Chat
Contact us
Close contact box
Connect ID #
427 711 44
Connect ID #
427 711 44
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

All of our representatives are
currently chatting with other customers.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-888-292-2575

Thank you, !
Our conversation will be emailed to

Your Advisor,

More about me
Please enter a question  
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  

Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Rockford Fosgate M5-1500X5

M5 Series marine 5-channel amplifier — 100 watts RMS x 4 at 4 ohms + 600 watts x 1 at 2 ohms

Item # 575M515005

Rockford Fosgate designed this M5 Series amplifier for marine and powersports environments, using a special...

Rockford Fosgate designed this M5 Series amplifier for marine and powersports environments, using a special...

Item # 575M515005

In stock
C$1,149.99

About the Rockford Fosgate M5-1500X5

M5 Series Element Ready™ amplifier

Rockford Fosgate designed this M5 Series amplifier for marine and powersports environments, using a special "Element Ready" chassis and conformal-coated PC boards to protect against dust and water. The M5-1500X5 amplifier can send 100 watts RMS to four different speakers, plus up to 600 watts RMS to your marine sub. You can adjust the high- and low-pass filters, infrasonic filter, and Rockford Fosgate's famous Punch boost to get the best possible bass from your speakers and subs.

M5 Series Element Ready™ amplifier

Rockford Fosgate designed this M5 Series amplifier for marine and powersports environments, using a special "Element Ready" chassis and conformal-coated PC boards to protect against dust and water. The M5-1500X5 amplifier can send 100 watts RMS to four different speakers, plus up to 600 watts RMS to your marine sub. You can adjust the high- and low-pass filters, infrasonic filter, and Rockford Fosgate's famous Punch boost to get the best possible bass from your speakers and subs.

Ready for the great outdoors

The amp also features a UV-stable, powder-coated, cast-aluminum heatsink to help prevent corrosion, while heavy-duty molded connectors protect wiring, keeping out water and dirt. In fact, this amp earned its IPX6 water intrusion rating after being sprayed with 100 liters of water per minute from a distance of 10 feet from all directions for at least 3 minutes. Translation? This amp will deliver reliable power through all kinds of abuse, whether it's out on the water or deep in the wilderness.

Setting it up for optimum performance

Rockford Fosgate's C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your music will sound as clean and powerful as possible. It's a simple system to use — turn it up until the light shows red, then turn it down until the red light goes out. If you're adding this amp to a Rockford Fosgate UTV audio kit, just press the Preset button and it's instantly tuned for maximum performance.

READ LESS

Product highlights:

  • 5-channel marine subwoofer amplifier
    • 100 watts RMS CTA-2006 x 4 + 400 watts RMS x 1 at 4 ohms
    • 100 watts RMS CTA-2006 x 4 + 600 watts RMS x 1 at 2 ohms
    • 400 watts RMS CTA-2006 x 2 at 4 ohms + 600 watts RMS x 1 at 2 ohms
    • max Dynamic Power rating: 200 watts x 4 + 700 watts x 1 at 2 ohms
  • amplifier design: Class AD (channels 1-4); Class BD (sub channel)
  • frequency response: 10-50,000 Hz
  • variable low-pass and high-pass filters (50-250 Hz, 12 dB/octave)
  • switchable subsonic filter (30 Hz, 12 dB/octave)
  • variable bass boost (0-18 dB at 45 Hz)
  • marine features:
    • Element Ready™ chassis and conformal-coated PC boards
    • IPX6 water intrusion rating
    • heavy-duty molded connectors protect wiring from water and dirt
    • Preset button for instant tuning in Rockford Fosgate UTV audio packages
More Info:
  • C.L.E.A.N. gain setup system includes clip lights
  • auto remote turn-on
  • preamp and speaker-level inputs
  • preamp outputs
  • wiring, fuse, and hardware not included with amplifier
    • 4-gauge power and ground leads and a 200-amp fuse recommended
  • dimensions: 17"W x 1-13/16"H x 4-1/4"D
  • warranty: 2 years
  • Our 60-day money-back guarantee
  • MFR # M5-1500X5

What's in the box:

  • 5-Channel powersports amplifier
  • 11" Power/ground/turn-on & subwoofer output harness (installed on amp)
  • 11" Input harness (installed on amp)
  • Three 14" RCA-to-Molex input adapters
  • Power/ground/turn-on adapter plug
  • Subwoofer output adapter plug
  • Two 7.5" speaker output harnesses
  • 3mm Allen key
  • Owner's manual
  • Performance certificate
  • Contact information

Customer reviews

We don't have any reviews, yet.
Be the first to review this product

Loading reviews...

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

Product Research

Features
Controls
Connections

Features

Overview: The Rockford Fosgate M5-1500X5 is a 5-channel powersports amplifier with a rated power output of 100 watts per channel at 4-ohms or 2-ohms for the four main channels, and 400 watts @4Ω/600 watts @2Ω for the subwoofer channel. This Element Ready amplifier can be used on motorcycles, ATVs, UTVs, or boats, and can withstand harsh environmental conditions.

