About the Marantz MM8077
An uncompromising recipe for sound quality
A peek at the innovative cooling tunnel on the Marantz MM 8077 7-channel power amp
An uncompromising recipe for sound quality
It can't be stated often enough: the overall quality of your entertainment system's sound is dependent on sufficient quantities of clean, instantly available power. There must be enough power. It must be pristine. And it must be available in an instant to give you the impact and full-frequency response you expect from today's deeply-layered and demanding movie soundtracks.
Respect for authority
So stand back. Take a look at the elegant, matte black Marantz MM8077 power amplifier from the front and tell me if your first impression is anything other than "authority." If you are at all skeptical, pick it up — great power components demand some mass. The '8077 is designed to deliver impressive power to seven channels with that same authority, so your surround sound experience will draw you into the action on your TV screen in a manner you've probably only experienced at a theater.
The Marantz MM8077's massive high current toroidal power transformer
Under the cover
Take a peek inside and you'll be even more impressed. The copper-plated chassis isolates the unit from outside noise, vibration, and electrical interference. A massive, high-current toroidal power transformer, paired with high power filter capacitors delivers the power you need in reserve for the short-term transients and peaks so common in both music and movie sound. And in order to give you the best possible performance from high-resolution audio formats, each channel has a current feedback discrete power amp output stage and multiple high-current discrete power transistors.
Heat, the enemy of power amp performance, is swiftly dealt with by way of an innovative dual extruded heat sink assembly with ultra-quiet fan cooling. The fan is cleverly mounted internally over the heat sinks and not to the chassis frame where it might be more easily heard.
The '8077 features both unbalanced RCA and balanced XLR inputs for all seven channels. Loudspeaker terminals are gold-plated to ensure the best possible signal transfer.
- 7-channel power amplifier
- 150 watts per channel into 8 ohms (20-20,000 Hz) at 0.08% THD, with 2 channels driven
- frequency response: 8-100,000 Hz (±3 dB)
- signal-to-noise ratio: 105 dB
- one unbalanced RCA and one balanced XLR input for each channel
- Discrete Current Feedback circuit for accurate, natural sound at all volume levels
- massive toroidal power transformer for high current and low noise
- DC trigger input/output
- D-Bus remote RC-5 input/output for connection to a compatible Marantz A/V preamp/processor
- IR flasher input
- gold-plated binding post speaker terminals
- detachable power cord
- 17-3/8"W x 7-3/16"H x 16-3/8"D
- weight: 45.41 lbs.
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # MM8077
What's in the box:
- 7-Channel power amplifier
- 6.5' AC power cord
- 4' Mono-RCA cable
- Owner's Manual
- US Warranty Information
- Canada Warranty Information
Marantz MM8077 reviews
Great amplifiers for my Klipsch speakers for my 9.2 home theater system. Good clear voice, Dolby and Atmos are very realistic. They trigger perfectly from the AV8505 and they run very cool with plenty of power.
0 of 0 found this helpful
Extremely pleased. Excellent sound/ plenty of power for my electrostatic speakers. Detect no distortion even at high volumes. Run very cool. Highly recommended!
Pros: Nothing bad to say
8 of 8 found this helpful
Not sure yet. I bought one in 2014 , same model and that is now in a repair shop. It started to shut itself off. It may have been a lemon . I am hoping this is not the case with this one, but too soon to tell.
Pros: At this point it sounds really good.
Cons: Hopefully the problems I have had with my other one will not be the same with this one.
4 of 15 found this helpful
The Marantz amp gives me enough power to play just about any classical work, some of which works need quite many watts. This is difficult to do with many amps but the 8077 takes it in its stride. Just yesterday I played an organ recording and it sounded as if the organ was right in front of me instead of speakers. All of this took place without any distortion. I feel even though it is not inexpensive, it is still a bargain and ordering it from Crutchfield is a good idea since they give you service for anything you buy from them which is more than any other company does.
