Mobile DVD Player: The Alpine DVE-53000 is an add-on mobile DVD player
X109-WRA navigation receiver, or many other in-dash
multimedia receivers that features a video monitor and HDMI input.
Disc Compatibility: The Alpine DVE-53000 supports playback of
DVD-Video, CD-Audio, CD-R/RW, DVD-R/RW, and DVD+R/RW discs.
MP3/WMA/AAC/WAV Playback: The DVE-5300 will play back
AAC, & WAV music files recorded onto a CD-R/RW, DVD-R/RW, or DVD+R/RW disc.
Discs must be formatted with ISO9660 Level 1 or Level 2. A disc can hold a total
of 256 music folders and 4,096 music files.
Frequency ||Bit Rate/Bit
|MP3 ||8, 11.025, 12, 16, 22.05, 24, 32,
44.1, & 48kHz ||8-320kbps |
|WMA ||8, 11.025, 16,
22.05, 32, 44.1, & 48kHz ||8-320kbps |
|AAC ||8, 11.025, 16, 22.05, 24, 32,
44.1, & 48kHz ||8-384kbps |
|WAV ||44.1kHz ||16-bit |
DivX Compatible: The DVE-5300 mobile DVD player will also play
back DivX video files (version 3/4/5/6) recorded onto DVD-R/RW and DVD+R/RW discs.
DivX video files should have an optimum resolution of 96-720 (h) x 96-576 (v).
24-Bit DAC: The Alpine DVE-53000 utilizes a 24-bit DAC for exceptional
audio sound from your DVDs and CDs.
Dolby Digital/DTS: The DVE-53000 supports Dolby Digital and
DTS through its HDMI (up to 2ch) and optical (up to 5.1ch) digital outputs.
HDMI Output: The DVD-5300 mobile DVD player features an HDMI output
for audio/video transfer to a compatible in-dash receiver with a HDMI input and
video monitor. The HDMI output supports up to 480p video and 2.0ch audio.
Optical Digital Output: The mobile DVD player is also fitted with an
optical (toslink) digital output to connect to Alpine's PXA-H800 digital audio
sold separately) or other brand of digital audio processor with an optical
digital input. You'll also need the Alpine RUX-C800 wired remote controller (500RUXC800,
sold separately) for control when connecting the Alpine PXA-H800 digital audio
processor. The optical digital output supports Dolby Digital 5.1ch and DTS
Remote Control w/ IR Receiver: The Alpine DVE-5300 comes with an IR remote control
& a 5' IR receiver cable
for wireless operation of the DVD player. The IR receiver cable plugs into the
2.5mm remote jack on the back of the DVD player. The IR receiver needs to be
mounted in a location where the player's remote can be pointed directly at it;
the IR receiver mounts with two-sided tape. The only control function on the
front-panel of the DVD player is the "Eject" button.
Touchscreen Control: The included wiring harness features remote leads
which can be connected to your compatible Alpine navigation receiver for control
of the DVD player through the navigation receiver's touchscreen display.
Playback & Search Functions: The Alpine DVE-5300 offers
various playback & search functions. Playback functions include Play, Pause,
Stop, Repeat, & Random (Mix). Search functions include Skip (previous/next
track), Fast Forward, Rewind, Frame-by-Frame, Folder/File Search, and Direct
Mounting Options: The Alpine DVE-5300 DVD player's compact
chassis can be mounted in your vehicle's dash, in the glove box, under a seat, or
in any other free
compartment space. The player comes with hook-and-loop fasteners and 4 screws. The maximum mounting angle for this player is 30°.
Power & Ground: The Alpine DVE-5300
comes with a power & ground harness. The wiring harness will need to be
hardwired to +12V constant, +12V accessory, and ground inside your vehicle.
- Frequency Response: 5-20,000Hz (±1 dB)
- Total Harmonic Distortion (at 1kHz): 0.02%
- Dynamic Range (at 1kHz): 95 dB
- Signal-to-Noise Ratio: 95 dB
- Channel Separation (at 1kHz): 65 dB
- Signal-to-Noise Ratio (Video): 60 dB
- Video Resolution Output: 480p
- Power Requirements: 14.4 V.DC (11-16V allowable)
- Width: 6.75"
- Height: 2.0"
- Depth: 5.9375"
- Weight: 2.625 lbs