About the Rockford Fosgate P3SD2-12
Rockford's bass pedigree
Rockford's bass pedigree
Rockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real deal bass. Now, shallow-mount Punch Stage 3 subwoofers make it easier to get impressive low end in smaller or hard-to-fit vehicles.
The P3SD2-12 shallow-mount 12" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive, yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.
Powerful bass for a tight space
A low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-11/16 inches deep, this sub will fit into places where no bass has gone before — just build a custom enclosure or find a suitable box. The dual 2-ohm voice coils allow you to wire up multiple subs or to coax optimum performance from your amplifier.
- 12" shallow-mount subwoofer with dual 2-ohm voice coils
- anodized aluminum cone with M-Roll Santoprene surround
- power range: 50-400 watts RMS (200 watts per voice coil)
- peak power handling: 800 watts
- frequency response: 34-250 Hz
- sensitivity: 85 dB
- top-mount depth: 3-11/16"
- sealed box volume: 0.60-1.20 cubic feet
- ported box volume: 1.25 cubic feet
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # P3SD2-12
What's in the box:
- One shallow-mount 12" Dual 2-ohm voice coil woofer
- 1 Aluminum trim ring
- Eight 1-1/8" Allen head self-tapping screws
- 4mm Allen head bit
- Installation and Operation manual (English/ French/ Spanish/ German)
More details on the Rockford Fosgate P3SD2-12
Features & specs
|Cone Material||Anodized Aluminum|
|Ideal Sealed Box Volume (cubic feet)||1|
|Ideal Ported Box Volume (cubic feet)||1.25|
|Port diameter (inches)||4|
|Port length (inches)||12|
|Dual Voice Coil||Yes|
85 dB at 1 watt |
|Frequency Response||34 - 250 Hz|
|Max RMS Power Handling||400|
|Peak Power Handling (Watts)||800|
|Top Mount Depth (inches)||3 11/16|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||11 1/16|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Shallow Mount Design: The Rockford Fosgate Punch P3SD series shallow subwoofers are designed and engineered with a more shallow motor assembly which reduces the overall depth of the woofer, allowing it to fit in smaller locations in your vehicle. The P3SD2-12 uses an anodized aluminum cone and Santoprene surround. An anodized aluminum voice coil former and spider venting help keep the subwoofer cool.
Dual Voice Coils: This woofer features dual 2-ohm voice coils for wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 1-ohm load. When the voice coils are wired in series, the woofer presents a 4-ohm load.
CEA-2031 Compliant: Power handling on the P3SD2-12 subwoofer conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils.
FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.
VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.
Anodized Aluminum Voice Coil Former: Aluminum voice coil formers offer superior heat dissipation over other commonly used materials. The hard-anodized finish increases the former strength. These two factors combine to improve the overall power handling characteristics of the subwoofer.
Spring Post Assemblies: The woofer features custom insulated/isolated compression input terminals with attached flexible, 16-gauge stitched tinsel lead wires that can withstand extreme duty cycles, fatigue and high current. The heavy-duty spring posts will accept pin connectors, single banana plugs, and bare wire up to 10-gauge.
Trim Ring: For added cosmetic appeal the woofer comes with an aluminum trim ring that mounts over the flange of the woofer. When using the trim ring, the woofer is first mounted with four screws, then the ring is mounted over the woofer, aligning the final four holes of the woofer with ring. The other four screws are used in these holes to mount the ring and woofer to the enclosure. The trim ring increases the top-mounting height of the woofer to approximately one inch and the ring diameter is 13-3/8 inches.
Break-In Period: Due to the design of the Rockford Fosgate P3 Shallow subwoofer, a 24 to 48 hour break-in period is required to allow for maximum excursion and low frequency extension. The shallow woofer suspension is intentionally designed to optimize once the internal components are exercised under normal music listening conditions.
Sealed Box Volume: The sealed box size range recommended by Rockford Fosgate is 0.60 to 1.20 cubic feet. Within this range, the ideal recommended size is 1.0 cubic feet, resulting in a 3dB down point of 40 Hz and a Qtc of 1.01.
Vented Box Volume: The vented box size recommended by Rockford Fosgate is 1.25 cubic feet. One 4" diameter x 12" long port should be used, resulting in a tuning frequency of 42.5 Hz and a 3dB down point of 34 Hz.
4 questions already asked