Pros: Lots of power, easy to use, very clear sound
29 of 30 found this helpful
More details on the Marantz MM8077
Features & specs
|Number of Channels||7|
|Power Output per Channel (8 ohms)||150|
|Power Output per Channel (6 ohms)||180|
|Power Output per Channel (4 ohms)||0|
|Frequency Response||8Hz - 100k|
|Bridged Power per Channel||0 watts|
|Parts Warranty||3 Years|
|Labor Warranty||3 Years|
|Inputs & Outputs|
|Number of Inputs||7|
|Speaker Connectors||Binding post|
7-Channel Power Amplifier: The Marantz MM8077 seven-channel power amplifier delivers power and detail, and is rated at 150 watts (into 8-ohms, at 20-20k, with 0.08%, driving 2 channels) and 180 watts (into 6-ohms, at 20-20k, with 0.08%, driving 2 channels). The MM8077 power amp matches perfectly with the Marantz AV-8801 home theater preamp/processor (642AV8801, sold separately).
Current Feedback Discrete Amplifier Design: Featuring Marantz's unique current feedback discrete power amp output stages (with "push-pull circuitry) that are identical for all channels, the MM8077 is equipped with multiple high-current discrete power transistors that feature high slew rate along with low impedance drive capability, for maximum operating bandwidth and solid performance in order to extract the most detail from today's high resolution audio formats.
Copper Chassis w/Aluminum Resin Front-Panel: The copper-plated chassis provides isolation from extraneous noise, and features a multi-layer reinforced bottom panel assembly for maximum rigidity along with triple-layer top cover. The power amp's front-panel features a combination of aluminum extrusion and glass-reinforced resin which shields internal circuitry and absorbs internal and external resonances. The MM8077 features the classic Marantz ringed porthole display with a blue illumination accent that includes a display on/off function.
High Power, High Current Power Supply: The high power, high current power supply features a massive toroidal power transformer along with high power (71WVDC) filter capacitors with a total 100,000µF capacitance that provides substantial headroom for dynamic peaks along with the ability to handle lower impedance speaker loads.
Highly Efficient Heat Dissipation: The output devices are mounted on a dual extruded aluminum alloy heat sink assembly, configured in a tunnel arrangement that provides both passive and active cooling. The massive heat sinks feature multiple ribbed fins that provide a large passive cooling area, and the assembly is book-ended with a whisper quiet fan that automatically kicks in to provide near silent active cooling when the soundtrack heats up. As the fan is mounted internally directly to the heat sinks (and not externally to the chassis cover as is often the case) even when it's running, it's designed to be whisper quiet.
Unbalanced (RCA) & Balanced (XLR) Inputs: For maximum connectivity, the MM8077 features both unbalanced (RCA) and balanced (XLR) inputs for each of the seven channels. Each amp channel can be configured to use your choice of input connector.
Binding Post Speaker Terminals: The Marantz MM8077 is fitted with seven pair of binding-post speaker terminals. The binding-post terminals feature audiophile-grade construction, and are gold-plated for maximum signal transfer, and they can easily handle a wide range of audiophile speaker cable connectors (such as bare wire, single banana plugs, and pin-connectors).
DC Control: The MM8077 features DC trigger input/outputs (3.5mm) for external power on/off control. The DC trigger input allows the MM8077's power to be controlled by another device (5-15V). The DC Trigger output allows the MM8077 to control the power of another compatible device (12V/44mA).
Remote Power Control: Dual RC-5 remote control in/out RCA jacks allow for connection to a compatible Marantz components. When a compatible Marantz preamp is connected, this unit's power can be switched on and off simultaneously with the preamp. The RC-5 input is connected to the preamp, and the RC-5 output can be connected to other compatible Marantz components; CD player, DVD player, Tuner, etc.
Flasher Input: The IR flasher input is useful with universal remote controls; power and mute remote codes are available for the MM8077.
Low-Power Standby Mode: For environmental and energy-saving considerations, power consumption during standby mode has been reduced to less than 0.4 W.
Auto-Standby Mode: The MM8077 automatically switches to standby mode when there has been no signal for approximately 30 minutes. This prevents power from being wasted whenever you forget to turn the power off.
Q Crutchfield asked: Why did you buy this?
5 questions already asked