About the PAC RP3-GM13 Wiring Interface
PAC RP3-GM13 interface
PAC RP3-GM13 interface
PAC's RP3-GM13 interface allows you to replace the radio in your 2000-2005 Buick, Oldsmobile, or Pontiac. It retains the factory amp (if equipped) and offers the speed, reverse, and emergency brake outputs you'll need for installing a navigation receiver. The interface also provides a retained accessory power (RAP) output. This PAC interface will not retain OnStar.
The interface gives you four levels of volume adjustment for the safety chime. It also offers a plug-in connection to PAC's SWI-RC steering wheel control module (sold separately), which allows you to keep your steering wheel audio controls with select replacement radios. Warranty: 1 year.
More details on the PAC RP3-GM13 Wiring Interface
Radio Replacement Interface: The PAC RP3-GM13 interface allows aftermarket head unit replacement of the factory radio in select General Motors (GM) vehicles with a Class II databus and harness dock system. Using this interface will retain factory features such as the factory amplifier, retained accessory power (RAP), Warning Chimes, and steering wheel controls (additional adapter required).
Note: The PAC RP3-GM13 does not retain factory OnStar.
Vehicle Compatibility: The The PAC RP3-GM13 is compatible with the following 2000-2005 GM vehicles featuring a Class II databus and harness dock factory system.
Factory Amplified & Non-Amplified System Compatible: The PAC RP3-GM13 is compatible with Bose amplified and non-amplified factory audio systems. It will retain balance & fade control for factory Bose amplifiers (if applicable).
Retained Accessory Power (R.A.P.): The ignition power source of most GM vehicles keeps the radio on until one of the doors is opened. This feature is called the R.A.P. (retained accessory power). The PAC RP3-GM13 is designed to retain this feature.
Warning Chimes: The PAC RP3-GM13 radio replacement interface will retain your vehicle's important factory warning chimes.
Steering Wheel Controls: The PAC RP3-GM13 will retain your vehicle's factory steering wheel controls with the use of an aftermarket head unit with a SWC input and PAC's SWI-RC steering wheel control interface adapter (541SWIRC, sold separately).
Navigation Outputs: The PAC radio replacement interface provides a VSS (vehicle speed sense), Parking Brake, and a Reverse Gear output to make installing an aftermarket navigation radio simpler and less time consuming.
Wiring Connection Chart: The included wiring harness features the following hardwire connections.
|Red||+12 Volt Accessory|
|Yellow||+12 Volt Constant|
|White||Left Front Speaker +|
|White/Black||Left Front Speaker -|
|Gray||Right Front Speaker +|
|Gray/Black||Right Front Speaker -|
|Green||Left Rear Speaker +|
|Green/Black||Left Rear Speaker -|
|Purple||Right Rear Speaker +|
|Purple/Black||Right Rear Speaker -|
|Red/White||Parking Brake Detection (-)|
|Green||Reverse Output (+)|
RadioPRO App: PAC offers a Windows compatible RadioPRO App software program to help you configure the interface.
1 question already asked