About the Posi-Products™ Car Stereo Wiring Harness Connectors
Posi-Products connectors help make your electrical connections fast, easy, and reliable with no crimping, soldering, or messy tape. Just strip your stranded wires, insert them in the caps, and then hand tighten the two caps together — the wire ends get locked between opposing cone shapes to create a water-, dirt-, vibration-, and heat-proof housing. You get a strong, low-resistance electrical connection, and you can reuse the connectors, too.
The Mobile Electronics Series Connector Kits come with various assortments of special Posi-Lock® and Posi-Tap™ connectors to integrate your aftermarket equipment into your vehicle's electrical system. Experienced installers have selected the contents of each kit carefully, so you can be sure you'll have all the right connectors necessary to get the job done.
This Car Stereo Connector Kit comes with 16 Posi-Twist™ connectors — enough to hook up the speakers, power, and accessories in most car stereo installations. Warranty: 60 days.
What's in the box:
- 16 Clear Posi-Twist connectors
Great little connectors, easy to use and don't need a wire crimper.
Eric from Minnetonka, MN
Do you need these with the wire harness that you can buy specific to your vehicle?
i did not use those, i soldered the cables together (most secured)
More details on the Posi-Products™ Car Stereo Wiring Harness Connectors
Overview: This kit comes with sixteen Posi-Twist connectors for installing an aftermarket head unit in your vehicle. Posi-Twist connectors replace old-fashioned wire nuts and crimp caps with stronger, more reliable connections. These connectors are compatible with two 18-20 gauge wires, up to four 22 gauge wires, up to five 24 gauge wires, and up to six 26 gauge wires. Just strip your stranded wires, insert them in the caps, and then hand tighten the two caps together - the wire ends are locked between opposing cone shapes to create a dirt-, vibration-, and heat-proof housing. The connectors are also reusable.
- Posi-Twist Connector:
- Length: 0.696"
- Overall Diameter: 0.285"
- Diameter of Hole in Cap: 0.145"