About the Morel MT 450
Give your custom component system impact with Morel's Elate Carbon tweeters. Morel enhances the performance of their MT450 open-cavity silk dome tweeter with a coating of Acuflex™ compound, which helps damping for a more natural, all-round cleaner sound. With power-handling up to 130 watts RMS, you'll hear awesome detail at any volume, and the tweeter's compact design makes it in easier fit in more factory tweeter locations.
Morel complements the powerful sound with a powerful look — an aluminum faceplate and Lotus transparent grille for custom installations.
Crossovers not included
If you're not using an active crossover with your custom system, be sure to use Morel's external crossovers (not included) and power your component system with an outboard amplifier to make the most of Morel's superior speaker technology.
- Acuflex-coated silk dome tweeters (pair)
- chrome-ringed flush- and surface-mount hardware included
- open cavity design
- handles up to 130 watts RMS (350 watts peak power)
- frequency response: 1,400-25,000 Hz
- sensitivity: 91 dB
- impedance: 6 ohms
- mounting depth: 1/2"
- cutout diameter: 2"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 323145-125
What's in the box:
- 2 MT 450 Tweeters (with attached 7" length of speaker wire)
- 2 Grilles (installed)
- 2 Flush mount housings (tweeters installed)
- 2 Flush mount clamps
- 2 Angled surface mount housings
- Four 3/4" Screws
- Installation guide
More details on the Morel MT 450
Features & specs
|Tweeter Design||1.1" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||91|
|Frequency Response||1400 - 25k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||130|
|Peak Power Handling (Watts)||350|
|Top-mount Depth (Inches)||0 3/4|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||1 7/8|
|Mounting Height (Inches)||0.316|
Dome Material: The silk dome tweeters are coated with Acuflex, a damping compound designed to minimize distortion. The tweeters can be surface or flush mounted using the included adapters. The surface mount housing angles the tweeters at approximately 40°. The dome is very delicate, so the mesh grille should always be used.
|Flush Mount||Surface Mount|
|Mounting Depth||0.730"||screw depth|