About the Alpine HCE-C114
Back up better
Back up better
Alpine's HCE-C114 backup camera is an excellent add-on when you're buying a new touchscreen car stereo. With low light capability and a wide viewing angle, you'll have a perfect picture of what's behind your vehicle, day or night.
This tiny camera measures less than one square inch, so it'll fit just about anywhere. The package includes a 21-foot cable with composite video RCA plugs that allows the camera to connect to any in-dash receiver or front-mount screen with a composite video input.
Looking for another mounting option? The HCE-C114 is compatible with Alpine's KTX-C10LP license plate mounting kit (not included).
- backup camera with standard composite (RCA) video cable
- mounting hardware and 21-foot power/video cable included
- compatible with any radio with an RCA video input (most aftermarket models, only a few factory)
- 1/4" CMOS image sensor
- color video output
- illumination range: 1.5 to 100,000 lux
- weather-proof camera housing
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # HCE-C114
What's in the box:
- Rear-view camera (attached 5' power/ground cable)
- 23' Composite video cable
- Mounting bracket
- Rubber sleeve
- 4 Large screws
- 2 Small screws
- Owner's Manual
- Online Product Registration note
More details on the Alpine HCE-C114
Features & specs
|Features and Specs|
|Lux Rating||1.5 lux (min)|
|Horizontal Viewing Angle||132 deg|
|Vertical Viewing Angle||105 deg|
|Plug type||Composite video|
Universal Rearview Camera: Add the Alpine HCE-C114 universal rearview camera to your vehicle's aftermarket in-dash receiver with monitor for added safety when backing in and out of a parking space. The rearview camera assists you, the driver, in checking behind your vehicle by sending images to your in-dash receiver's monitor, showing conditions behind the car.
Note: This rearview camera is meant as a back-up aid only; never solely rely on the rearview camera when backing-up. In addition to using the rearview camera, always look behind you to make sure everything is clear when backing up your vehicle.
1/4" CMOS Image Sensor: The HCE-C114 is equipped with a 1/4" CMOS image sensor with an effective resolution of 640 x 480 (307,000 total pixels). The image sensor offers automatic metering and automatic white balance adjustment for high-quality rearview images. The image sensor has an illumination range of 1.0 to 100,000 lux.
Wide-Angle Lens: The rearview camera's wide-angle lens has a focal length of f=1.28mm and brightness of f=24, with a 132° (h) x 105° (v) field of view. Because this is a wide-angle lens, there is a difference in distance perspective between what is normally seen behind the vehicle and what appears on the screen of your in-dash receiver.
Weatherproof Housing: The Alpine HCE-C114 employs a weatherproof (IP67) housing to protect the backup camera from the outdoor elements.
Composite Video Output: The included 23' composite video cable allows you to connect the Alpine HCE-C114 universal rearview camera to any aftermarket receiver with a composite video camera input and built-in screen. You can also swap out the 23' composite video cable for a shorter or longer composite video cable.
Power & Ground Harness: The Alpine HCE-C114 features an attached 5' power & ground harness. The power wire (red) of the harness must be connected to the positive side of your vehicle's rear lamp, while the ground wire (black) needs to be connected to your vehicle's metal chassis.
Included Mounting Bracket: The included mounting bracket allows you can be install the backup camera on the rear bumper or by the license plate of your SUV, truck, van, or car. The mounting bracket attaches to the camera with two included screws. The mounting bracket also has an adhesive backing, along with four included screws to secure the camera to your vehicle. Once mounted, you can adjust and tilt the mounting bracket up or down for the best camera angle and view.
Optional License Plate Mount Kit: The HCE-C114 rearview camera is compatible with Alpine's KTX-C10LP rearview camera license plate mounting kit (500KTXC10L, sold separately).
The Alpine HCE-C114 replaces these items
- rear-view camera with standard composite (RCA) video cable
- 132-degree horizontal and 105-degree vertical viewing angles
- mounting hardware and 11-3/4' power/video cable included
Q Crutchfield asked: Why did you buy this?
4 questions already asked