About the Rockford Fosgate RFK-HD14
Amp up your 2014-up Harley
Rockford Fosgate's RFK-HD14 kit allows you to install a Rockford Fosgate Power or Punch Series compact-chassis amplifier in select 2014-up Harley Davidson cruising motorcycles. The kit includes everything you need to install your new amp, including wiring harnesses, power/ground, Boom Audio bypass plugs, and adapters for lower front and Tour-Pak speakers. You'll even get mounting screws.
Product Highlights:
- install a Rockford Fosgate compact-chassis amplifier in select 2014-up Harley-Davidsons
- everything you need to install your new Power or Punch amplifier
- mounting brackets for Shark Nose and Bat Wing fairings
- 8-gauge power and ground wire
- T-harness for easier connection
- Y-adapters for lower front and Tour-Pak speakers
- Boom Audio bypass plugs
- amp sold separately
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # RFK-HD14
What's in the box:
Rockford Fosgate RFK-HD14 owner's manual
- 1 Amp mounting bracket
- 1 Heatsink
- 34" T-harness
- 65" Power/ground harness w/ inline 60A Maxi fuse
- 20" Amplifier input harness
- 2 Amp output Y-adapters
- 5 Amp bypass plugs
- 4 Spacers w/ 3M adhesive backing
- Eight 8" wire-ties
- Two 16mm bolts
- Four 18mm counter-sunk screws
- Four 10mm counter-sunk screws
- Four 8mm hex-socket screws
- 2 Flange-nuts
- Installation guide
Reviews
Customer reviews
Loading reviews...
Rockford Fosgate RFK-HD14 reviews
Average review:
Customer photos
More details on the Rockford Fosgate RFK-HD14

Product Research
Features
RFK-HD14 Wiring Kit: The Rockford Fosgate RFK-HD14 amplifier wiring kit is specifically designed to install select Rockford Fosgate Power and Punch Series powersports amplifiers, including the Power Marine TM400Xad 4-channel amplifier, on select 2014-up Harley Davidson motorcycles. The kit includes pre-cut, pre-loomed 100% Pure Crystal-Oxygen Free Copper (PC-OFC) wiring for installing a sound system, meeting or exceeding American Wire Gauge (AWG) requirements. It includes 8-gauge power and ground wires for running to the battery, as well as all input and output harnesses for running signal from the headunit to the amp and then on to each individual speaker. Additional wiring includes Y-adapters for adding lowers or Tour-Pak speakers, Boom! Audio bypass plugs for factory amplified systems and a DSR1 loop-thru harness for adding an optional Rockford Fosgate DSR-1 processor (sold separately). The battery power wire includes an inline fuse holder with installed 60A Maxi fuse. The amplifier wiring kit also includes an additional amplifier heatsink, for better heat dissipation at higher volumes, and an amplifier mounting bracket. The amplifier heat sink includes pre-drilled and tapped screw holes for the TM400Xad, PM100X1, select Punch, and select Power 2-channel and 4-channel compact amplifiers.
Note: To retain proper fidelity and avoid speaker damage, your factory radio will need to be flashed by an authorized Harley-Davidson dealer after installing the Rockford Fosgate sound system.
Compatibility: The RFK-HD14 amplifier wiring kit is compatible with the following model Harley-Davidson motorcycles:
Year | Make | Model | Fairing |
2015-Up | Harley-Davidson | Road Glide CVO | Shark Nose |
2015-Up | Harley-Davidson | Road Glide Ultra | Shark Nose |
2015-Up | Harley-Davidson | Road Glide | Shark Nose |
2014-Up | Harley-Davidson | Street Glide CVO | Batwing |
2014-Up | Harley-Davidson | Electra Glide Ultra Classic | Batwing |
2014-Up | Harley-Davidson | Street Glide | Bat Wing |
Punch & Power Screw Hole Dimensions (center-hole to center-hole):
- Punch: 2.47" (W) x 6.24" (L)
- Power:
- 2-Channel: 0.92" (W) x 6.56" (L)
- 4-Channel: 0.92" (W) x 7.87" (L)
Loading accessories...
Customer Q&A
3 questions already asked
Loading articles...