 Front angle rings (tweeter)
- 2 Back angle rings (tweeter)
- 2 Short mounting nuts (tweeter)
- 2 Long mounting nuts (tweeter)
- Two 10' Lengths of woofer speaker wire (tinned wire on one end and quick slides on the other)
- Two 10' Lengths of speaker wire (tinned wire on both ends)
- Two 6' Lengths of tweeter speaker wire (tinned wire on one end and quick slides on the other)
- Two M4x8mm Machine screws
- Twelve 1-1/8" Pan head screws
- Four 5/8" Flat head screws
- 12 Speed clips
- 4 Red plastic wire caps
- Two 3-1/2" Zip ties
- Grille putty
- Owner's manual (English/ Spanish/ German/ French)
Kicker 44KSS504 reviews
Nice set of speakers. Kit includes a large amount of items to assist with installation to include wire and multiple mounting options. Obviously not top end units, but perfect upgrade for my sprinter based RV.
Pros: Price and quality
0 of 0 found this helpful
I started with the Kicker KKS504 components, returned them for the Morel 572 and then returned the Morel for the JBL068components. Crutchfield was wonderfully patient and willing to satisfy. The Kicker's were very good, but only a 5 1/4" woofer. The tweeters were a little tinny, but larger than the others and very good also. Best value. The Morel were not high quality craftmanship or design. They distorted badly, so I sent them back. When removing them I saw the cause of the distortion. The quick disconnect on the woofer was pushed into the cone because it was so flimsy. The tweeter mount was the best of the three. All tweeters were about the same. The JBL was clearly the highest quality. Real binding posts! No flimsy quick disconnects. The whole woofer was clearly more solid and better designed. 3/4" tweeter just a tad tinny. The JBL is 2.5 ohms and it pulls power out of my amp and sounds great. 1 JBL, 2 Kicker, 3 Morel.
3 of 4 found this helpful
Awesome product for the price
1 of 1 found this helpful
Sound great good speakers
1 of 1 found this helpful
great price. 1 day delivery. Easy install. all hardware needed. great sound!!!
Pros: great price. 1 day delivery. Easy install. all hardware needed. great sound!!!
1 of 2 found this helpful
More details on the Kicker 44KSS504
Features & specs
|Speaker Size||5 1/4|
|Tweeter Design||1" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||88|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||38 - 21k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||100|
|Peak Power Handling (Watts)||200|
|Top-mount Depth (Inches)||1 13/16|
|Bottom-mount Depth (Inches)||2 1/16|
|Cutout Diameter or Length (inches)||4 1/2|
Woofer Cones: The Kicker KS-series speakers feature durable Polypropylene woofer cones, resistant to the moisture and temperature extremes found in automotive applications.
5x7 Bracket: The included brackets allow mounting the woofers in many 5x7 and 6x8 applications.
Tweeter Mounting Options: The tweeters come with brackets to allow multiple mounting configurations; flush-mount, angle-mount, and surface-mount:
|Mounting Depth||0.65"||0.62"||screw depth|
Coaxial Tweeter Mount: In addition to standard tweeter mounting options, the included tweeter mounting post lets you mount the tweeter directly to the center of the woofer, giving you a standard coaxial speaker. When the tweeter is attached to the woofer the mounting height increases to 0.743" (top mount) and the tweeter protrusion increases to 0.469" (bottom mount).
Crossovers: The component system includes passive 2-way crossover networks for a seamless transition between the woofers and tweeters. The slope is 12dB per octave (both high pass and low pass) and the crossover point is 4000 Hz. A switch on each crossover allows you to adjust the tweeter output; 0 dB, +4.5 dB, or +9 dB. The crossover has screw terminals that will accept bare wire or spade terminals up to 0.3" wide. The crossovers' dimensions are:
- Length: 5.58"
- Width: 2.85"
- Height: 1.27"
Q Crutchfield asked: Why did you buy this?