About the Alpine SPS-600C
Alpine's Type-S component speaker systems fill your vehicle with high-quality sound at a reasonable cost. These rugged components combine outstanding materials with superior construction, so they'll deliver sweet sound in your car for years to come.
The SPS-600C component speaker system features 6-3/4" woofers that pound out strong bass with their lightweight polypropylene-mica cones. Air-injected rubber surrounds control the woofers so they hold their shape while moving freely, eliminating distortion and enhancing bass. Stamped steel frames provide rugged support for these speakers, and their low profile allows them to fit in most factory locations, including most 6-1/2" openings.
Mount the 1" silk dome tweeters separately in a location closer to your ears, and you'll hear all the high-frequency details broadcast clearly without a hint of harshness. You can also swivel these tweeters up to 10 degrees to improve the stereo image at your listening position.
The built-in crossovers make sure the highs and lows go where they're supposed to, for a smooth, natural sound. An efficient design allows these speakers to work well with a low-power receiver, while the rugged internal parts can handle the high-power output of an outboard amplifier.
Priced per system
Product highlights:
- component speaker system includes two woofers, two tweeters, and two built-in crossovers
- 6-3/4" polypropylene-mica woofer cone with air-injected rubber surround
- woofer fits 6-1/2" and 6-3/4" speaker openings
- 1" silk dome tweeter
- power range: 2-80 watts RMS (240 watts peak power)
- frequency response: 70-22,000 Hz
- sensitivity: 88 dB
- top-mount depth: 2-1/4"
- warranty: 1 year
- MFR # SPS-600C
What's in the box:
Alpine SPS-600C owner's manual
- 2 Woofers
- 2 Woofer grilles
- 2 Tweeters (each tweeter has an attached 28" length of wire)
- Two Tweeter grilles (installed on tweeters)
- Two Swivel flush mounts (installed on tweeters)
- 2 In-line crossovers (each in-line crossover features a 12" length of wire attached to one end and a 22" length of wire attached to other end)
- 2 Woofer adapter rings
- 2 Flush mount retention rings
- 2 Stealth brackets
- 2 Foam self-adhesive pads
- 2 Foam self-adhesive rings
- 8 Mounting screws
- 8 Machine screws
- 8 Speed-clips
- Warranty Sheet
- "Important Notice!" note
Featured video:
Customer reviews for Alpine SPS-600C
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Alpine SPS-600C
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Poly-mica | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 88 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 70 - 22k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 80 | |
Peak Power Handling (Watts) | 240 | |
Top-mount Depth (Inches) | 2 1/4 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 1/2 | |
Mounting Height (Inches) | 0.325 | |
Frame Width | 6.228 | |
Frame Length | 6.228 |
Product Research
Woofers
Poly-Mica Cone: Each woofer features a Poly-Mica cone. Mica adds strength and heat resistance to polypropylene, resulting in reduced distortion and improved reliability. In addition, each woofer features an Phase Integrated Dustcap.
Air-injected Rubber Surrounds: For a smoother response and improved durability, the woofers use air-injected rubber surrounds.
Shallow-Design: The woofer features a stamped steel shallow frame. This shallow mounting design allows for easier installation in a wide range of door panels giving you a perfect fit.
Tweeters
1" Wide-Range Silk Dome Tweeters: The 1" wide-range silk dome tweeters offer clean, non-fatiguing sound even under extreme high frequency demands.
Tweeter Mounting Options: The tweeters may be flush mounted using the supplied flush mount bracket and ring. Once mounted, the tweeters are adjustable and may be swiveled 10 degrees for optimum imaging. The tweeters can also be mounted in factory tweeter locations behind factory tweeter grilles using the supplied stealth mounting bracket.
Flush Mount (swivel) | Factory Location (bottom mount) | Factory Location (top mount) | |
---|---|---|---|
Mounting Depth | 0.715" | 1.105" | 0" |
Mounting Height | 0.375" | N/A | 0.805" |
Cutout Diameter | 2.005" | 1.715" | N/A |
Frame Diameter | 2.275" | 2.955" | 2.554" |
Crossovers
In-Line Crossovers: The Alpine SPS-600C features a low-pass crossover attached to each woofer's speaker terminal. The Type-S component speakers also feature a high-pass crossover attached to each speaker wire lead going from the woofer to the tweeter.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
The speakers/tweeters sound great. The lows sound good enough I am almost considering not adding a sub to the system. I am very happy with this purchase and can't believe that I almost didn't get these because of the one review that talked bad about the tweeters.
fordluvr_1 from Montrose, CO