Contact us
Close contact box

Rockford Fosgate T2S2-13

Power Series 13" 2-ohm Component Subwoofer

Item # 575T2S132

Rockford Fosgate has long been in the forefront of car speaker innovation, and they've taken their game to new...

Rockford Fosgate has long been in the forefront of car speaker innovation, and they've taken their game to new...

Item # 575T2S132

Ships from distributor

Out of stock
C$1,899.99 each

About the Rockford Fosgate T2S2-13

Pushing the envelope

Rockford Fosgate has long been in the forefront of car speaker innovation, and they've taken their game to new heights with their T2 Series subwoofers.The Power T2S1-13 subwoofer uses Rockford Fosgate's VAST cone attachment technique to achieve an increase of up to 25% in radiating cone area, allowing the 13" cone to deliver of some serious low-frequency thump. The cone's carbon fiber/honeycomb aramid/glass fiber construction keeps things solid even at high SPLs, so the sub can handle up to a massive 2000 watts RMS.

Pushing the envelope

Rockford Fosgate has long been in the forefront of car speaker innovation, and they've taken their game to new heights with their T2 Series subwoofers.The Power T2S1-13 subwoofer uses Rockford Fosgate's VAST cone attachment technique to achieve an increase of up to 25% in radiating cone area, allowing the 13" cone to deliver of some serious low-frequency thump. The cone's carbon fiber/honeycomb aramid/glass fiber construction keeps things solid even at high SPLs, so the sub can handle up to a massive 2000 watts RMS.

Boom inside

side view

The basket's aluminum fins aid in heat dissipation.

The T2's internal structure contributes to its high performance. The aluminum diecast frame integrates heat sink fins for maximum heat dissipation, and the triple-stacked segmented motor structure and 4-inch voice coil keep the bass booming even in extreme applications. And take a look — when isn't this Rockford Fosgate 13" subwoofer extreme?

This T2 sub represents another step forward for Rockford Fosgate, and could be just the step you've been waiting to take.

READ LESS

Highlights:

  • 13" 2-ohm subwoofer
  • carbon fiber/honeycomb aramid/glass fiber cone with aluminum dustcap
  • injection molded foam surround
  • Vertical Attach Surround Technique (VAST) increases cone area
  • handles up to 2000 watts RMS (4000 watts peak)
  • sensitivity: 87 dB
  • top mount depth: 12.28"
  • ported box volume: 2.5 cubic feet
  • grille not included
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # T2S2-13

What's in the box:

  • One 13" Single voice coil 2-ohm subwoofer
  • Trim ring (attached)
  • 12 Allen head screws
  • Allen head bit
  • Installation/Operation manual (English/ French/ Spanish/ German)

Customer reviews

Loading reviews...

Rockford Fosgate T2S2-13 reviews

Average review:

3 reviews

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Rockford Fosgate T2S2-13

Pat M.

Product Research

Features
Enclosure Compatibility

Features

Woofer: The woofer cone is a three layer design, glass fiber/aramid honeycomb/glass fiber with an aluminum dust cap.

VAST Surround: The Vertical Attach Surround Technique (VAST) increases a speaker's effective radiating cone area without increasing the size of the basket. The surround is made of injection molded foam.

Terminals: The spring loaded terminals will accept bare wire up to 8-gauge.

CEA-2031 Compliant: Power handling conforms to CEA-2031 industry standards. This means the subwoofer has the capacity to handle its rated power under continuous demand, not just for an instant.

Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and sophisticated software to do large-scale analysis of drivers in motion, lets Rockford Fosgate optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.

FlexFit Basket: The Flex Fit frame utilizes slots (where possible) instead of single screw sized holes; allowing slight adjustment of the speaker when mounted.

Enclosure Compatibility

Sealed Box: When using a sealed enclosure, Rockford recommends an ideal internal volume of 1.85 ft³ (1.0 ft³ to 2.0 ft³ acceptable), resulting in a -3dB point of 55.5 Hz and Qtc of 0.54. Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.

Ported Box: The recommended ported enclosure volume is 3.35 ft³ (4.0 ft³ minus 0.65 ft³ port displacement) with a slot port measuring 14" x 3" x 20-1/2", resulting in a tuning frequency of 38 Hz and a -3dB point of 32 Hz.

Loading accessories...

Customer Q&A

4 questions already asked

Q
What kind of amp will you meed for this t2s2 sub woofer?
[ Wezel  Jun 14, 2019 ]
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.
[ Krissy  Jun 26, 2019 ]  Staff
Q
Can I use Rockford Fosgate T1500-1bdcp to run t2s1-13 sub or do I need to get t2500-1bdcp amp?
[ Mosongela  Jan 14, 2016 ]
2 answers
A
I'm running 4 t3 and 4 bd 2500 the 1 ohm version. With box rise it's about 1.5 -4 ohms depending on the frequency if you don't have a great eclectic you won't get 2500 out of it. The 2500 is what I recommend with good alt and batteries
[ Titus  Jan 30, 2017 ]
A
You can certainly use the T1500-1 to power this sub but it will not realize the full power handling potential (2000 watts RMS). For that, yes, you could use the T2500-1 but would need to be careful with the gain setting to ensure you do not blow out the sub. I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5
[ Ryan  Jan 18, 2016 ]  Staff
Q
Hey I'm looking at this sub and was wondering how tall is this sub and how much clearance will it need between the bottom of the sub and the box?
[ Brian  Apr 10, 2015 ]
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Krissy  Apr 12, 2015 ]  Staff

Loading articles...

TOP