About the Morel Virtus Nano Integra 602 Carbon
A 2-way speaker like no other
A 2-way speaker like no other
Morel broke the mold with their Virtus Nano woofer, delivering a component system that would let audiophiles expand their hi-fi audio options in classic, custom, or just plain complicated cars. This Virtus Nano Integra 602 Carbon 6-1/2" 2-way car speaker takes that astonishingly shallow woofer with a mounting depth of 11/16", and incorporates Morel's 1-1/8" silk dome tweeter in the center of the woofer in a coaxial-like structure. What you get is an extremely versatile speaker that's convenient to install and gives you awesome full-range sound.
Impossibly thin woofer
You wouldn't think a woofer so shallow could deliver low frequencies so substantially, but that's exactly what the Virtus Nano Integra 602 Carbon woofer does. True to form, Morel's engineering team tested and improved this component system until it exceeded their uncompromising standards. Morel uses their unique aluminum External Voice Coil (EVC™) and neodymium magnets to help give the shallow woofer enough power handling to deliver satisfying low-end punch. The “grand-dome” cone design uses a damped sandwich hybrid carbon fiber and foam core to achieve a widely dispersed sound and solid off-axis response.
Morel's 1-1/8" silk dome tweeter contributes warm highs to the distinct Virtus sound, and the one-of-a-kind Acuflex™ compound that coats the tweeter helps damping to bring out the fine detail in your music.
- 6-1/2" 2-way speaker
- carbon/foam sandwich dome woofer with butyl rubber surround
- steel basket
- 1-1/8" Acuflex coated silk dome tweeter
- handles up to 100 watts RMS (300 watts peak power)
- frequency response: 50-25,000 Hz
- sensitivity: 88 dB at 2.83 V
- top-mount depth: 11/16"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 350322-305
What's in the box:
- Two 2-way speakers
- 2 MXR 250i Crossovers
- 2 Grilles
- Six 3/4" Screws
- Eight 1-1/4" Screws
- 8 Speed clips
- Four 0.25" Crimp-on female quick slides
- Installation guide
- 2 Morel logo badges
- Morel window sticker
- Genuine product verification instructions
More details on the Morel Virtus Nano Integra 602 Carbon
Features & specs
|Speaker Size||6 1/2|
|Tweeter Design||28mm Dome|
|Woofer Composition||Carbon/Foam Core|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||87|
|Frequency Response||50 - 25k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||100|
|Peak Power Handling (Watts)||300|
|Top-mount Depth (Inches)||0 3/4|
|Bottom-mount Depth (Inches)||1|
|Cutout Diameter or Length (inches)||5 3/8|
|Mounting Height (Inches)||0.662|
Time Aligned Structure: The tweeter is concentrically aligned with the woofer, so sound radiates from the same point for both. This minimizes phase error and allows the sound field to be constant in all directions, improving time alignment.
Size Classification Note: Some manufacturers, including Morel, call this size speaker a 6½". Because it requires a larger cutout than a standard 6½" speaker, Crutchfield has traditionally referred to this size woofer as a 6¾". Please enter your vehicle information to confirm fit.
Crossover: The outboard crossovers have screw terminal inputs and outputs (0.315" wide). A jumper inside each crossover allows you to adjust the tweeter output level; choose -2 dB, 0 dB, or +2 dB. Because the woofer and tweeter have separate inputs on the speakers, they can be bi-amped using an electronic crossover. (2.5 kHz is the lowest crossover point Morel recommends in this configuration.)
- Width: 5.57"
- Height: 1.45"
- Depth: 4.17"
Speaker Terminals: The speaker terminals are male quick slide lugs:
- Positive: 0.25"
- Negative: 0.25"
- Positive: 0.110"
- Negative: 0.110"
1 question already asked