Contact us
Close contact box

Rockford Fosgate T1S2-10

Power Series 10" 2-ohm component subwoofer

Item # 575T1S102

For decades, subwoofer makers have strived to have the biggest and most powerful subs.

For decades, subwoofer makers have strived to have the biggest and most powerful subs.

Item # 575T1S102

Ships from distributor

In stock
C$699.99 each

About the Rockford Fosgate T1S2-10

A new frontier

For decades, subwoofer makers have strived to have the biggest and most powerful subs. But in a market dominated by smaller cars and trucks, the focus has shifted to building high-performance subs that are small enough to fit in today's vehicles. Rockford Fosgate understands the need for great bass, and their Power Series T1 slim subwoofers deliver jaw-dropping performance without taking up a lot of space.

A new frontier

For decades, subwoofer makers have strived to have the biggest and most powerful subs. But in a market dominated by smaller cars and trucks, the focus has shifted to building high-performance subs that are small enough to fit in today's vehicles. Rockford Fosgate understands the need for great bass, and their Power Series T1 slim subwoofers deliver jaw-dropping performance without taking up a lot of space.

bottom view

The basket's aluminum fins aid in heat dissipation.

Big sound, small package

The Power Series T1S2-10 subwoofer uses a neodymium motor structure with high-strength magnets to help minimize mounting depth. Rockford Fosgate developed new construction technologies to fit a 3-inch voice coil in a 10" sub with a mounting depth of only 3", then used their Vertical Attach Surround Technique (VAST) to increase cone area for fatter bass. It all adds up to power handling of up to 500 watts RMS in a shockingly small package.

You'll love the big bass sound these subwoofers deliver, and you'll appreciate the slim design when you're looking for a place for boom in your vehicle.

READ LESS

Highlights:

  • 10" 2-ohm component subwoofer
  • carbon fiber/PMI/glass fiber cone with aluminum dustcap
  • injection molded foam surround
  • Vertical Attach Surround Technique (VAST) increases cone area
  • patent-pending motor technology
  • handles up to 500 watts RMS (1000 watts peak)
  • sensitivity: 83 dB
  • top mount depth: 3"
  • ported box volume: 1.25 cubic feet
  • grille not included
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # T1S2-10

What's in the box:

  • One shallow-mount 10" Subwoofer
  • 1 Trim ring (installed)
  • Twelve 1-5/8" Allen head self-tapping screws
  • 4mm Allen head bit
  • Installation and Operation manual (English/ French/ Spanish/ German/ Italian)

Customer reviews

Loading reviews...

Rockford Fosgate T1S2-10 reviews

Average review:

3 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Rockford Fosgate T1S2-10

Pat M.

Product Research

Features
Enclosure Compatibility

Features

CEA-2031 Compliant: The power rating on the T1S2-10 subwoofer conforms to CEA-2031 industry standards, meaning it has the capacity to handle its rated power under continuous demand.

Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Rockford Fosgate optimize the sub's motor structure, voice coil alignment, and suspension to yield the best possible performance.

EVCC: Rockford Fosgate's Encapsulated Voice Coil Coupling (EVCC, Patent Pending) technology connects to the subwoofer's voice coil from both the top and bottom and provides a more secure mounting platform for both the dual spiders and cone assembly.

SYMS: Unlike a traditional motor assembly, Split Yoke Motor Technology (Patent Pending) moves the magnet inside the voice coil. This design allows greater excursion than typical shallow subwoofers.

VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket.

FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.

Anodized Aluminum Voice Coil Former: Aluminum voice coil formers offer superior heat dissipation over other commonly used materials. The hard-anodized finish increases the former strength. These two factors combine to improve the overall power handling characteristics of the subwoofer.

Spring Terminals: The spring terminals are designed to accept up to 10-gauge wire.

Trim Ring: The T1S1-10 comes with an aluminum trim ring that mounts over the flange of the woofer. When using the optional T1SG-10 grille (item number 575T1SG10, sold separately), the grille is sandwiched between the subwoofer flange and the trim ring.

