Contact us
Close contact box

Kicker 42PXA2002

Compact 2-channel amplifier — 100 watts RMS x 2 at 1 ohm

Item # 206PXA2002

Item # 206PXA2002

Ships from distributor

In stock

C$329.99 -C$50.00 Price break


About the Kicker 42PXA2002

Kicker 42PXA2002

The wonder amp

Yes, ladies and gents, Kicker's 42PXA200.2 amp delivers up to 100 watts per channel, yet it's no bigger than a brick. That's right, it's astonishingly small, which means you can get creative and stash it in nearly any nook or cranny in your car. And at that size, why not install it on your motorcycle, ATV or boat? Kicker designed this 2-channel amp for you open-air easy riders, with a weather-resistant enclosure, no-rust mounting hardware, a single Molex plug for all wiring, noise-killing circuitry, and plenty of power to combat wind and road noise.

Power a pair

This amp will drive a set of 2-ohm powersports speakers with 50 watts per channel, so you'll have plenty of power to enjoy clear, solid sound in the open air. A switchable high-pass filter allows you to remove low bass from your speakers so they'll play louder and cleaner.

Product highlights:

  • 2-channel amplifier
  • 100 watts RMS x 2 at 1 ohm
  • 50 watts RMS x 2 at 2 ohms
  • 25 watts RMS x 2 at 4 ohms
  • frequency response: 10-20,000 Hz
  • switchable high-pass filter (60, 80, or 120 Hz at 24 dB/octave)
  • preamp and speaker-level inputs
    • auto turn-on with speaker-level inputs
  • 14- to 10-gauge power and ground leads recommended - wiring and hardware not included with amplifier
  • fuse rating: 10A x 1
  • 7-1/16 W x 1-9/16"H x 3-7/16"D
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # 42PXA2002

What's in the box:

  • Two-channel amplifier
  • 12" Input/Output harness
  • In-line fuse holder on 14-gauge wire
  • 10A ATO fuse (installed)
  • Four 1" Self-tapping screws
  • Two 14-16 Gauge crimp-on ring terminals
  • Two 11-7/8" plastic wire ties
  • Owner's Manual (Eng/Span/Ger/Fren)

Featured video:

Customer reviews

Loading reviews...

Kicker 42PXA2002 reviews

Average review:

8 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)



Crutchfield response

<< >>

Product Research


Overview: PXA series amplifiers are designed for motorized vehicles with small battery/charging systems; Kicker's new Direct Amp Technology uses the vehicle's charging system as its power supply, offering 90-percent efficiency. Little ventilation is required and with its small footprint, the PXA200.2 can be installed in motorcycle saddle bags or fairings, glove compartments, or other small spaces.

Power Output: The PXA200.2 is a stereo amplifier designed to output 100 watts RMS x 2 channels at 1Ω (<1% THD+N), 50 watts RMS x 2 channels at 2Ω (< 1% THD+N), and 25 watts RMS x 2 channels at 4Ω.

Controls: The controls for the amplifier include a rotary gain control and four DIP switches. The DIP switches, located on the end of the amp under a rubber cover, can select the following:

  • High Pass Crossover: 60Hz, 80Hz, 100 Hz, 120Hz or off, based on the configuration of two DIP switches
  • Input Level: select high (speaker level) or low (line level)
  • Auto Turn-on: select 12V (amp turns on when +12 volts is applied to the remote wire in the harness) or DC (amp turns on when a 6 volt surge is detected from a speaker level source)

Input Signal: The PXA200.2 is capable of receiving either high- or low-level input signals, and you can select the input type on the end of the amp (DIP Switch #3). A pair of female RCA jacks is included on the supplied wiring harness. If you are using a speaker-level source, simply cut the RCA plugs off of the harness and splice the head unit's speaker wires onto the harness. If you prefer not cutting the RCA plugs off, use the optional Kicker KiSL speaker level to RCA adapter. The Input Sensitivity is 250mV-10.0V (High Level), while the Low Level Input Sensitivity is 125mV-5.0V.

Differential Audio: The differential audio circuit reduces the likelihood of picking up any engine noise, and helps lower THD (Total Harmonic Distortion).

Weather Resistant: The PXA Amps are weather-resistant, using a conformal-coated circuit board for protection against the elements. They also include no-rust stainless-steel mounting hardware.

Loading accessories...

Customer Q&A

Crutchfield asked: Why did you buy this?
Small size [ Steve Camper  Oct 05, 2019 ]
Marine grade and quality of brand. [ Michael  Mar 12, 2019 ]
I bought this amp due to it's size, power output and it having high pass xover ability. I plan to install it in my Subaru Outback to power my aftermarket dash tweeters. [ Jason  Aug 16, 2018 ]
need a 2 channel amp [ ronald  Feb 28, 2018 ]
The design with low current draw [ Shannon  Nov 24, 2017 ]
power some jl 3.5 in the dash [ Joey  Sep 09, 2017 ]
Because I received great help from Adam via chat! [ Kerry  Jun 14, 2017 ]
Speaker level inputs [ Mike  Mar 19, 2017 ]
small [ James  Dec 07, 2015 ]

Loading articles...