CEA-2006 Compliant: CEA-2006 is a system of testing and measurement methods for mobile audio amplifiers. This voluntary standard advocates a uniform method for determining an amplifier's RMS power output and signal-to-noise ratio. The criteria for measuring power uses a DC input voltage of 14.4 volts and the RMS power output is measured into a 4Ω load with 1% or less Total Harmonic Distortion plus noise (THD+N). CEA-2006 allows consumers to compare amplifiers and receivers under identical conditions. The CEA-2006-rated RMS power output is 100 watts RMS x 4 channels. Additionally the power output is 100 watts RMS x 4 channels into 2Ω and 200 watts RMS x 2 channels bridged (into 4Ω). The subwoofer output is rated for 400W x 1 @4Ω, 600W x 1 @2Ω, and 600W x 1 @1Ω.

Element Ready: Rockford Fosgate's Element Ready Amplifiers are protected against dust, UV rays, and corrosion. Marine-grade, two-part epoxy-coated circuit boards are used to prevent corrosion due to exposure in moist and humid places. In addition, stainless hardware is used to help prevent rust and corrosion of all electrical connections. The M5-1500X5 carries an IPX6 rating, making it impervious to water spray.

Amp Class: The M5-1500X5 features Rockford Fosgate's proprietary Class-AD technology for the front & rear speaker channels and Class-BD for the subwoofer channel. This allows the amplifier to produce more power with less current draw from the vehicle's charging system.

MEHSA 4 Cooling: The amplifier features Rockford Fosgate's MEHSA 4 (Maximum Efficiency Heat Sink Application) technology that reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output circuitry's life span.

DSM (Discrete Surface Mount): High speed robotics are used in the manufacturing process to place 1% tolerance parts and large board traces. DSM improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

CLEAN Set-Up: Rockford's integrated level setting technology, CLEAN (Calibrated Level Eliminates Audible Noise), replaces sophisticated test equipment with input/output clip LEDs, allowing you to match the source unit's output to the amp's gain, and optimize the amp's output. The input clip indicator works in conjunction with the audio source volume, illuminating red when the source reaches its clipping point. The output clip indicator works in conjunction with the input level dial on the amp, illuminating the appropriate color depending on the audio content used for the setup.

Controls

PRESET: The M5-1500X5 features Rockford Fosgate's PRESET setting (On/Off) that eliminates the need to set-up the amplifier when used with a compatible Rockford Fosgate ATV/UTV Stage 3 or Stage 4 audio kit (sold separately). When set to On, the PRESET circuitry automatically optimizes the front, rear, and subwoofer input levels, Punch EQ, and crossover settings. If manually setting these adjustments, the PRESET switch should be set to the Off position. Individual PRESET switches are provided for the front, rear, and subwoofer outputs.

Input Level: The amplifier has dual input level controls for the front and rear channels, conveniently accessible from the top. To accommodate the varying range of signal levels from today's factory and aftermarket radios, the input levels are adjustable from 150mV to 12V. A small flat-head screwdriver (not supplied) is needed to adjust the levels.

Crossover: The amplifier has three built-in crossovers for the front, rear, and subwoofer channels. All three crossovers are variable from 50Hz to 250Hz with a slope of 12dB/octave. The front and rear channels can be independently set to high-pass, all-pass (full range), or low-pass operation, while the subwoofer channel is set for low-pass operation. The rotary frequency settings can be adjusted with a small screwdriver.

Punch EQ: The amplifier has two Punch EQ functions (for front and rear) that change with the crossover switches. When the crossover is set to low-pass, the Punch EQ acts as a variable bass boost; 0 to +18dB at 45Hz. When the crossover is set to high-pass, the Punch EQ acts as a variable treble boost, 0 to +14dB at 12.5kHz. When the crossover is set to all-pass, both the bass and treble boost circuits are active. The subwoofer channel's Punch EQ acts as a variable bass boost only.

Connections

Power Connections: The M5-1500X5's power, ground, and remote turn-on terminals are located on a single 11" harness with matching adapter. The adapter accepts up to 4 AWG wire (recommended) and features set-screws for locking the wire in place. The power/ground harness is combined with the subwoofer output harness and attached to the amp in one large connector that's held in place with 2 hex-socket screws.

Fuse: The amplifier does not have an on-board fuse. A 200-amp fuse should be placed on the power wire within 18" of the battery.

Speaker Connections: The amplifier is equipped with two 11" speaker output harnesses which are combined with the power/ground harness to one connector at the amplifier. Two 7.5" speaker harnesses plug into the output harnesses and provide bare-ended wire for connection to your speakers. Front and rear speaker outputs can be bridged to provide two 2 x 200W @4Ω outputs. The subwoofer output is a single channel and cannot be bridged.

Signal Input: The amplifier's Differential Inputs will accept either a line-level or speaker-level input on the Molex-style connectors. A single amp connector, secured with hex-socket screws to the amp, features three 4-pin Molex connectors on the other end for connecting the included input adapter harnesses. Each input adapter harness has a 4-pin Molex plug on one end and dual RCAs on the other end. Front and rear line-level signals can simply be connected via RCA cables from the source unit to each input harness. For a speaker-level signal, you can cut the RCA connectors from the input harnesses and splice the wires to the speaker wires of the source unit. When using a speaker-level input signal, the auto turn-on feature is active and the remote turn-on terminal becomes a 12 volt output, which can be used to turn on/off an additional amplifier or other component.

Loading accessories...

Customer Q&A

Loading articles...

TOP