About the Rockford Fosgate Punch P1652-S
Rockford Fosgate showcases their fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you impressive sound that'll stand out in a crowd.
Rockford Fosgate designed the Punch P1652 6-3/4" component system as a high-grade replacement for your factory speakers. Each speaker features a responsive polypropylene cone and butyl rubber surround that'll stand up to hours of high-volume jams. Rockford Fosgate uses a new technique to attach the surround to the cone that yields up to 25% more cone area, for fuller sound and stronger performance. The dome tweeters provide clear, extended highs that can hold their own when the bass gets heavy, and Rockford Fosgate includes flush- and surface-mount adapters.
Take a closer look and you'll notice a couple of cool innovations. The slots around the frame eliminate the need to redrill screw holes when the factory holes are just a little bit off. The crossovers are built into the woofer baskets, so there's no extra box to install. And these speakers come with adapter plates that allow them to fit into 6"x9" speaker openings.
Note: Rockford Fosgate describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.
Product highlights:
- component speaker system includes 2 woofers, 2 tweeters, and 2 woofer grilles
- mineral-filled polypropylene woofer
- butyl rubber surround
- 1" polyetherimide (PEI) dome tweeter
- crossovers (12dB at 5000 Hz) built into woofer baskets
- 6"x9" adapter brackets included
- Vertical Attach Surround Technique (VAST™) increases cone area
- power range: 6-60 watts RMS (120 watts peak power)
- frequency response: 60-22,000 Hz
- sensitivity: 89 dB
- top-mount depth: 2-5/16"
- warranty: 1 year
- MFR # P1652-S
What's in the box:
Rockford Fosgate Punch P1652-S owner's manual
- Two 6-3/4" Woofers
- 2 Woofer grilles
- Two 6x9 Adapter brackets
- Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors)
- 2 Front flush mount brackets
- 2 Rear flush mount brackets
- 2 Surface mounting housings
- 2 Trim rings
- Two M4x25mm Machine screws
- Two M4x10mm Machine screws
- Two M4x16mm Stud bolts
- Eight 1-1/4" Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other)
- Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian)
Customer reviews for Rockford Fosgate Punch P1652-S
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsCustomer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Rockford Fosgate Punch P1652-S
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | PEI | |
Woofer Composition | Mineral filled poly | |
Woofer Surround | Butyl rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 89 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 60 - 22k Hz | |
Minimum RMS Wattage | 6 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 120 | |
Top-mount Depth (Inches) | 2 5/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 9/16 | |
Mounting Height (Inches) | 0.409 | |
Frame Width | 6.785 | |
Frame Length | 6.785 |
Product Research
Features
Injection-Molded Polypropylene Woofers: The woofer cones are mineral filled, injection-molded polypropylene. This molding process assures a uniform cone thickness for superior linearity and clarity. It is also light weight and rigid for decreased distortion and improved bass response.
Butyl Rubber Surrounds: The butyl rubber surrounds dampen unwanted harmonic distortion while maintaining linear geometry under extreme weather conditions. This leads to less distortion, superior frequency response, and superior durability.
VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.
FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.
Adapter Bracket: For mounting flexibility, the woofers and tweeters can be mounted in 6x9 applications using the supplied brackets.
PEI Dome Tweeters: The 1" dome tweeters are made of Poly-Ether-Imide (PEI); PEI is a polymer film that produces a wide soundstage for superior imaging.
Mounting: The P1T-S provides multiple mounting configurations; choose flush or surface mount. The surface mount housing can be positioned at a 10° or 30° angle. Depending on the mount used, the installed dimensions are:
Flush | Surface 10° | Surface 30° | |
---|---|---|---|
Mounting Height | 0.393" | 1.048" | 1.065" |
Mounting Depth | 0.961" | Screw Depth | Screw Depth |
Frame Diameter | 2.128" | N/A | N/A |
Cutout Diameter | 1.745" | N/A | N/A |
Frame Width | N/A | 2.130" | 2.130" |
Frame Depth | N/A | 2.162" | 2.174" |
Crossovers: The high-pass crossovers are integrated into the baskets of the woofers. The slope is 12dB per octave and the crossover point is 3000 Hz.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Great all around speakers. Have them on a amp and they sound like a 7 or 800 dollar pair of speakers. Couldnt be happier.
Wayne from Georgetown KY