Enclosure Compatibility

Sealed Box Volume: The optimum sealed box volume is 0.8 ft³, with 0.5 ft³ to 1.0 ft³ acceptable. A 0.8 ft³ enclosure results in a 3dB down point of 40.3 Hz and a Qtc of 1.1 (enclosure damping).

Vented Box Volume: The recommended vented box volume is 1.5 ft³. One 4" diameter x 14-1/4" long port should be used, resulting in a tuning frequency of 40 Hz and a 3dB down point of 30 Hz. A subsonic filter set at or above 27 Hz is also recommended.

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
Always have been impressed with RF, Intrigued with the performance. [ Kody  Aug 07, 2019 ]
A
I'm hoping this can meet my expectations. I am currently rocking a RF P3410 Punch HE 10" but it can only handle 200WRMS. I am looking for a little more power, but I also need the shallow depth to fit this into the floor. [ Kevin  May 06, 2018 ]

7 questions already asked

Q
How do I wire the speaker to make sure I wire it 2 ohm?
[ Bigkat  Jul 17, 2019 ]
1 answer
A
Thank you for your question! The Rockford Fosgate T1S2-10, is has a 2ohm total impedance. If you're only using one of these speakers, you will have no special wiring guidelines to follow. Feel free to chat with an Advisor online or by phone at 1-800-324-9695. They'll be happy to help!
[ Jess  Jul 29, 2019 ]  Staff
Q
Can this sub be wired @ 1ohm?
[ Quinton  Jun 28, 2018 ]
1 answer
A
This subwoofer is a single voice coil and cannot be wired down to 1 ohm. We have subwoofers that can be wired to 1 ohm. I recommend calling an advisor on 1-800-324-9695 for a personal recommendation on a subwoofer that can be. My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101
[ Paul  Jul 02, 2018 ]  Staff
Q
Is the Punch P500X1bd amp with 300Wrms @ 2 Ohms enough to power this sub? Most Punch amps put out more Wrms on the birthsheet as opposed to the stated specs.
[ MICHAEL  May 10, 2018 ]
4 answers
A
Rockford Fosgate amps are famous for delivering significantly more than their advertised power. I bought this exact amplifier to push a Rockford Fosgate 12" punch subwoofer and it's turned way, way down. It's hard to go wrong with RF amps in general, and I'd say this will be a great match for your chosen sub.
[ Ray  May 23, 2018 ]
A
Yes the punch amp dos put out more power
[ Lenny  May 23, 2018 ]
A
The amp you specified needs to be paired with a 1ohm speaker in order to get a balanced power distribution between the two. In order to get good maximum sound quality.
[ Alex  May 22, 2018 ]
A
I think this amp will power this sub easily. The stated RMS power @ 1% THD on my amplifier's birth sheet is 766 watts as opposed to its 500 watts stated specs. Rockford amps always exceed the stated specs.
[ MICHAEL  May 22, 2018 ]
Q
Can I mount this in a downfire box with 2 1/4" behind the pole vent and 3" ground clearance? Going to raise the back seat on my 2010 f150 to gain a little more room.
[ Travis  Nov 01, 2017 ]
1 answer
A
Yes you can mount it in a downfire position. I have it downfireing in my center console on a 2016 escalade. I only had 1/2 in of clearance and it sounds great.
[ Elias  Nov 01, 2017 ]
Q
Anyone recommend these for a single cab chevy?
[ Michael  Nov 27, 2016 ]
1 answer
A
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.
[ Kenny  Nov 30, 2016 ]  Staff
Q
Is it one or two subs ?
[ Kingcera  Feb 22, 2016 ]
1 answer
A
One. You can se what comes in the manufacturer's packaging by clicking the "Details" tab on the woofer's main webpage. I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5
[ Ryan  Feb 24, 2016 ]  Staff
Q
Does this product come with a box?
[ Peluche  Jan 13, 2016 ]
1 answer
A
No I'm sorry, not included but we do have boxes available for purchase in many different sizes.
[ Kenny  Jan 13, 2016 ]  Staff
SHOW MORESHOW LESS

Loading articles...

TOP