About the Brandmotion 9002-8817
Add a backup cam to your Wrangler radio
Add a backup cam to your Wrangler radio
Adding a backup cam to a Wrangler makes total sense, but you didn't have a ton of options if you wanted to keep your factory touchscreen radio... until now. Brandmotion's 9002-8817 rear-view camera package integrates nicely into the rugged design of your Jeep Wrangler and displays everything it sees on your factory touchscreen. The included CMOS camera offers a wide view and excellent visibility for night driving, making it a must-have for the hard-drivin' Wrangler owner. Use it for off-road reversing when you need to watch out for trenches and boulders, or install this cam with the optional parking lines activated if you're a town & country driver.
A fit for your spare
Brandmotion includes a bracket and camera head extension piece so you can mount the camera between your rear-mounted factory spare tire. You'll also find the wiring harness needed for factory integration, as well as a handy module that plugs into your Jeep's OBDII port and reprograms the factory radio to be compatible with the camera.
Installation Note: Some wire-splicing may be required, so you may want to consider a professional installation if this is your first install of this kind. The OBDII flash module can only be used on one vehicle.
- CMOS color rear-view camera
- includes bracket for fitting between spokes of rear spare tire
- wide-angle camera compatible with select Jeep Wrangler factory touchscreen radios
- vehicle-specific harnesses and OBDII program module included
- parking lines (selectable at time of installation)
- 170° wide viewing angle
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # 9002-8817
What's in the box:
- Camera w/integrated spare-tire bracket (attached 29' video cable)
- OBDII Flashing module
- 21" Power/video adapter cable (PWRH-0004)
- 16" Camera input harness (22-pin plug one end / female composite video plug on other end)
- Fifteen 9" wire-ties
- 3 lock-washers
- Installation instrucions
More details on the Brandmotion 9002-8817
Overview: Brandmotion's 9002-8817 kit lets you add rear-view functionality to your 2007-2018 Jeep Wrangler JK (including Unlimited version) equipped with a factory video screen and factory spare tire. It includes a high-quality CMOS camera mounted on an innovative spare tire hub mounting bracket.
Spare Tire Mount: The included camera bracket is specifically designed to mount behind the factory spare tire with the camera partially concealed between two of the upper wheel spokes. This allows the camera to be centered on the rear of the vehicle looking down, offering a wide 170˚ view.
Note: The 9002-8817 is not compatible with aftermarket spare tire wheels. If you have an aftermarket spare tire wheel, use the 9002-8847 instead.
Viewing Options: The 9002-8817 rear-camera display can be viewed in Mirror or Reverse mode and can also display Parking Assist lines. The camera wiring harness includes a small white wire that, when cut, will display the rear-view image in Reverse mode. A small green wire, when cut, will display Parking Assist lines on the rear image.
Wiring: All wiring for the add-on rear-view camera is included. The 29' video cable terminates at the radio location and features a composite video plug that can be attached to the included factory radio camera-input adapter, allowing it to be fed into the factory radio. If an aftermarket radio is used, this composite video end can be plugged directly into the rear-camera input. Bare ended power and ground wires for the camera will need to be tied into the factory wiring at the dash location.
Note: Care must be taken to not run the camera cable through the center of the camera bracket, as this will cut the cable and void the warranty.
Flashing Module: Included with the rear-view camera kit is an OBDII flash module. This is used to "activate" the rear-view feature of the factory radio, avoiding a trip to the dealership to have the vehicle flashed. After the installation is complete, the vehicle is run for approximately 20-30 seconds, then the flashing module is temporarily plugged into the OBDII port. When the green light on the flashing module lights, programming is complete and the module is removed.
Note: The flashing module is VIN locked for single vehicle use only.
2 questions already asked