Contact us
Close contact box

MTX Thunder1

Thunder Axe Series 1" soft dome tweeter pair

Item # 236THND1

Do you like your bass heavy, but your current tweeters can't seem to deliver the high frequencies in that mix? Then...

Find what Fits your car

Do you like your bass heavy, but your current tweeters can't seem to deliver the high frequencies in that mix? Then...

Item # 236THND1

This item is no longer available.

About the MTX Thunder1

Power in the mix

Do you like your bass heavy, but your current tweeters can't seem to deliver the high frequencies in that mix? Then take a look at MTX's Thunder1 tweeters. They'll handle up to 90 watts RMS, so you can play them long and hard. Complex sounds like cymbals crashing and upper-range vocals will be reproduced with impressive accuracy, transforming your vehicle's dull soundstage into a vibrant one.

Power in the mix

Do you like your bass heavy, but your current tweeters can't seem to deliver the high frequencies in that mix? Then take a look at MTX's Thunder1 tweeters. They'll handle up to 90 watts RMS, so you can play them long and hard. Complex sounds like cymbals crashing and upper-range vocals will be reproduced with impressive accuracy, transforming your vehicle's dull soundstage into a vibrant one.

Tweak your tweeters

The Thunder1's discreet design includes a built-in crossover, along with flush- or surface-mounting capability for easy installation in that perfect spot in your vehicle. Plus, you can adjust the tweeters to match up properly with all the other speakers in your installation. And MTX's  impressive 5-year prorated warranty makes the Thunder1 tweeters a smart buy.

Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.

READ LESS

Highlights:

  • 1" silk soft dome tweeter with mylar capacitors
  • flush- and surface- mounting hardware included
  • swivel feature for optimal imaging
  • power handling: 10-90 watts RMS (180 watts peak power)
  • frequency response: 2500-20,000 Hz
  • impedance: 4 ohms
  • sensitivity: 90 dB
  • flush-mount depth: 3/4"
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # THUNDER1
KEEP READINGREAD LESS

What's in the box:

  • 2 Tweeters (7" wire attached)
  • 2 Crossovers
  • 2 Surface mount housings (with tweeters installed)
  • 2 Flush mount backing rings
  • 2 Flush mount trim rings
  • 2 Foam spacers
  • 2 Flush mounting clips
  • Two M4x35mm machine screws
  • Four 3/4" Self-tapping screws
  • Cardboard template
  • Mounting diagram
  • Warranty information

Customer reviews

Loading reviews...

MTX Thunder1 reviews

Average review:

3 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

MTX Thunder1

Crutchfield customer from Romulus, MI on 5/22/2019

2017 Ford Fusion

Verified customer (What's this?)
Verified employee purchase (What's this?)

I love these MTX tweeters they are clear and they handle the power love them best decision I have made when it comes to tweeters.

Pros:

Cons:

Crutchfield response on

0 of 0 found this helpful

MTX Thunder1

Crutchfield customer from Odessa, TX on 8/4/2017

Verified customer (What's this?)
Verified employee purchase (What's this?)

Awesome product!!

Pros: Great sound clarity.

Cons: None

Crutchfield response on

0 of 0 found this helpful

Great

Holmes from Jersey City on 5/16/2014

Verified customer (What's this?)
Verified employee purchase (What's this?)

These tweeters work great. They provide great highs when you have many subwoofers.

Pros:

Cons:

Crutchfield response on

0 of 1 found this helpful

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the MTX Thunder1

Pat M.

Features & specs

General
Speaker Size
Design 1-way
Tweeter Design 30mm Dome
Impedance (Ohms) 4
Tweeter Composition Silk
Woofer Composition ---
Woofer Surround ---
Parts Warranty 2 Years
Labor Warranty 2 Years
Specifications
Sensitivity (1W at 1 meter) N/A
Sensitivity at 2.83 volts 90
Frequency Response 2500 - 20k Hz
Minimum RMS Wattage 10
Maximum RMS Wattage 90
Peak Power Handling (Watts) 180
Top-mount Depth (Inches) 0 3/4
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 2

Product Research

Features

Crossovers: The crossover's input and output wires are attached. The 12" output wire has quick slides attached so the tweeter is easily connected. The 60" input wires are terminated with tinned bare wire. The crossover point is 4 kHz and the slope is 18 dB/octave.

Crossover Dimensions:

  • Width: 1-3/8"
  • Length: 3-7/8"
  • Height: 7/8"

Tweeter Mounting Options: The tweeters can be flush mounted or surface mounted using the included hardware. Once installed in either housing, the tweeter will pivot approximately 15° in any direction.

Tweeter Dimensions:

  Frame Diameter Cutout Diameter Mounting Height Mounting Depth
Flush Mount 2.235" 1.967" 0.318" 0.706"
Surface Mount 2.2" N/A 1.035" 0.64" (Screw Depth)

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
specs look good for my setup [ michael  Jul 28, 2018 ]
A
Quality. [ ELLIOTTE J  Feb 06, 2018 ]

1 question already asked

Q
How can I attach these tweeters to a 4-Speaker system which is powered by an amplifier?
[ John  May 14, 2014 ]
1 answer
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the install. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
[ Krissy  May 15, 2014 ]  Staff

Loading articles...

TOP